Search NASA⌕ Search

Engineering topics

Bowland, Christopher C.

Publications and source records attributed to Bowland, Christopher C..

At least 19 records

Acrylonitrile-butadiene-lignin thermoplastic rubber adhesive for enhanced metal-to-metal joining

With the growing requirement for lightweight structural materials in automotive, aerospace, and infrastructure applications, multi-material joints made with adhesive have attracted intense research interest. Commercial thermoset adhesives are one-time cures, and difficult to disassemble the bonded components for repair and recycling. Our prior work with a thermoplastic acrylonitrile-butadiene-lignin rubber (ABL) addresses this sustainability/recycling challenge, but the adhesive exhibits deficient joining strength compared to standard thermosets. Here, we modify the ABL matrix by loading particulate fillers to enhance its modulus and toughness. Further, the goal is to manufacture a cure-free thermoplastic adhesive system with a simple dispensing protocol and characteristic ductility combined with a high yield stress for improved shear strength of a bonded joint. Fumed silica (FS) and epoxidized glass spheres (EGS) were used as fillers in the ABL to promote the dispersion of lignin particles that tailored the functionalities and free energy components of the adhesive surface. With optimal loading of FS (5 wt%) and EGS (30 wt%) in the ABL adhesive matrix, the lap-shear strength of the bonded aluminum joint was elevated by 128%, compared to the neat ABL, reaching 21 MPa, which is 90% of the performance of a commercial epoxy-based adhesive.

36 MATERIALS SCIENCE↗

Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends

Abstract The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di‐ and tri‐block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small‐angle neutron and x‐ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7–9 nm) than the TBCP (0–4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers.

36 MATERIALS SCIENCE↗

Enhancing Composite Toughness Through Hierarchical Interphase Formation

High strength and ductility are highly desired in fiber-reinforced composites, yet achieving both simultaneously remains elusive. A hierarchical architecture is developed utilizing high aspect ratio chemically transformable thermoplastic nanofibers that form covalent bonding with the matrix to toughen the fiber-matrix interphase. The nanoscale fibers are electrospun on the micrometer-scale reinforcing carbon fiber, creating a physically intertwined, randomly oriented scaffold. Unlike conventional covalent bonding of matrix molecules with reinforcing fibers, here, the nanofiber scaffold is utilized - interacting non-covalently with core fiber but bridging covalently with polymer matrix - to create a high volume fraction of immobilized matrix or interphase around core reinforcing elements. This mechanism enables efficient fiber-matrix stress transfer and enhances composite toughness. Molecular dynamics simulation reveals enhancement of the fiber-matrix adhesion facilitated by nanofiber-aided hierarchical bonding with the matrix. The elastic modulus contours of interphase regions obtained from atomic force microscopy clearly indicate the formation of stiffer interphase. These nanoengineered composites exhibit a ≈60% and ≈100% improved in-plane shear strength and toughness, respectively. This approach opens a new avenue for manufacturing toughened high-performance composites.

36 MATERIALS SCIENCE↗

Carbon fiber-nanoparticle composites with electromechanical properties

A carbon fiber composite material comprising: (i) a carbon fiber having an outer surface, a thickness of at least 1 micron, and an aspect ratio of at least 1000; (ii) a sizing agent coated on the outer surface of the carbon fiber, wherein the sizing agent has a thickness of up to 200 nm; and (iii) nanoparticles having a size in at least one dimension of up to 100 nm embedded within the sizing agent, wherein the nanoparticles have a metal carbide, metal oxide, metal nitride, and/or metal boride composition. A method for producing the fiber composite material comprises: (a) continuously feeding and coating a continuous carbon fiber with a liquid containing a solvent, sizing agent, and nanoparticles in a continuous feed-through process to result in said sizing agent and nanoparticles coating the surface of the continuous carbon fiber; and (b) removing the solvent from the coated fiber.

