Search NASA⌕ Search

Engineering topics

Bradby, J. E.

Publications and source records attributed to Bradby, J. E..

Melting diamond in the diamond cell by laser-flash heating

The phase behavior of carbon at high pressure and the search for carbon structures denser than diamond has been explored for decades showing large discrepancies, with many fundamental questions remaining unresolved. Here we show evidence of melting above the graphite-diamond-liquid (GDL) triple point (~13 GPa, 4000 K) up to 50 GPa on samples recovered from single flash-heating events using spectroscopic and electron microscopic methods. The results show that for all pressures, diamond melts below the triple point temperature contradicting previous studies, most of which predict a positive slope of the melting curve.

36 MATERIALS SCIENCE↗

Formation of an r8-Dominant Si Material

The rhombohedral phase of Si (r8-Si), a promising semiconducting material, is formed by indentation together with the body-centered cubic phase (bc8-Si). Using a novel sample preparation method, x-ray diffraction is used to determine the relative volume of these phases in indented Si and allow observation of a distorted unit cell along the direction of indentation loading. Theoretical calculations together with these observations suggest the indent contains an intrinsic compression of ~4 GPa that stabilizes the r8 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ analysis of the structural transformation of glassy carbon under compression at room temperature

Room temperature compression of graphitic materials leads to interesting superhard sp 3 rich phases which are sometimes transparent. In the case of graphite itself, the sp 3 rich phase is proposed to be monoclinic M-carbon; however, for disordered materials such as glassy carbon the nature of the transformation is unknown. We compress glassy carbon at room temperature in a diamond anvil cell, examine the structure in situ using x-ray diffraction, and interpret the findings with molecular dynamics modeling. Experiment and modeling both predict a two-stage transformation. First, the isotropic glassy carbon undergoes a reversible transformation to an oriented compressed graphitic structure. This is followed by a phase transformation at ~35 GPa to an unstable, disordered sp 3 rich structure that reverts on decompression to an oriented graphitic structure. Analysis of the simulated sp 3 rich material formed at high pressure reveals a noncrystalline structure with two different sp 3 bond lengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The high pressure phase transformation behavior of silicon nanowires

Si nanowires of 80–150 nm and 200–250 nm diameter are pressurized up to 22 GPa using a diamond anvil cell. Raman and x-ray diffraction data were collected during both compression and decompression. Electron microscopy images reveal that the nanowires retain a nanowire-like morphology (after high pressure treatment). On compression, dc-Si was observed to persist at pressures up to 19 GPa compared to ~11 GPa for bulk-Si. On decompression, the metallic β-Sn phase was found to be more stable for Si nanowires compared with bulk-Si when lowering the pressure and was observed as low as 6 GPa. For the smallest nanowires studied (80–150 nm), predominately a-Si was obtained on decompression, whereas for larger nanowires (200–250 nm), clear evidence for the r8/bc8-Si phase was obtained. We suggest that the small volume of the individual Si nanowires compared with bulk-Si inhibits the nucleation of the r8-Si phase on decompression. This study shows that there is a size dependence in the high pressure behavior of Si nanowires during both compression and decompression.

36 MATERIALS SCIENCE↗

The influence of hold time on the onset of plastic deformation in silicon

The transformation of diamond-cubic silicon to the metallic β-Sn phase is known to be “sluggish,” even when the critical pressure (∼11 GPa) for the transformation is reached. In this letter, we use nanoindentation to apply pressures to just above the critical threshold. In this regime, the sample displays purely elastic behavior at zero hold time. As the hold time at maximum load is increased up to 180 s, the percentage of indents that plastically deform also increase. Interestingly, the indents deform via one of two distinct processes: either via a phase transformation to a mixed bc8/r8-Si end phase, or by initiation of crystalline defects. Raman spectroscopy and cross-sectional transmission electron microscopy are used to show that the two deformation mechanisms are mutually exclusive under the indentation conditions presented here, and elastic modelling was utilized to propose a model for this mutually exclusive behavior. Hence, this behavior enhances the potential for application of the exotic bc8/r8-Si end phase.

