Search NASA⌕ Search

Engineering topics

Borg, J.

Publications and source records attributed to Borg, J..

29 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Overview of the Results of the Organics PET Study of the Cometary Samples from Comet Wild 2 by the Stardust Mission

STARDUST is the first mission designed to bring samples back to Earth from a known comet. The captured samples were successfully returned to Earth on 15 Jan 2006, after which they were subjected to a preliminary examination by a number of teams of scientists from around the world. This abstract describes the efforts of the Organics Preliminary Examination Team (PET). More detailed discussions of specific analyses of the samples can be found in other papers presented at this meeting by individual members of the Organics PET (see the author list above for team members). The studied Wild 2 gas and dust samples were collected by impact onto aerogel tiles and Al foils when the spacecraft flew through the coma of 81P/Wild 2 on 2 Jan 2004 at a relative velocity of approx.6.1 kilometers per second. After recovery of the Sample Return Capsule (SRC) on 15 Jan 2006, the aerogel collector trays were removed in a clean room at JSC. After documentation of the collection, selected aerogel tiles and aluminum foils were removed and aerogel and cometary samples extracted for study.

Sandford, S. A.↗
NASA NTRS2007

SEM-EDS Analyses of Small Craters in Stardust Aluminum Foils: Implications for the Wild-2 Dust Distribution

Aluminium foils were used on Stardust to stabilize the aerogel specimens in the modular collector tray. Part of these foils were fully exposed to the flux of cometary grains emanating from Wild 2. Because the exposed part of these foils had to be harvested before extraction of the aerogel, numerous foil strips some 1.7 mm wide and 13 or 33 mm long were generated during Stardusts's Preliminary Examination (PE). These strips are readily accommodated in their entirety in the sample chambers of modern SEMs, thus providing the opportunity to characterize in situ the size distribution and residue composition - employing EDS methods - of statistically more significant numbers of cometary dust particles compared to aerogel, the latter mandating extensive sample preparation. We describe here the analysis of nearly 300 impact craters and their implications for Wild 2 dust.

Borg, J.↗
NASA NTRS2006

Elemental Compositions of Comet 81P/Wild 2 Samples Collected by Stardust

We measured the chemical compositions of material from 23 particles in aerogel and residue in 7 craters in aluminum foil, collected during passage of the Stardust spacecraft through the coma of Comet 81P/Wild 2. These particles are chemically heterogeneous at the largest size-scale analyzed, ~180 nanograms. The mean chemical composition of this Wild 2 material agrees with the CI meteorite composition for the refractory elements Mg, Si, Cr, Fe, and Ni to 35%, and for Ca and Mn to 50%. The data suggest the moderately volatile elements Cu, Zn, and Ga may be enriched in this Wild 2 material.

Flynn, G. J.↗
NASA NTRS1997

Analyses of Extraterrestrial Particles Collected Outside The Mir Station

The European Space Exposure Facility (ESEF) has flown two collection boxes (B1 and B2) outside the MIR station from October 1995 to February 1996, during the EST EUROMIR95 mission. B1 was opened only during the encounter with the Orionides meteor stream and the last 5 weeks of the mission, while B2 stayed open during the entire mission, except during docking operations on MIR, to minimise contamination. We describe here the results of the analyses performed on various passive collectors of the COMRADE experiment. We also indicate the improvements that will be given to the collecting techniques, in the objective of the future COMET-99 collection, programmed by French CNES.

Borg, J.↗
NASA NTRS1994

Main characteristics of the COMET/COMRADE experiments

Both the COMET (Collection en Orbite de Matiere Extra Terrestre) and the COMRADE (Collection of Micrometeorites, Residue and Debris Ejecta) programs are developed to the collection and analysis of the particles of various origins orbiting around the Earth at low altitudes (between approx. 300 and approx. 500 km). The COMET experiment is more specifically designed to be flown for a short period of time (a few days), in concordance with a meteor stream crossing the Earth. Thus, it results in a considerable enrichment in the collection of grains related to a given comet. The COMRADE experiment has been selected as a proposal for long-duration flights (a few months), in order to gain information on all sizes of particles present on low Earth orbits, including submicrometer grains. It has been accepted by ESA authorities for use on the EURECA 2 platform. The objectives of these studies are multiple. The use of passive detectors gives access to the chemical and isotopical properties of the grains in the micrometer size range, by analyzing either the particle remnant mixed with the target material, or the intact particle captured in a specific low-density material. The particle remnants of the micrometer-sized extraterrestrial grains, having impacted on purposely designed metallic collectors, are identified for complete and detailed chemical, isotopic, and organic analysis, thereby determining grain composition as well as the existence of organic and inorganic molecules, to be related with the possible cometary origin of the grains. Micrometer/submicrometer dust grains are also captured in a manner that ensures minimal particle degradation. The captured intact particles are returned to Earth for complete and detailed chemical, isotopic, spectral, mineralogical, and organic analysis.

