Search NASA⌕ Search

Engineering topics

Bonner, Ian

Publications and source records attributed to Bonner, Ian.

2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 2: Environmental Sustainability Effects of Select Scenarios from Volume 1

With the goal of understanding environmental effects of a growing bioeconomy, the U.S. Department of Energy (DOE), national laboratories, and U.S. Forest Service research laboratories, together with academic and industry collaborators, undertook a study to estimate environmental effects of potential biomass production scenarios in the United States, with an emphasis on agricultural and forest biomass. Potential effects investigated include changes in soil organic carbon (SOC), greenhouse gas (GHG) emissions, water quality and quantity, air emissions, and biodiversity. Effects of altered land-management regimes were analyzed based on select county-level biomass-production scenarios for 2017 and 2040 taken from the 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy (BT16), volume 1, which assumes that the land bases for agricultural and forestry would not change over time. The scenarios reflect constraints on biomass supply (e.g., excluded areas; implementation of management practices; and consideration of food, feed, forage, and fiber demands and exports) that intend to address sustainability concerns. Nonetheless, both beneficial and adverse environmental effects might be expected. To characterize these potential effects, this research sought to estimate where and under what modeled scenarios or conditions positive and negative environmental effects could occur nationwide. The report also includes a discussion of land-use change (LUC) (i.e., land management change) assumptions associated with the scenario transitions (but not including analysis of indirect LUC [ILUC]), analyses of climate sensitivity of feedstock productivity under a set of potential scenarios, and a qualitative environmental effects analysis of algae production under carbon dioxide (CO 2 ) co-location scenarios. Because BT16 biomass supplies are simulated independent of a defined end use, most analyses do not include benefits from displacing fossil fuels or other products, with the exception of including a few illustrative cases on potential reductions in GHG emissions and fossil energy consumption associated with using biomass supplies for fuel, power, heat, and chemicals. Most analyses in volume 2 show potential for a substantial increase in biomass production with minimal or negligible environmental effects under the biomass supply constraints assumed in BT16. Although corn ethanol has been shown to achieve GHG emissions improvements over fossil fuels, cellulosic biomass shows further improvements in certain environmental indicators covered in this report. The harvest of agricultural and forestry residues generally shows the smallest contributions to changes in certain environmental indicators investigated. The scenarios show national-level net SOC gains. When expanding the system boundary in illustrative cases that consider biomass end use, reductions in GHG emissions are estimated for scenarios in which biomass—rather than oil, coal, and natural gas—is used to produce fuel, power, heat, and chemicals. Analyses of water quality reveal that there could be tradeoffs between biomass productivity and some water quality indicators, but better outcomes for both biomass productivity and water quality can be achieved with selected conservation practices. Biodiversity analyses show possible habitat benefits to some species, with other species showing potential adverse effects that may require additional safeguards. Increasing productivity of algae can reduce GHG emissions and water consumption associated with producing algal biomass, though the effects of water consumption are likely of greater concern in some regions than in others. Moreover, the effects of climate change on potential biomass production show gains and losses in yield among feedstocks across the continental United States. Key research gaps and priorities include actions that can enhance benefits and reduce potential for negative effects of increased biomass production. The results from this report will help DOE, the bioenergy industry, and other institutions continue important discussions on environmental effects and will help chart a path toward a more environmentally sustainable bioeconomy.

54 ENVIRONMENTAL SCIENCES↗

2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 1: Economic Availability of Feedstocks

Consumption of renewable energy in the United States is the highest in history, contributing to energy security, greenhouse gas reductions, and other social, economic, and environmental benefits. The largest single source of renewable energy is biomass, representing 3.9 quadrillion of 9.6 quadrillion British thermal units (Btu) in 2015 (EIA 2016). Biomass includes agricultural and forestry resources, municipal solid waste (MSW), and algae. For more than a decade, the U.S. Department of Energy (DOE) has been quantifying the potential of U.S. biomass resources, under biophysical and economic constraints, for production of renewable energy and bioproducts. The 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy (BT16) evaluates the most recent estimates of potential biomass that could be available for new industrial uses in the future. BT16 consists of two volumes: Volume 1 (this volume) focuses on resource analysis—projecting biomass potentially available at specified prices. Volume 2 evaluates changes in environmental sustainability indicators— water quality and quantity, greenhouse gas emissions, air quality, soil organic carbon, and biodiversity—associated with select production scenarios in volume 1. The following is a summary of BT16 , volume 1.

09 BIOMASS FUELS↗

Biomass Logistics

Equipment manufacturers have made rapid improvements in biomass harvesting and handling equipment. These improvements have increased transportation and handling efficiencies due to higher biomass densities and reduced losses. Improvements in grinder efficiencies and capacity have reduced biomass grinding costs. Biomass collection efficiencies (the ratio of biomass collected to the amount available in the field) as high as 75% for crop residues and greater than 90% for perennial energy crops have also been demonstrated. However, as collection rates increase, the fraction of entrained soil in the biomass increases, and high biomass residue removal rates can violate agronomic sustainability limits. Advancements in quantifying multi-factor sustainability limits to increase removal rate as guided by sustainable residue removal plans, and mitigating soil contamination through targeted removal rates based on soil type and residue type/fraction is allowing the use of new high efficiency harvesting equipment and methods. As another consideration, single pass harvesting and other technologies that improve harvesting costs cause biomass storage moisture management challenges, which challenges are further perturbed by annual variability in biomass moisture content. Monitoring, sampling, simulation, and analysis provide basis for moisture, time, and quality relationships in storage, which has allowed the development of moisture tolerant storage systems and best management processes that combine moisture content and time to accommodate baled storage of wet material based upon “shelf-life.” The key to improving biomass supply logistics costs has been developing the associated agronomic sustainability and biomass quality technologies and processes that allow the implementation of equipment engineering solutions.

09 BIOMASS FUELS↗