Search NASA⌕ Search

Engineering topics

Brédas, Jean-Luc

Publications and source records attributed to Brédas, Jean-Luc.

Dimensionality-Dependent Electronic Properties of the Highly Conducting n-Type Polymer, Poly(benzodifurandione)

Poly(benzodifurandione) (n-PBDF) has garnered significant interest as it displays the highest reported n-type electrical conductivity among π-conjugated polymers. Earlier theoretical studies of n-PBDF could not rationalize this high conductivity. Here, we explore the geometric and electronic properties of two-dimensional (2D) and three-dimensional (3D) n-PBDF networks using first-principles calculations and tight-binding models. In 2D networks, a metallic electronic configuration occurs when considering a coplanar geometry with BDF moieties bounded to protons on the same side; however, backbone torsions disrupt the metallic behavior. In contrast, all 3D architectures consistently lead to a metallic nature, which is not impacted by variations in proton positions and stacking patterns. Tight-binding models allowed us to evaluate the respective strengths of intra- and interchain electronic couplings in n-PBDF. Altogether, our investigations provide a comprehensive picture into the electronic properties of n-PBDF and shed light on how they are affected by system dimensionality, proton positions, and stacking patterns.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT–TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H–C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π–π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm −1 . More importantly, thermally annealed TPT–TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10 −2 cm 2 V −1 s −1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Chemistry↗

Frontier Orbital Degeneracy: A New Concept for Tailoring the Magnetic State in Organic Semiconductor Adsorbates

Kondo resonances in molecular adsorbates are an important building block for applications in the field of molecular spintronics. Here, we introduce the novel concept of using frontier orbital degeneracy for tailoring the magnetic state, which is demonstrated for the case of the organic semiconductor 1,4,5,8,9,11-Hexaazatriphenylenehexacarbonitrile (HATCN, C 18 N 12 ) on Ag(111). Low-temperature scanning tunneling microscopy/spectroscopy (LT-STM/STS) measurements reveal the existence of two types of adsorbed HATCN molecules with distinctly different appearances and magnetic states, as evident from the presence or absence of an Abrikosov-Suhl-Kondo resonance. Our DFT results show that HATCN on Ag(111) supports two almost isoenergetic states, both with one excess electron transferred from the Ag surface, but with magnetic moments of either 0 or 0.65 μ B . Therefore, even though all molecules undergo charge transfer of one electron from the Ag substrate, they exist in two different molecular magnetic states that resemble a free doublet or an entangled spin state. We explain how the origin of this behavior lies in the twofold degeneracy of the lowest unoccupied molecular orbitals of gas phase HATCN, lifted upon adsorption and charge-transfer from Ag(111). In conclusion, our combined STM and DFT study introduces a new pathway to tailoring the magnetic state of molecular adsorbates on surfaces, with significant potential for spintronics and quantum information science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electronic and Magnetic Properties of Oligomers and Chains of Poly(benzodifurandione) (PBDF), A Highly Conducting n-Type Polymer

The seminal development of highly electrically conducting polyacetylene via oxidative or reductive treatment (“doping”) has continuously inspired the search for other conducting π-conjugated polymers. Recently, poly(benzodifurandione), PBDF, was reported to have unexpected solubility given the absence of side chains and to exhibit an unprecedented, high electrical conductivity upon reduction (“n-doping”), with protons acting as counterions. Here, we theoretically investigate the electronic and magnetic properties of PBDF by taking long oligomers and one-dimensional (1D) periodic chains as model systems. With the oligomer models, we characterize the formation of polarons and bipolarons in n-doped PBDF. Our results indicate that singlet bipolarons tend to be the energetically most favorable species when protons bind to two closely located carbonyl groups in nearest-neighbor benzodifurandione moieties. The calculations on the 1D periodic chain models show that the positions of the protonated carbonyl groups determine the metallic, semiconducting, or insulating nature of a PBDF chain. When the protonated carbonyl groups are all situated on the same side of a PBDF chain, a stable helical chain configuration is found that exhibits ferromagnetic behavior. Our findings elucidate the mechanism of polaron and bipolaron formation in long oligomers of n-doped PBDF and highlight the fascinating electronic and magnetic properties of periodic 1D chains. Furthermore, these studies also provide a stepping stone for investigations of PBDF thin films, for which two- and three-dimensional structures must be considered.

