Search NASA⌕ Search

Engineering topics

Braslow, A. L.

Publications and source records attributed to Braslow, A. L..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

History of Suction-Type Laminar-Flow Control with Emphasis on Flight Resrearch: Monographs in Aerospace History Number 13

The paper contains the following sections: Foreword; Preface; Laminar-Flow Control Concepts and Scope of Monograph; Early Research on Suction-Type Laminar-Flow Control (Research from the 1930s through the War Years; Research from after World War II to the Mid-1960s); Post X-21 Research on Suction-Type Laminar-Flow Control; Status of Laminar-Flow Control Technology in the Mid-1990s; Glossary; Document 1-Aeronautics Panel, AACB, R&D Review, Report of the Subpanel on Aeronautic Energy Conservation/Fuels; Document 2-Report of Review Group on X-21A Laminar Flow Control Program; Document 3-Langley Research Center Announcement, Establishment of Laminar Flow Control Working Group; Document 4-Intercenter Agreement for Laminar Flow Control Leading Edge Glove Flights, LaRC and DFRC; Document 5-Flight Report NLF-144, of AFTIF-111 Aircraft with the TACT Wing Modified by a Natural Laminar Flow Glove; Document 6-Flight Record, F-16XL Supersonic Laminar Flow Control Aircraft; Index; and About the Author.

Braslow, A. L.↗
NASA NTRS1992

Laminar flow flight experiments - A review

A development history is presented for flight tests of flow-laminarizing technologies, from the wooden-structure wing glove used with the B-18 of about 1940 to the X-21 of 1963-1965 and the wing incidence-varying tests conducted with gloved-wing F-111 and F-14 variable-sweep aircraft in more recent years. Natural laminar flight control testing has also been conducted with a B 757 airliner. Over the years, increasing attention has been given to the treatment of the leading edge of laminar flow wings in order to prevent flow instabilities that precipitate flow transition to turbulence farther aft.

Wagner, R. D.↗
NASA NTRS1990

Applied aspects of laminar-flow technology

An account is given of the development status and performance levels achieved with natural laminar flow (NLF), extended wing chord laminar flow control (LFC), and hybrid laminar flow control (HLFC) concepts combining NLF and partial-chord LFC in the leading-edge region. Attention is given to NLF wing structure construction methods capable of achieving the requisite surface-irregularity tolerances, LFC through wing surface suction slots or perforated skins, and the deleterious effects of insects, ice crystals, and noise disturbance inputs on the ability of NLF, LFC, and HLFC wings to maintain effective laminar flow operation.

Braslow, A. L.↗
NASA NTRS1989

Laminar-flow flight experiments

The flight testing conducted over the past 10 years in the NASA laminar-flow control (LFC) will be reviewed. The LFC program was directed towards the most challenging technology application, the high supersonic speed transport. To place these recent experiences in perspective, earlier important flight tests will first be reviewed to recall the lessons learned at that time.

Wagner, Richard D.↗
NASA NTRS1985

Design considerations for application of laminar flow control systems to transport aircraft

The current status of the laminar-flow control LFC technology is summarized. Factors that have previously inhibited the application of LFC are first reviewed. Involved are the effects of atmospheric ice crystals, surface irregularities, acoustical environment, and off-design operating conditions. Aircraft design trends that are different from turbulent aircraft are discussed as are various design requirements unique to the LFC systems. Current design approaches for the principal LFC systems are reviewed. These include the system for protection of the leading-edge region from surface contamination and icing and the system for removal of a portion of the boundary-layer air. The latter includes consideration of both multiple spanwise suction slots and distributed perforations and required differences between the wing-box and leading-edge box regions.

Braslow, A. L.↗
NASA NTRS1983

Circulation control propellers for general aviation, including a BASIC computer program

The feasibility of replacing variable pitch propeller mechanisms with circulation control (Coanada effect) propellers on general aviation airplanes was examined. The study used a specially developed computer program written in BASIC which could compare the aerodynamic performance of circulation control propellers with conventional propellers. The comparison of aerodynamic performance for circulation control, fixed pitch and variable pitch propellers is based upon the requirements for a 1600 kg (3600 lb) single engine general aviation aircraft. A circulation control propeller using a supercritical airfoil was shown feasible over a representative range of design conditions. At a design condition for high speed cruise, all three types of propellers showed approximately the same performance. At low speed, the performance of the circulation control propeller exceeded the performance for a fixed pitch propeller, but did not match the performance available from a variable pitch propeller. It appears feasible to consider circulation control propellers for single engine aircraft or multiengine aircraft which have their propellers on a common axis (tractor pusher). The economics of the replacement requires a study for each specific airplane application.

Taback, I.↗
NASA NTRS1981

Aerodynamic evaluation of circulation control propellers

The aerodynamic compatibility of fixed-pitch circulation-control (CC) propellers with the performance characteristics and requirements of a 1600 kg (3600 lb) single-engine variable-pitch propeller general aviation airplane was evaluated. The initial results with elliptical-shaped CC airfoils indicated that the feasibility of application to fixed-pitch propellers was doubtful for the class of airplane investigated (cruise speed of about 300 km/hr) and improbable for higher-speed airplanes. Supplemental data for a cambered circulation-control supercritical airfoil, which became available after completion of the initial evaluation, were subsequently analyzed and are included in the Addendum to this report. With the much superior aerodynamic characteristics of the CC-supercritical airfoil, elimination of variable pitch appears aerodynamically feasible for low-speed airplanes through the use of a moderate amount of upper-surface blowing near the trailing edge during cruise. Overall feasibility depends upon results of structural and systems-type analyses.

Braslow, A. L.↗
NASA NTRS1978

A perspective of laminar-flow control

A historical review of the development of laminar flow control technology is presented with reference to active laminar boundary-layer control through suction, the use of multiple suction slots, wind-tunnel tests, continuous suction, and spanwise contamination. The ACEE laminar flow control program is outlined noting the development of three-dimensional boundary-layer codes, cruise-noise prediction techniques, airfoil development, and leading-edge region cleaning. Attention is given to glove flight tests and the fabrication and testing of wing box designs.

Braslow, A. L.↗
NASA NTRS1973

Aeronautical fuel conservation possibilities for advanced subsonic transports

The anticipated growth of air transportation is in danger of being constrained by increased prices and insecure sources of petroleum-based fuel. Fuel-conservation possibilities attainable through the application of advances in aeronautical technology to aircraft design are identified with the intent of stimulating NASA R and T and systems-study activities in the various disciplinary areas. The material includes drag reduction; weight reduction; increased efficiency of main and auxiliary power systems; unconventional air transport of cargo; and operational changes.

Braslow, A. L.↗
NASA NTRS1972

Advanced subsonic transport technology.

NASA has undertaken an Advanced Transport Technology Program directed toward defining technology advances that would contribute to a superior subsonic long-haul transport aircraft for conventional takeoff and landing. The aircraft, engine industries, and airlines play substantial parts in the program. Major objectives of the studies include the making of conceptual layouts of new subsonic transport aircraft incorporating projected advances and the identification of the potential benefits and costs of the technology advances. Another goal is the definition of the ground and flight research activities required to bring the advanced technologies to a state of readiness for industry use by the late 1970s.

Braslow, A. L.↗