Bowland, Christopher C.↗

A Sustainable Multi-Dimensional Printable Material

Polymeric materials are usually tailored for specific functionality. A single polymer exhibiting multiple simultaneous functionalities often requires intricate molecular architecture, which is difficult to manufacture at scale because of its complex synthesis routes. In this work, a facile, partly renewable composition—prepared via reactive melt processing—that induces tunable functionalities such as 3D printability, shape recovery, and self-healing while exhibiting satisfactory mechanical properties is reported. The system with a hydrogen-bonded 3D network consists of thermally reversible nano-scale agglomerates of sustainable, rigid phenolic oligomers and crystallizable flexible polymer. Local molecular mobility and temperature-dependent relaxation and recovery of the non-equilibrium networked states enable exploiting these simultaneous functionalities. Transitions involving solidification and structure stabilization at ambient temperature spanning several hours after preheating only at 70 °C directly contrast typical thermoplastic or thermoplastic elastomer behaviors. Results from this study can inform the design of future rheology modifiers and materials for soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A renewable lignin-based thermoplastic adhesive for steel joining

Adhesive bonding of metals has become increasingly relevant in recent years due to the demand for reducing weight and improving performance in structural applications such as automobiles and aerospace. We developed renewable thermoplastic adhesives from technical organosolv lignin isolated from hardwood biomass and acrylonitrile butadiene co-polymer rubber (NBR) for joining steel substrates. NBR33, NBR41 and NBR51 with acrylonitrile molar ratios of 33, 41 and 51%, respectively, were blended with lignin to form two-phase thermoplastic adhesives, and their adhesion, viscoelastic and surface properties were measured. Lignin content in the compositions were varied, ranging from 40% to 80% (w/w), to alter toughness, stiffness, and surface energy characteristics of the material. Better interaction or reactivity between the lignin and NBR phases was observed with greater nitrile content in NBR, leading to greater modulus and stiffness of the adhesive. Simultaneously, increasing the proportion of lignin reduced toughness and improved stiffness, with the highest adhesive strength of 13.1 MPa measured in a 60% lignin loading ratio with NBR51. Surface energy measurements revealed that total surface energy (sum of polar and dispersive surface energy) raised with lignin loading, suggesting that both surface energy and matrix strength play a critical role in the adhesive properties of the synthesized materials. A finite element-based cohesive zone model (CZM) was developed and implemented to study the failure strength of the adhesively bonded joint. Here, this study demonstrates the viability of lignin as a valuable building block for adhesives, not only due to its inherent chemical structure and rigidity, but also for its surface energy characteristics.

36 MATERIALS SCIENCE↗

Nitrile-Containing Renewable Polymers Based on Lignin, (CRADA) No. NFE 1807437 (CRADA Final Report)

Lignin remains one of the world’s largest sources of renewable carbon, with significant potential to positively impact our carbon footprint by replacing fossil-fuel derived materials, including engineering thermoplastics and their composites. Efforts to incorporate significant quantity of lignin into engineering thermoplastics as anything other than an inert filler have to date been largely unsuccessful, however due to limitations imposed by the degradation temperature of the lignin (220 °C) and poor compatibility between the lignin and non-polar or slightly polar polymers. Recent work at Oak Ridge National Laboratory has however shown under the right conditions excellent compatibility between lignin and nitrile containing rubber compounds such as nitrile-butadiene rubber (NBR). The present work extends these findings to the incorporation of lignin into acrylonitrile-butadiene-styrene (ABS) engineering plastics. While simple binary mixing of lignin into commercial ABS resins leads to poor interfacial adhesion and resultant low toughness and ductility, appropriate matching of the lignin and ABS components, and as appropriate compatibilizing agents, leads to polymer blends incorporating 20-35% by weight lignin with a useful range of mechanical properties for many current ABS applications. By modifying the composition, the balance of properties can be readily tailored to meet the demands of specific end-user applications.