36 MATERIALS SCIENCE↗

Spectral Signatures of a Negative Polaron in a Doped Polymer Semiconductor: Energy Levels and Hubbard U Interactions

The modern picture of negative charge carriers on conjugated polymers invokes the formation of a singly occupied (spin-up/spin-down) level within the polymer gap and a corresponding unoccupied level above the polymer conduction band edge. The energy splitting between these sublevels is related to on-site Coulomb interactions between electrons, commonly termed Hubbard U. However, spectral evidence for both sublevels and experimental access to the U value is still missing. Here, in this work, we provide evidence by n-doping the polymer P(NDI 2 OD-T 2 ) with [RhCp*Cp] 2 , [N-DMBI] 2 , and cesium. Changes in the electronic structure after doping are studied with ultraviolet photoelectron and low-energy inverse photoemission spectroscopies (UPS, LEIPES). UPS data show an additional density of states (DOS) in the former empty polymer gap while LEIPES data show an additional DOS above the conduction band edge. These DOS are assigned to the singly occupied and unoccupied sublevels, allowing determination of a U value of ~1 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring On-Surface Molecular Reactions and Assembly through Hydrogen-Modified Synthesis: From Triarylamine Monomer to 2D Covalent Organic Framework

Relative to conventional wet-chemical synthesis techniques, on-surface synthesis of organic networks in ultrahigh vacuum has few control parameters. The molecular deposition rate and substrate temperature are typically the only synthesis variables to be adjusted dynamically. Here we demonstrate that reducing conditions in the vacuum environment can be created and controlled without dedicated sources-relying only on backfilled hydrogen gas and ion gauge filaments-and can dramatically influence the Ullmann-like on-surface reaction used for synthesizing two-dimensional covalent organic frameworks (2D COFs). Using tribromo dimethylmethylene-bridged triphenylamine ((Br 3 )DTPA) as monomer precursors, we find that atomic hydrogen (H*) blocks aryl-aryl bond formation to such an extent that we suspect this reaction may be a factor in limiting the ultimate size of 2D COFs created through on-surface synthesis. Conversely, we show that control of the relative monomer and hydrogen fluxes can be used to produce large self-assembled islands of monomers, dimers, or macrocycle hexamers, which are of interest in their own right. On-surface synthesis of oligomers, from a single precursor, circumvents potential challenges with their protracted wet-chemical synthesis and with multiple deposition sources. Using scanning tunneling microscopy and spectroscopy (STM/STS), we show that changes in the electronic states through this oligomer sequence provide an insightful view of the 2D COF (synthesized in the absence of atomic hydrogen) as the end point in an evolution of electronic structures from the monomer.

36 MATERIALS SCIENCE↗

Electronic Spin Qubit Candidates Arrayed within Layered Two-Dimensional Polymers

Molecular electronic spin qubits are promising candidates for quantum information science applications because they can be reliably produced and engineered via chemical design. Embedding electronic spin qubits within two-dimensional polymers (2DPs) offers the possibility to systematically engineer inter-qubit interactions while maintaining long coherence times, both of which are prerequisites to their technological utility. Here, we introduce electronic spin qubits into a diamagnetic 2DP by n-doping naphthalene diimide subunits with varying amounts of CoCp 2 and analyze their spin densities by quantitative electronic paramagnetic resonance spectroscopy. Low spin densities (e.g., 6.0 × 10 12 spins mm –3 ) enable lengthy spin–lattice (T 1 ) and spin–spin relaxation (T 2 ) times across a range of temperatures, ranging from T 1 values of 164 ms at 10 K to 30.2 μs at 296 K and T 2 values of 2.36 μs at 10 K to 0.49 μs at 296 K for the lowest spin density sample examined. Higher spin densities and temperatures were both found to diminish T 1 times, which we attribute to detrimental cross-relaxation from spin–spin dipolar interactions and spin–phonon coupling, respectively. Higher spin densities decreased T 2 times and modulated the T 2 temperature dependence. Here, we attribute these differences to the competition between hyperfine and dipolar interactions for electron spin decoherence, with the dominant interaction transitioning from the former to the latter as spin density and temperature increase. Overall, this investigation demonstrates that dispersing electronic spin qubits within layered 2DPs enables chemical control of their inter-qubit interactions and spin decoherence times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