Borg, J.↗
NASA NTRS1994

The intact capture of hypervelocity dust particles using underdense foams

The impact of a hypervelocity projectile (greater than 3 km/s) is a process that subjects both the impactor and the impacted material to a large transient pressure distribution. The resultant stresses cause a large degree of fragmentation, melting, vaporization, and ionization (for normal densities). The pressure regime magnitude, however, is directly related to the density relationship between the projectile and target materials. As a consequence, a high-density impactor on a low-density target will experience the lowest level of damage. Historically, there have been three different approaches toward achieving the lowest possible target density. The first employs a projectile impinging on a foil or film of moderate density, but whose thickness is much less than the particle diameter. This results in the particle experiencing a pressure transient with both a short duration and a greatly reduced destructive effect. A succession of these films, spaced to allow nondestructive energy dissipation between impacts, will reduce the impactor's kinetic energy without allowing its internal energy to rise to the point where destruction of the projectile mass will occur. An added advantage to this method is that it yields the possibility of regions within the captured particle where a minimum of thermal modification has taken place. Polymer foams have been employed as the primary method of capturing particles with minimum degradation. The manufacture of extremely low bulk density materials is usually achieved by the introduction of voids into the material base. It must be noted, however, that a foam structure only has a true bulk density of the mixture at sizes much larger than the cell size, since for impact processes this is of paramount importance. The scale at which the bulk density must still be close to that of the mixture is approximately equal to the impactor. When this density criterion is met, shock pressures during impact are minimized, which in turn maximizes the probability of survival for the impacting particle. The primary objectives of the experiment are to (1) Examine the morphology of primary and secondary hypervelocity impact craters. Primary attention will be paid to craters caused by ejecta during hypervelocity impacts of different substrates. (2) Determine the size distribution of ejecta by means of witness plates and collect fragments of ejecta from craters by means of momentum-sensitive mcropore foam. (3) Assess the directionality of the flux by means of penetration-hole alignment of thin films placed above the cells. (4) Capture intact the particles that perforated the thin film and entered the cell. Capture media consisted of both previously flight-tested micropore foams and aerogel. The foams had different latent heats of fusion and, accordingly, will capture particles over a range of momenta. Aerogel was incorporated into the cells to determine the minimum diameter than can be captured intact.

Maag, Carl R.↗
NASA NTRS1992

Further analysis of LDEF FRECOPA micrometeroid remnants

Experiments dedicated to the detection of interplanetary dust particles (IDP's) were exposed within the FRECOPA payload, installed on the face of the LDEF directly opposed to the velocity vector (west facing direction, location B3). We were mainly interested in the analysis of hypervelocity impact features of sizes less than or = 10 microns, found in thick Al targets devoted to the research of impact features. In the 15 craters found in the scanned area (approximately 4 sq. cm), the chemical analysis suggests an extraterrestrial origin for the impacting particles. The main elements we identified are usually refered to as chondrite elements: Na, Mg, Si, S, Ca, and Fe are found in various proportions, intrinsic Al being masked by the Al target; we notice a strong depletion in Ni, never observed in our samples. Furthermore, C and O are present in 90 percent of the cases; the C/O peak height ratio varies from 0.1 to 3. Impactor simulations by light gas gun hypervelocity impact experiments have shown that meaningful biogenic element and compound information maybe obtained from IDP residues below impacts of critical velocities, that are less than or = 4 km/sec for particles larger than 100 microns in diameter. Our results obtained for the smaller size fraction IDP's suggest that at such sizes, the critical velocity could be higher by a factor of 2 or 3, as chemical analysis of the remnants were possible in all the identified impact craters, performed on targets possibly hit at velocities greater than or = 7.5 km/s, which is the spacecraft velocity. These samples are now subjected to an imagery and analytical protocol that includes FESEM (field emission scanning electron microscopy) and LIMS (laser ionization mass spectrometry). The LIMS analyses were performed using the LIMA-ZA instrument. Results are presented, clearly indicating that such small events show crater features analogous to what is observed at larger sizes; our first analytical results, obtained for 2 events (P6 and P10) suggest that N is present in the IDP's remnants in which C and O were identified by EDX analysis. In one case (P6), enrichment in K and P is observed. Surface contamination by NaCl is evident on the FRECOPA surfaces.

Borg, J.↗
NASA NTRS1975

Solar-wind and solar-flare maturation of the lunar regolith

Detailed predictions concerning the depth and time-dependent accumulation of solar-wind effects and solar-flare tracks in lunar dust grains were obtained by use of an adaptation of a Monte Carlo soil-mixing computer code described by Duraud et al. (1975). The predictions are compared to experimental measurements obtained by analyzing lunar dust grains as well as artificially irradiated minerals by a variety of techniques. A study of amorphous coatings of solar-wind radiation-damaged material on certain lunar grains sets limits on the integrated residence time of these grains in the ancient solar wind. Other topics discussed include solar wind maturation, the peculiar shape of the experimental distribution of central track densities in 50-micron grains, and the interpretation of both track gradients in 50-micron feldspars and the relatively 'low' concentration of solar-wind species implanted in ilmenite grains.

Bibring, J. P.↗
NASA NTRS1974

Study of radiation damage and structure of Luna 16 sample particles using high-resolution electron microscopes

Using an electron scanning microscope and a high voltage microscope, a study was made of the radiation damage and structure of micron sized grains and grains separated from the 200-mesh fraction of the L-16-19 surface material sample. Then the structural features were compared with those found by studying with the same techniques grains separated from 20 different samples of lunar dust taken from the Apollo 11, Apollo 12, Apollo 14, and Apollo 15 collections. The L-16-19 sample is similar to the most intensely irradiated samples returned to earth by Apollo craft.

Borg, J.↗
NASA NTRS1974

Apollo 17 lunar surface cosmic ray experiment - Measurement of heavy solar wind particles

During the Apollo 17 mission a series of metal foils and nuclear track detectors were exposed both in the sun and in the shade on the surface of the moon. Here we give the analysis of the mica detectors which were used to measure the flux of solar wind particles of Fe-group and heavier elements. These particles register as shallow pits after etching in hydrofluoric acid. Calibration experiments were performed to determine the registration properties of different ions and to simulate the lunar environment. We obtain an Fe-group flux of 39,000 per sec per sq cm, which together with the H flux measured on IMP-7 gives an Fe/H ratio of 0.000041. For elements with Z exceeding 45 we can set only an upper limit on the abundance, ruling out an overabundance of extremely heavy elements relative to iron by a factor of 4.

Zinner, E.↗