Search NASA⌕ Search

Engineering topics

Borson, Eugene N.

Publications and source records attributed to Borson, Eugene N..

Measured space environmental effects to LDEF during retrieval

Data gathered by the Interim Operational Contamination Monitor (IOCM) with regard to the effect of the space environment on the STS-32 Shuttle mission and on the Long Duration Exposure Facility (LDEF) are reported. IOCM measures the deposition of molecular and particulate contamination during all flight phases. It also measures the thermophysical properties of thermal control surfaces by calorimetry, the flux of the ambient atomic oxygen environment, the incident solar flux, and the absolute ambient pressure in the payload bay. The IOCM also provides a structure and sample holders for the exposure of passive material samples to the space environment. One of the more salient results from the STS-32 flight suggests that the LDEF emitted a large number of particulates after berthing into the Shuttle. The mission atomic oxygen fluence was also calculated. Although the fluence was low by normal standards, the Kapton (trademark) passive samples exhibited the onset of erosion. Orbital debris and micrometeoroid impacts also occurred during the retrieval mission. The average perforation diameter was approximately 1.25 micrometers. The largest perforation diameter was measured at 65 micrometers.

Maag, Carl R.↗

Contamination measurements on experiment M0003

The contamination monitors on the M0003 experiment consisted of passive sample collectors to measure molecular and particulate deposition. The collectors were placed in the leading and trailing edge trays of M0003. The objective was to quantify the contaminants and determine how contamination affected the other materials in the trays. Duplicate collectors were placed inside the vacuum canisters that provided protection from the launch, ascent, deployment, and recovery environments. Analyses of the samples show small quantities of molecular deposition on both the leading and trailing edge trays. Silicone deposits are negligible. The aluminized fused silica, second surface mirrors showed small changes in solar absorptances. This is consistent with the small quantities of molecular deposits deduced from the FTIR measurements. The results of particle deposition, light scatter, and a micrometeoroid (or debris) impact are presented.

Borson, Eugene N.↗

Contamination measurements on experiment M0003

The contamination monitors on the M0003 experiment consisted of passive sample collectors to measure molecular and particular deposition. The collectors were placed in the leading and trailing edge trays of M0003. The objective was to quantify the contaminants and determine how contamination affected the other materials in the trays. Duplicate collectors were placed inside the vacuum canisters that provided protection from the launch, ascent, deployment, and recovery environments.

Borson, Eugene N.↗