36 MATERIALS SCIENCE↗

Experimental evidence of new tetragonal polymorphs of silicon formed through ultrafast laser-induced confined microexplosion

Ordinary materials can transform into novel phases with new crystal structures at extraordinary high pressure and temperature applied under both equilibrium and non-equilibrium conditions 1-6. The recently developed method of ultra-short laser-induced confined microexplosions 7-9 extends the range of possible new phases by initiating a highly non-equilibrium plasma state deep inside a bulk material 7-12. Ultra-high quenching rates can help to overcome kinetic barriers to the formation of new metastable phases, while the surrounding pristine crystal confines the affected material and preserves it for further study 10-12. Here we demonstrate that ultra-rapid pressure release from a completely disordered plasma state in silicon produces several new metastable end phases quenched to ambient conditions. Their structure is determined from comparison to an ab initio random structure search which revealed six new energetically competitive potential phases, four tetragonal and two monoclinic ones. We show the presence of bt8 and st12, which have been predicted theoretically previously 13-15, but have not been observed in nature or in laboratory experiments. Additionally, the presence of the as yet unidentified silicon phase, Si-VIII and two of our other predicted tetragonal phases are highly likely within laser-affected zones. These findings pave the way for new materials with novel and exotic properties.

36 MATERIALS SCIENCE↗

Phase transformation as the single-mode mechanical deformation of silicon

The mixture of the metastable body-centered cubic (bc8) and rhombohedral (r8) phases of silicon that is formed via nanoindentation of diamond cubic (dc) silicon exhibits properties that are of scientifc and technological interest. This letter demonstrates that large regions of this mixed phase can be formed in crystalline Si via nanoindentation without signifcant damage to the surrounding crystal. Cross-sectional transmission electron microscopy is used to show that volumes 6 μm wide and up to 650 nm deep can be generated in this way using a spherical tip of ~21.5 μm diameter. The phase transformed region is characterised using both Raman microspectroscopy and transmission electron microscopy. It is found that uniform loading using large spherical indenters can favor phase transformation as the sole deformation mechanism as long as the maximum load is below a critical level. We suggest that the sluggish nature of the transformation from the dc-Si phase to the metallic (b-Sn) phase normally results in competing deformation mechanisms such as slip and cracking but these can be suppressed by controlled loading conditions.

36 MATERIALS SCIENCE↗

Crystal structure of laser-induced subsurface modifications in Si

Laser-induced subsurface modification of dielectric materials is a well-known technology. Applications include the production of optical components and selective etching. In addition to dielectric materials, the subsurface modification technology can be applied to silicon, by employing near to mid-infrared radiation. An application of subsurface modifications in silicon is laser-induced subsurface separation, which is a method to separate wafers into individual dies. Other applications for which proofs of concept exist are the formation of waveguides and resistivity tuning. However, limited knowledge is available about the crystal structure of subsurface modifications in silicon. In this paper, we investigate the geometry and crystal structure of laser-induced subsurface modifications in monocrystalline silicon wafers. Finally, in addition to the generation of lattice defects, we found that transformations to amorphous silicon and Si-iii/Si-xii occur as a result of the laser irradiation.

36 MATERIALS SCIENCE↗

Temperature-dependent mechanical deformation of silicon at the nanoscale: Phase transformation versus defect propagation

This study uses high-temperature nanoindentation coupled with in situ electrical measurements to investigate the temperature dependence (25–200 °C) of the phase transformation behavior of diamond cubic (dc) silicon at the nanoscale. Along with in situ indentation and electrical data, ex situ characterizations, such as Raman and cross-sectional transmission electron microscopy, have been used to reveal the indentation-induced deformation mechanisms. We find that phase transformation and defect propagation within the crystal lattice are not mutually exclusive deformation processes at elevated temperature. Both can occur at temperatures up to 150 °C but to different extents, depending on the temperature and loading conditions. For nanoindentation, we observe that phase transformation is dominant below 100 °C but that deformation by twinning along (111) planes dominates at 150 °C and 200 °C. This work, therefore, provides clear insight into the temperature dependent deformation mechanisms in dc-Si at the nanoscale and helps to clarify previous inconsistencies in the literature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature dependent deformation mechanisms in pure amorphous silicon

High temperature nanoindentation has been performed on pure ion-implanted amorphous silicon (unrelaxed a-Si) and structurally relaxed a-Si to investigate the temperature dependence of mechanical deformation, including pressure-induced phase transformations. Along with the indentation load-depth curves, ex situ measurements such as Raman micro-spectroscopy and cross-sectional transmission electron microscopy analysis on the residual indents reveal the mode of deformation under the indenter. While unrelaxed a-Si deforms entirely via plastic flow up to 200 °C, a clear transition in the mode of deformation is observed in relaxed a-Si with increasing temperature. Up to 100 °C, pressure-induced phase transformation and the observation of either crystalline (r8/bc8) end phases or pressure-induced a-Si occurs in relaxed a-Si. However, with further increase of temperature, plastic flow rather than phase transformation is the dominant mode of deformation. It is believed that the elevated temperature and pressure together induce bond softening and “defect” formation in structurally relaxed a-Si, leading to the inhibition of phase transformation due to pressure-releasing plastic flow under the indenter.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