Search NASA⌕ Search

Engineering topics

Borguet, Eric

Publications and source records attributed to Borguet, Eric.

34 records · Page 2

Synthesis and Properties of Au Hydride

The generation of chemical species from gases, noble metals and light interacting with localized surface plasmons represents a new paradigm for achieving low energy sustainable reaction pathways. Here, we demonstrate that the dissociation reaction of H 2 meditated by the decay of localized surface plasmons of gold nanoparticles leads to the generation of a new material as detected by a change in the optical properties of the gold nanostructures. The effective permittivity measured by in situ spectroscopic ellipsometry shows a blue-shift of 0.02 eV in the surface plasmon resonance, demonstrating the plausible formation of a metastable gold hydride layer on the surface of nanoparticles following the dissociation of H 2 . The formation of this gold hydride through the interaction of gold with atomic H is supported by first-principles simulations. These calculations do not indicate a significant charge transfer upon hydrogenation of the (111) surface but rather large Friedel charge oscillations within the gold layer. Moreover, our blue-shift is produced by the formation of a hydride leading to changes in critical band gaps in the electronic structure. For a coverage of 11%, the calculated peak of the imaginary part of the ZZ-component of the dielectric tensor undergoes a blue shift of 28 nm from a hydrogen free peak at 574 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Functional and Electron Correlation on the Structure and Spectroscopy of the Al 2 O 3 (001)–H 2 O Interface

Oxide–water interfaces are ubiquitous, with many applications in industry and the environment, yet there is a great deal of controversy over their properties and microscopic structure. This controversy stems, in part, from the unique H-bond networks formed at different surface terminations and mineral compositions. Density functional theory simulations of these interfaces require an accurate description of both the oxide mineral and water in diverse H-bond environments. Thus, herein we simulate the Al 2 O 3 (001)–H 2 O interface using the PBE, PBE-TS, RPBE, SCAN, and HSE06-TS functionals to determine how calculated interfacial properties depend on the choice of functional. We find that the structure of the first few layers of water at the surface is determined by electron correlation in a way that cannot be approximated using semiemipirical van der Waals corrections. Of the functionals investigated, we find that SCAN yields the most accurate interfacial structure, dynamics, and sum frequency generation spectrum. Furthermore, SCAN leads to a reduction in the order of the 2D H-bond network of water at the alumina surface predicted by GGA functionals, leading to a significant decrease in the anisotropy of the diffusion coefficient at the surface. We emphasize the importance of using a functional which accurately describes electron correlation for more complex oxides, such as transition-metal oxides, where electron correlation may play an even greater role in determining the structure and dynamics of the oxide–water interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrabroadband mid-infrared noncollinear difference frequency generation in a silver thiogallate crystal

In this study, we report the generation of ultrabroadband mid-infrared (mid-IR) pulses by noncollinear difference frequency mixing. The signal and the idler output beams of an optical parametric amplifier are combined in a silver thiogallate crystal (AgGaS 2 ) to generate mid-infrared radiation. We show that a noncollinear geometry facilitates broadband phase matching. Spectral bandwidths up to 1750 cm –1 were obtained at an external noncollinear angle of 4.2 deg, which is more than three times broader than in a collinear geometry. The broadband spectrum is tunable in the range of 1500–4500 cm –1 . Pulse energies up to 1 μJ were achieved. The broadband pulses were used in sum frequency generation in ZnSe and in vibrational absorption spectroscopy experiments of liquid samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic Doping of Cobalt into Layered Manganese Oxide Sheets Substantially Enhances Water Oxidation Catalysis

