Search NASA⌕ Search

Engineering topics

Borissov, E

Publications and source records attributed to Borissov, E.

Tests of a tuner for a 325 MHz SRF spoke resonator

Fermilab is developing 325 MHz SRF spoke cavities for the proposed Project X. A compact fast/slow tuner has been developed for final tuning of the resonance frequency of the cavity after cooling down to operating temperature and to compensate microphonics and Lorentz force detuning [2]. The modified tuner design and results of 4.5K tests of the first prototype are presented. The performance of lever tuners for the SSR1 spoke resonator prototype has been measured during recent CW and pulsed tests in the Fermilab SCTF. The tuner met or exceeded all design goals and has been used to successfully: (1) Bring the cold cavity to the operating frequency; (2) Compensate for dynamic Lorentz force detuning; and (3) Compensate for frequency detuning of the cavity due to changes in the He bath pressure.

43 PARTICLE ACCELERATORS↗

Design, fabrication and testing of single spoke resonators at Fermilab

The Fermilab High Intensity Neutrino Source (HINS) linac R&D program is building a pulsed 30 MeV superconducting H- linac. The linac incorporates superconducting solenoids, high power RF vector modulators and superconducting spoke-type accelerating cavities starting at 10 MeV. This will be the first application and demonstration of any of these technologies in a low-energy, high-intensity proton/H- linac. The HINS effort is relevant to a high intensity, superconducting H- linac that might serve the next generation of neutrino physics and muon storage ring/collider experiments. In this paper we present the RF design, the mechanical design, the fabrication, the chemistry and testing of the first two SSR1 (Single Spoke Resonator type-1) prototype cavities that were built. These cavities operate at 325 MHz with {beta} = 0.21. The design and testing of the input coupler and the tuning mechanism are also discussed.

43 PARTICLE ACCELERATORS↗

Transport of DESY 1.3 GHZ Cryomodule at Fermilab

In an exchange of technology agreement, Deutsches Elektron-Synchrotron (DESY) Laboratory in Hamburg Germany has provided a 1.3 GHz cryomodule 'kit' to Fermilab. The cryomodule components (qualified dressed cavities, cold mass parts, vacuum vessel, etc.) sent from Germany in pieces were assembled at Fermilab's Cryomodule Assembly Facility (CAF). The cavity string was assembled at CAF-MP9 Class 10 cleanroom and then transported to CAF-ICB cold mass assembly area via a flatbed air ride truck. Finite Element Analysis (FEA) studies were implemented to define location of instrumentation for initial cold mass transport, providing modal frequencies and shapes. Subsequently, the fully assembled cryomodule was transported to the SRF Accelerator Test Facility at New Muon Lab (NML). Internal geophones (velocity sensors) were attached during the coldmass assembly for transport (warm) and operational (cold) measurements. A description of the isolation system that maintained alignment during transport and protected fragile components is provided. Shock and vibration measurement results of each transport and modal analysis are discussed.

43 PARTICLE ACCELERATORS↗

Electromagnetic SCRF Cavity Tuner

A novel prototype of SCRF cavity tuner is being designed and tested at Fermilab. This is a superconducting C-type iron dominated magnet having a 10 mm gap, axial symmetry, and a 1 Tesla field. Inside the gap is mounted a superconducting coil capable of moving {+-} 1 mm and producing a longitudinal force up to {+-} 1.5 kN. The static force applied to the RF cavity flanges provides a long-term cavity geometry tuning to a nominal frequency. The same coil powered by fast AC current pulse delivers mechanical perturbation for fast cavity tuning. This fast mechanical perturbation could be used to compensate a dynamic RF cavity detuning caused by cavity Lorentz forces and microphonics. A special configuration of magnet system was designed and tested.

43 PARTICLE ACCELERATORS↗