36 MATERIALS SCIENCE↗

An Engineered Multifunctional Composite for Passive Sensing, Power Harvesting, and In Situ Damage Identification with Enhanced Mechanical Performance

A multifunctional fiber-reinforced composite with passive self-sensing, energy-harvesting, and damage detection capabilities is presented. In this work, barium titanate piezoelectric microparticles are deposited on basalt fibers by a scalable, low-cost, environmentally friendly continuous feed-through process. The resulting composite derives a superior interlaminar shear strength from the microparticle-modified fiber–matrix interfaces. The composite also demonstrates passive self-sensing capabilities that produce electrical signals proportional to various dynamic loading events. Vibration and strain-controlled experiments are performed on composite beams to quantify the sensitivity and power output as a function of input acceleration and strain. Furthermore, these composite-generated electrical signals are used to identify in situ damage initiation for structural health monitoring to inform composite damage prior to structural failure. In brief, this truly multifunctional composite simultaneously displays a sensitivity of 0.5–2.6 mV g -1 at a resolution of 0.045–0.20g (g = gravitational acceleration), energy harvesting in the range of nW cc -1 , and prediction of early damage by exhibiting 0.017–1.17 mV peaks in voltage–time history profiles while assuring ≈20% improved interlaminar shear strength.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing functionalities in carbon fiber composites by titanium dioxide nanoparticles

Carbon fiber composite's high specific strength makes it incredibly useful for structural applications. However, their low strain-to-failure can be problematic in structural applications that can potentially see high strain conditions or high fatigue cycles resulting in sudden, catastrophic failure. This is further complicated by damage manifesting within the composite thus not showing damage indicators on the surface. Therefore, monitoring the structural integrity and strain history of the composite in application by itself—while maintaining positive composite performance—is vital to ensure safe operation. In this study, a homogeneous dispersion of TiO 2 nanoparticles on carbon fiber is demonstrated to generate a piezoresistive carbon fiber polymer matrix composite with enhanced self-sensing capabilities. The nanoparticle-embedded composites also exhibited superior strength and damping potential compared to the nanoparticle-free composites. The apparent interlaminar shear strength increased by up to 15% and the damping loss factor increased by an average of 150% while the piezoresistive sensitivity increased by up to 180% with the addition of a small weight fraction of nanoparticles to the fiber surface. These results demonstrate an approach to simultaneously improve the sensing capabilities, damping behavior and mechanical strength of carbon fiber composites by simply adding nanoparticles in the fiber sizing using a commercially scalable deposition method.

36 MATERIALS SCIENCE↗

Tunable Electromechanical Liquid Crystal Elastomer Actuators

Liquid crystal elastomers (LCE) are soft materials which anisotropically shape morph in response to external stimuli. Herein, a method to produce large‐area carbon nanotube–LCE nanocomposite films with exceptional electrostrictive properties is examined. A methodology to produce telechelic precursor oligomeric composites at scale (>100 g) is presented along with the continuous casting and photocuring process. The carbon nanotubes are well‐aligned and well‐dispersed in the films, which exhibit exceptional anisotropic thermomechanical, optical, and thermal shape change characteristics. When an electric field is applied through the film thickness, the material quickly and reversibly contracts along the alignment direction. As an example, a compliant carbon nanotube–LCE film contracts >4% against a 140 kPa load, roughly comparable to the blocking force of many natural muscular tissues. Furthermore, it is demonstrated that this tunable contraction is dependent upon the electric field strength, and that the contraction mimics the form function of the input electric field (e.g., a sine wave). These compliant actuators are excellent candidates for incorporation into soft and/or biological systems.

36 MATERIALS SCIENCE↗

Butanol-Based Organosolv Lignin and Reactive Modification of Poly(ethylene-glycidyl methacrylate)

Biomass processing industries and modern society are both interested in environmentally friendly plant-based polymers, such as lignin, to replace petrochemical derivatives. In this study, an n-butanol-based solvent system that can be produced through fermentation of cellulosic biomass, was used to fractionate hybrid poplar and isolate high purity lignin. The resulting unique glassy lignin fraction exhibited good melt-flow characteristics but poor mechanical behavior. Therefore, to produce a reusable and tough thermoplastic material, the lignin was reactively blended with glycidyl methacrylate modified polyethylene plastic using a high shear melt-mixing technique at 170 °C. Mechanical and rheological analyses revealed that the reactively processed blends with 30 wt % lignin have good compatibility between both polymers. Scanning electron microscopy, dynamic mechanical thermal analysis, and infrared spectroscopy data indicated improved interaction between lignin and the functional polyethylene matrix. The blends exhibited a thermal relaxation in the temperature range of 10 to 20 °C, because of the branched glycidyl methacrylate moiety. Finally, the optimal composition, consisting of 30% lignin, exhibited ~10 MPa tensile strength with 50% strain to failure; such a lignin-modified polymer may find use as packaging, as textile coatings, and in various horticultural applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fundamental understanding of whole biomass dissolution in ionic liquid for regeneration of fiber by solution-spinning