The effect on the electrocatalytic oxygen evolution reaction (OER) of cobalt incorporation into the metal oxide sheets of the layered manganese oxide birnessite was investigated. Birnessite and cobalt-doped birnessite were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and conductivity measurements. A cobalt:manganese ratio of 1:2 ended in the most active catalyst for the OER. Specifically, the overpotential (η) for the OER was 420 mV, significantly lower than the η = 780 mV associated with birnessite in the absence of Co. Moreover, the Tafel slope for Co/birnessite was 81 mV/dec, in comparison to a Tafel slope of greater than 200 mV/dec for birnessite. For chemical water oxidation catalysis, an 8-fold turnover number (TON) was achieved (h = 70 mmol of O 2 /mol of metal). Density functional theory (DFT) calculations predict that cobalt modification of birnessite resulted in a raising of the valence band edge and occupation of that edge by holes with enhanced mobility during catalysis. Inclusion of extra cobalt beyond the ideal 1:2 ratio was detrimental to catalysis due to disruption of the layered structure of the birnessite phase.

36 MATERIALS SCIENCE↗

Effect of Intercalated Metals on the Electrocatalytic Activity of 1T-MoS 2 for the Hydrogen Evolution Reaction

We show that intercalation of cations (Na + , Ca2 + , Ni2 + , and Co2 + ) into the interlayer region of 1T-MoS2 is an effective strategy to lower the overpotential for the hydrogen evolution reaction (HER). In acidic media the onset potential for 1T-MoS 2 with intercalated ions is lowered by ~60 mV relative to that for pristine 1T-MoS 2 (onset of ~180 mV). Density functional theory (DFT) calculations show a lowering in the Gibbs free energy for H-adsorption (ΔGH) on these intercalated structures relative to intercalant-free 1T-MoS 2 . The DFT calculations suggest that Na + intercalation results in a $ΔG_H$ close to zero. Consistent with calculation, experiments show that the intercalation of Na + ions into the interlayer region of 1T-MoS 2 results in the lowest overpotential for the HER.

08 HYDROGEN↗

Structure evolution and thermoelectric properties of carbonized polydopamine thin films

Carbonization of nature-inspired polydopamine can yield thin films with high electrical conductivity. Understanding of the structure of carbonized PDA (cPDA) is therefore highly desired. In this study, neutron diffraction, Raman spectroscopy, and other techniques indicate that cPDA samples are mainly amorphous with some short-range ordering and graphite-like structure that emerges with increasing heat treatment temperature. The electrical conductivity and the Seebeck coefficient show different trends with heat treatment temperature, while the thermal conductivity remains insensitive. Finally, the largest room-temperature ZT of 2 × 10 –4 was obtained on samples heat-treated at 800 °C, which is higher than that of reduced graphene oxide.

36 MATERIALS SCIENCE↗

Effect of Interlayer Spacing on the Activity of Layered Manganese Oxide Bilayer Catalysts for the Oxygen Evolution Reaction

We investigated the dependence of the electrocatalytic activity for the oxygen evolution reaction (OER) on the interlayer distance of five compositionally distinct layered manganese oxide nanostructures. Each individual electrocatalyst was assembled with a different alkali metal intercalated between two nanosheets (NS) of manganese oxide to form a bilayer structure. Manganese oxide NS were synthesized via the exfoliation of a layered material, birnessite. Atomic force microscopy was used to determine the heights of the bilayer catalysts. The interlayer spacing of the supported bilayers positively correlates with the size of the alkali cation: NS/Cs+/NS > NS/Rb+/NS > NS/K+/NS > NS/Na+/NS > NS/Li+/NS. The thermodynamic origins of these bilayer heights were investigated using molecular dynamics simulations. The overpotential (η) for the OER correlates with the interlayer spacing; NS/Cs+/NS has the lowest η (0.45 V), while NS/Li+/NS exhibits the highest η (0.68 V) for OER at a current density of 1 mA/cm2. Kinetic parameters (η and Tafel slope) associated with NS/Cs+/NS for the OER were superior to that of the bulk birnessite phase, highlighting the structural uniqueness of these nanoscale assemblies.

