Engineering topics

Bradley, O. H., Jr.

Publications and source records attributed to Bradley, O. H., Jr..

4 records

NASA NTRS1988

Development of a rotary fluid transfer coupling and support mechanism for space station

A design was developed for a rotary fluid coupling to transfer coolant fluids (primarily anhydrous ammonia) across rotating joints of the space station. Development testing using three conceptual designs yielded data which were used to establish the design of a multipass fluid coupling capable of handling three fluid circuits. In addition, a mechanism to support the fluid coupling and allow an astronaut to replace the coupling quickly and easily was designed.

Bradley, O. H., Jr.↗

NASA NTRS1985

Thermal design of the ACCESS erectable space truss

Thermal design requirements for the erectable truss beam to be assembled in-orbit during extra-vehicular activity as part of the ACCESS experiment to take place in 1985-1986 are formulated and assessed. The coatings, insulation, and materials chosen for the structural elements of the beam are detailed. A combined radiation and conduction thermal model reveals that worst-case thermal gradients within the ACCESS structure over plane-to-sun angles of 0 to 80 deg will be less than 29 F, which is within the allowable limit of 50 F. The individual strut insulation concept using aluminized Kapton is shown to offer significant advantages over white paint or a chromic acid anodized surface for controlling the thermal response.

Bradley, O. H., Jr.↗

NASA NTRS1984

STEP mechanical systems

The key elements in the STEP system are depicted including the Spacelab pallet, a modular interface structure, and pallet mounted electronics. Several concepts for potential experiments are illustrated.

Bradley, O. H., Jr.↗

NASA NTRS1981

Development of a window protection assembly for a shuttle experiment

A window environmental protection assembly developed for the shuttle infrared leeside temperature experiment is described. The assembly consists of a carbon phenolic composite window mount which contains two silicon windows, a fibrous environmental protection plug to protect the windows during launch operations and ascent heating, a release mechanism used to jettison the plug just prior to atmospheric entry, and two pin puller mechanisms which retain the plug. The plug is released from the window mount assemblies using pneumatic pin pullers and separation springs in the release mechanism. The assembly was designed and tested to withstand the severe mechanical and thermal environments which could be experienced at the top of the shuttle orbiter vertical stabilizer during the ascent, on-orbit, and entry periods of the shuttle trajectory.

Bradley, O. H., Jr.↗