Materials made from renewable resources are interesting and attractive substitutes for petroleum-based materials. Recently, regeneration of cellulose fibers using ionic liquids (ILs) as green solvents has been a topic of interest to both industrial and academic sectors. However, extraction of cellulose from lignocellulosic biomass requires numerous energy intensive processing steps. Additionally, the deconstruction and removal of lignin and hemicellulose components from lignocellulosic biomass usually involve corrosive pretreatment and the solvation of specific biomass components. Instead, utilization of the whole biomass—particularly woody residues—to manufacture high-performance materials offers an attractive value-proposition. In this study, we demonstrated fiber regeneration of whole hybrid poplar (HP) biomass by a sustainable method. We developed an environmentally friendly approach by partially auto-hydrolyzing the biomass with water before its dissolution in 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) ionic liquid, for large-scale, roll-to-roll production of fibers by solution spinning. We discuss, for the first time, a fundamental understanding of the inter- and intramolecular interactions in HP biomass–IL solutions, as well as their corresponding spinnability, structural reformation, and mechanical performance of the regenerated fibers. Particularly, the molecular alignment, recrystallization, and crystallinity of the spun fibers were correlated to the chain entanglement, molecular relaxation, and rheological properties of the HP biomass–IL solutions. A window of entangled concentration (4–6.5 wt%) of biomass in the IL was determined to be favorable for fiber spinning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Ionomeric Renewable Thermoplastic from Lignin-Reinforced Rubber

An ionomeric, leathery thermoplastic with high mechanical strength is prepared by a new thermal processing method from a soft, melt-processable rubber. Compositions made by incorporation of equal-mass lignin, a renewable oligomeric feedstock, in an acrylonitrile-butadiene rubber often yield weak rubbers with large lignin domains (1–2 µm). The addition of zinc chloride (ZnCl2) in such a composition based on sinapyl alcohol-rich lignin during a solvent-free synthesis induces a strong interfacial crosslinking between lignin and rubber phases. This compositional modification results in finely interspersed lignin domains (<100 nm) that essentially reinforce the rubbery matrix with a 10–22 °C rise in the glassy-to-rubbery transition temperature. The ion-modified polymer blends also show improved materials properties, like a 100% increase in ultimate tensile strength and an order of magnitude rise in Young's modulus. Coarse-grained molecular dynamics (MD) simulations verify the morphology and dynamics of the ionomeric material. The computed result also confirms that the ionomers have glassy characteristics.

36 MATERIALS SCIENCE↗

A path for lignin valorization via additive manufacturing of high-performance sustainable composites with enhanced 3D printability

Here, we report the manufacture of printable, sustainable polymer systems to address global challenges associated with high-volume utilization of lignin, an industrial waste from biomass feedstock. By analyzing a common three-dimensional printing process—fused-deposition modeling—and correlating the printing-process features to properties of materials such as acrylonitrile-butadiene-styrene (ABS) and nylon, we devised a first-of-its-kind, high-performance class of printable renewable composites containing 40 to 60 weight % (wt %) lignin. An ABS analog made by integrating lignin into nitrile-butadiene rubber needs the presence of a styrenic polymer to avoid filament buckling during printing. However, lignin-modified nylon composites containing 40 to 60 wt % sinapyl alcohol–rich, melt-stable lignin exhibit enhanced stiffness and tensile strength at room temperature, while—unexpectedly—demonstrating a reduced viscosity in the melt. Further, incorporation of 4 to 16 wt % discontinuous carbon fibers enhances mechanical stiffness and printing speed, as the thermal conductivity of the carbon fibers facilitates heat transfer and thinning of the melt. We found that the presence of lignin and carbon fibers retards nylon crystallization, leading to low-melting imperfect crystals that allow good printability at lower temperatures without lignin degradation.

36 MATERIALS SCIENCE↗