36 MATERIALS SCIENCE↗

Intercalation of Cobalt into the Interlayer of Birnessite Improves Oxygen Evolution Catalysis

Here we show that the activity of cobalt for the oxygen evolution reaction (OER) can be enhanced by confining it in the interlayer region of birnessite (layered manganese oxide). The cobalt intercalation was verified by employing state-of-the-art characterization techniques such as XRD, Raman and electron microscopy. It is demonstrated that the Co 2+ /birnessite electrocatalyst can reach 10 mA cm -2 at an overpotential of 360 mV with near unity Faradaic efficiency. This overpotential is lower than that which can be achieved by using a pure cobalt hydroxide electrocatalyst for the OER. Furthermore, the Co 2+ /birnessite catalyst shows no degradation after 1000 electrochemical cycles.

36 MATERIALS SCIENCE↗

Copper-Intercalated Birnessite as a Water Oxidation Catalyst

Here, we report a synthetic method to increase the catalytic activity of birnessite toward water oxidation by intercalating copper in the interlayer region of the layered manganese oxide. Intercalation of copper, verified by XRD, XPS, ICP, and Raman spectroscopy, was accomplished by exposing a suspension of birnessite to a Cu + -bearing precursor molecule that underwent disproportionation in solution to yield Cu 0 and Cu 2+ . Electrocatalytic studies reflected that the Cu-modified birnessite exhibited an overpotential for water oxidation of ~490 mV (at 10 mA/cm 2 ) and a Tafel slope of 126 mV/decade compared to ~700 mV (at 10 mA/cm 2 ) and 240 mV/decade, respectively, for birnessite without copper. Impedance spectroscopy results suggested that the charge transfer resistivity of the Cu-modified sample was significantly lower than Cu-free birnessite, suggesting that Cu in the interlayer increased the conductivity of birnessite leading to an enhancement of water oxidation kinetics. Density functional theory calculations show that the intercalation of Cu 0 into a layered MnO 2 model structure led to a change of the electronic properties of the material from a semiconductor to a metallic-like structure. This conclusion from computation is in general agreement with the aforementioned impedance spectroscopy results. X-ray photoelectron spectroscopy (XPS) showed that Cu 0 coexisted with Cu 2+ in the prepared Cu-modified birnessite. Control experiments using birnessite that was decorated with only Cu 2+ showed a reduction in water oxidation kinetics, further emphasizing the importance of Cu 0 for the increased activity of birnessite. The introduction of Cu 0 into the birnessite structure also increased the stability of the electrocatalyst. At a working current of 2 mA, the Cu-modified birnessite took ~3 times longer for the overpotential for water oxdiation to increase by 100 mV compared to when Cu was not present in the birnessite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methods and devices for generation of broadband pulsed radiation

Methods and apparatus for non-collinear optical parametric amplification (NOPA) are provided. Broadband phase matching is achieved with a non-collinear geometry and a divergent signal seed to provide bandwidth gain. A chirp may be introduced into the pump pulse such that the white light seed is amplified in a broad spectral region.

36 MATERIALS SCIENCE↗

Mercury Speciation in Coal-Fired Power Plant Flue Gas-Experimental Studies and Model Development

The overall goal of the project was to obtain a fundamental understanding of the catalytic reactions that are promoted by solid surfaces present in coal combustion systems and develop a mathematical model that described key phenomena responsible for the fate of mercury in coal-combustion systems. This objective was achieved by carefully combining laboratory studies under realistic process conditions using simulated flue gas with mathematical modeling efforts. Laboratory-scale studies were performed to understand the fundamental aspects of chemical reactions between flue gas constituents and solid surfaces present in the fly ash and their impact on mercury speciation. Process models were developed to account for heterogeneous reactions because of the presence of fly ash as well as the deliberate addition of particles to promote Hg oxidation and adsorption. Quantum modeling was used to obtain estimates of the kinetics of heterogeneous reactions. Based on the initial findings of this study, additional work was performed to ascertain the potential of using inexpensive inorganic sorbents to control mercury emissions from coal-fired power plants without adverse impact on the salability fly ash, which is one of the major drawbacks of current control technologies based on activated carbon.

01 COAL, LIGNITE, AND PEAT↗