Engineering topics

Bosilovich, M.

Publications and source records attributed to Bosilovich, M..

10 records

NASA NTRS2020

Mechanisms Associated with Daytime and Nighttime Heat Waves over the United States

Heat waves are extreme climate events that have the potential to cause immense stress on human health, agriculture and energy systems, so understanding the processes leading to their onset is crucial. There is no single accepted definition for heat waves, but they are generally described as a sustained amount of time where temperature exceeds a local threshold. Multiple different temperature variables are potentially relevant, as high values of daily maximum (T(max)) and minimum (T(min)) temperatures can both be detrimental to human health. Previous studies have concluded that the frequency of global heat waves has increased over recent decades, with greater increases in T(min)- than T(max)-heat waves in several regions. In this study, we focus explicitly on the different mechanisms associated with heatwaves manifest during daytime versus nighttime hours over the United States. Heat waves are examined using the National Aeronautics and Space Administration (NASA) Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2). A daytime (nighttime) heat wave is defined as average daytime (nighttime) temperature exceeding its calendar day 90th percentile for at least 3 days. Over 1980-2018, the number of heat wave days per summer has increased over much of the United States. Trends are stronger for nighttime versus daytime heat wave frequency over the Northeast, Midwest and Southwest United States. Local and remote processes linked with daytime and nighttime heat waves are identified through composite analysis of clouds, precipitation, soil moisture, and fluxes of heat and moisture. Finally, we characterize the large-scale atmospheric circulation associated with daytime and nighttime heat waves over different regions of the United States.

Thomas, N.↗

NASA NTRS2018

File Specification for M2AMIP Products: Version Number - 1.0

The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) is an atmospheric reanalysis computed with the Goddard Earth Observing (EOS) System, Version 5.12.4 (GEOS) data assimilation system (Gelaro et al., 2017). To supplement the reanalysis, the GEOS General Circulation Model (GCM) used in MERRA-2 has been used to generate a 10-member ensemble of simulations, configured following the convention of the Atmospheric Model Intercomparison Project (AMIP; Gates et al., 1992). Each ensemble member was initialized using meteorological fields from a different date in November 1979. The AMIP simulations used the sea-surface temperature (SST) and sea-ice boundary conditions that were used in MERRA-2 (Bosilovich et al., 2016). This 10-member ensemble of AMIP simulations, denoted M2AMIP, is available for download in a group of self-describing files, which are documented in this office note. All data collections are provided on the same horizontal grid as MERRA-2. This grid has 576 points in the longitudinal direction and 361 points in the latitudinal direction, corresponding to a resolution of 0.625 degrees by 0.5 degrees. Although data collections are available at this grid, all fields are computed on a cubed-sphere grid with an approximate resolution of 50 km by 50 km and are then spatially interpolated to the latitude-longitude grid. There are no changes in the vertical grids used: variables are provided on either the native vertical grid of 72 model layers, or interpolated to 42 standard pressure levels. Unlike MERRA, no data collections are available at the vertical layer edges. More details on the grid are provided in Section 4. MERRA-2 introduced observation-based precipitation forcing for the land surface parameterization and the corresponding variable PRECTOTCORR in the MERRA-2 FLX (surface turbulent fluxes and related quantities) and LFO (land-surface forcing) collections (see Section 6; Reichle et al., 2017). While this variable is still available for M2AMIP, there was no observation-based forcing, making the value identical to the model derived precipitation, PRECTOT. Similarly, without data assimilation, the values for the analysis increments, D*DTANA, in the tendency and vertically integrated file collections are zero. The M2AMIP data are available for download online through the NASA Center for Climate Simulation (NCCS) DataPortal (https://portal.nccs.nasa.gov/datashare/gmao_m2amip/). Data are arranged in subdirectories based on ensemble member, followed by year and month. Control files that are compatible with the Grid Analysis and Display System (GrADS) are available in the ctl_daily and ctl_monthly directories for the hourly, three hourly, and monthly mean data. Control files for the monthly mean diurnal cycle can be found in the ctl_diurnal subdirectory within the directory for each individual ensemble member.

M2AMIP↗

NASA NTRS2010

Analysis of Air-Sea Interactions in the NASA MERRA Product

Interactions between the ocean and atmosphere influence the global energy and water balance through the exchange of heat, moisture and momentum. These interactions occur over a wide range of space and time scales and need to be properly represented in climate and reanalysis simulations. This study focuses on the representation of the turbulent latent and sensible heat fluxes in the newly developed NASA Modern Era Retrospective-Analysis for Research and Applications (MERRA). It is shown that MERRA achieves realistic estimates of the turbulent fluxes for many space and time scales although some deficiencies are noted. Comparisons are made at high resolution temporal scales with measurements from several research vessels while long term comparisons are made with moored buoys. These results are contrasted with those from several other currently available reanalysis and satellite based products. The representation of feedbacks between the atmosphere and ocean area also examined through the use of simultaneous and lagged correlation analyses with particular focus on precipitation and sea surface temperature relationships. Together, these results demonstrate the consistency of the NASA MERRA product and its applicability for process studies across wide ranging scales of variability.

Roberts, J. Brent↗

NASA NTRS2009

Climatological Features of the Upper Troposphere and Stratosphere in the GEOS-5 "MERRA" Analyses (1979-2008)

The realism of various aspects of the upper troposphere and stratosphere in the "Modern Era Retrospective-analysis for Research and Applications" (MERRA) dataset will be examined. The MERRA reanalysis extends from 1979 until the present, using the Goddard Earth Observing System, Version 5 (GEOS-5) data assimilation system. The model and analysis have a half-degree spatial resolution with 72 layers that are constrained by observations between the Earth's surface and the stratopause. A comprehensive, time-evolving suite of meteorological observations (e.g., in-situ temperature, moisture, wind and pressure measurements and space-based infrared and microwave radiances) is assimilated. Results show realistic depiction of dominant features, such as the quasi-biennial oscillation, jet structures (including interannual variaficns) and tropopause characteristics, as validated using independent observations and system statistics. Challenges for such reanalyses include the stability to transitions in the observing system, such as the replacement of MSU/SSU by the AMSU-A data in the middle atmosphere. The paper will discuss the use of satellite radiances and examine impacts of satellite drifts and instrument changes on the analyses.

Pawson, S.↗

NASA NTRS2004

Implementation of Coupled Skin Temperature Analysis and Bias Correction in a Global Atmospheric Data Assimilation System

The NASA/NCAR Finite Volume GCM (fvGCM) with the NCAR CLM (Community Land Model) version 2.0 was integrated into the NASA/GMAO Finite Volume Data Assimilation System (fvDAS). A new method was developed for coupled skin temperature assimilation and bias correction where the analysis increment and bias correction term is passed into the CLM2 and considered a forcing term in the solution to the energy balance. For our purposes, the fvDAS CLM2 was run at 1 deg. x 1.25 deg. horizontal resolution with 55 vertical levels. We assimilate the ISCCP-DX (30 km resolution) surface temperature product. The atmospheric analysis was performed 6-hourly, while the skin temperature analysis was performed 3-hourly. The bias correction term, which was updated at the analysis times, was added to the skin temperature tendency equation at every timestep. In this presentation, we focus on the validation of the surface energy budget at the in situ reference sites for the Coordinated Enhanced Observation Period (CEOP). We will concentrate on sites that include independent skin temperature measurements and complete energy budget observations for the month of July 2001. In addition, MODIS skin temperature will be used for validation. Several assimilations were conducted and preliminary results will be presented.

Radakovich, Jon↗

NASA NTRS2004

Hurricane Forecasting with the High-resolution NASA Finite-volume General Circulation Model

A high-resolution finite-volume General Circulation Model (fvGCM), resulting from a development effort of more than ten years, is now being run operationally at the NASA Goddard Space Flight Center and Ames Research Center. The model is based on a finite-volume dynamical core with terrain-following Lagrangian control-volume discretization and performs efficiently on massive parallel architectures. The computational efficiency allows simulations at a resolution of a quarter of a degree, which is double the resolution currently adopted by most global models in operational weather centers. Such fine global resolution brings us closer to overcoming a fundamental barrier in global atmospheric modeling for both weather and climate, because tropical cyclones and even tropical convective clusters can be more realistically represented. In this work, preliminary results of the fvGCM are shown. Fifteen simulations of four Atlantic tropical cyclones in 2002 and 2004 are chosen because of strong and varied difficulties presented to numerical weather forecasting. It is shown that the fvGCM, run at the resolution of a quarter of a degree, can produce very good forecasts of these tropical systems, adequately resolving problems like erratic track, abrupt recurvature, intense extratropical transition, multiple landfall and reintensification, and interaction among vortices.

Atlas, R.↗

NASA NTRS2003

Tagging Water Sources in Atmospheric Models

Tagging of water sources in atmospheric models allows for quantitative diagnostics of how water is transported from its source region to its sink region. In this presentation, we review how this methodology is applied to global atmospheric models. We will present several applications of the methodology. In one example, the regional sources of water for the North American Monsoon system are evaluated by tagging the surface evaporation. In another example, the tagged water is used to quantify the global water cycling rate and residence time. We will also discuss the need for more research and the importance of these diagnostics in water cycle studies.

Bosilovich, M.↗

NASA NTRS2003

Data Assimilation Office (DAO) Operational Analyses and Reanalyses for Coordinated Enhanced Observing Period (CEOP)

The DAO operational assimilation system has produced and archived gridded data since 1998, and will continue through the CEOP period. However, major system upgrades and new assimilation variables will significantly affect the surface energy balance and data product. These changes will be discussed and the prospects for a CEOP reanalysis will be presented. W e will also review the data currently available and describe how to access the data.

Bosilovich, M.↗

NASA NTRS2003

Review of Diagnostics for Water Sources in General Circulation Models (GCMs)

We will describe the uses of passive tracers in GCMs to compute the geographical sources of water for precipitation. We will present a summary of recent research and how this methodology can be applied in climate and climate change studies. We will also discuss the possibility of using passive tracers in conjunction with simulations and observations of stable observations.

Bosilovich, M.↗

NASA NTRS1999

A Comparison of FIFE Observation with GEOS Assimilated Data Including a Heterogeneous LSM

Several recent studies have shown that much can be learned by comparing grid-point data from a data assimilation system with in-situ observations from field experiments. While the surface heterogeneity is acknowledged in these studies, they lack quantitative representations of the influence of heterogeneity on the near-surface meteorology and surface hydrologic and energy balance. Here, we use the Betts and Ball FIFE site-averaged data. Standard deviations of the site-average will provide an estimate of the FIFE site heterogeneity. Recently, the Mosaic Land-Surface Model (LSM) has been incorporated into the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The Mosaic LSM computes the surface energy and hydrologic balance for nine distinct surface types at each grid-point. Each surface type is proportionally weighted to determine the mean grid point properties. Hence, we can compare modeled and observed grid-point variability in addition to the mean properties. Also, assimilated data sets created with and without the LSM are compared. The results indicate the importance of including quantitative estimates of heterogeneity in the analysis of the land surface hydrology and energy balances in assimilation systems.

Bosilovich, M.↗