Search NASA⌕ Search

Engineering topics

Breidenthal, Julian C.

Publications and source records attributed to Breidenthal, Julian C..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Deep Space Relay Terminals for Mars Superior Conjunction

The Sun periodically blocks direct communication between the Earth and Mars, creating a need for a relay when missions have a critical need for communication during these times. We examined several approaches based on optical or radio-frequency relays placed in deep space between the Earth and Mars, exploring multiple possible placements of relays, including periodic orbits in the Sun-Earth and Sun-Mars rotating frames, and eccentric, sun-centered orbits. L4 and L5 long-period orbits in the sun-Mars system provide suitable communications geometry continuously for very long durations. In such an orbit, a deep space relay terminal with two 50 cm optical telescopes and two 75 cm Ka-band dish antennas, along with associated receivers and transmitters, would be capable of supporting Mars superior conjunctions with an optical data rate of 28 to 44 Mbps for return links, and 30-36 Mbps in the forward direction. The relay should use efficient, low-noise optical detectors, such as appropriately cooled Avalanche Photo Diode or Superconducting Nanowire Single Photon Detectors, to achieve these data rates. The single relay discussed in this study might have additional value beyond communications, providing a synergistic platform for solar observation, solar wind observation, gravitational studies, the search for near-earth asteroids, or a navigational beacon.

Lau, Chi-Wung↗
NASA NTRS2018

Space and Earth Terminal Sizing for Future Mars Missions

NASA is investigating potential communications architectures to support future missions to Mars, with a time horizon out to about 2040. We examined a wide range of Earth-surface, Earth-orbiting, Mars-orbiting, and Mars-landed assets with both radio frequency and optical capabilities, and estimated the size, weight, power, and comparative cost of spacecraft telecommunications subsystems along with their comparative costs. Link attributes needed to achieve a fixed set of desired data rate capabilities were derived, assuming a planned set of Earth stations. For the trunk link from Mars to Earth, the required return data rates considered were 50, 75, 125, and 250 Mbps, and the required forward data rates considered were 30 and 50 Mbps. For proximity links, the required forward and return data rates (symmetric) ranged from 0.36 Mbps to 100 Mbps. The communication channels considered were UHF (75 cm wavelength) for proximity links only, and X-band (3.6 cm wavelength), Kaband (0.81 cm wavelength), and optical (808, 976, 1064, and 1550 nm wavelength) for both proximity and trunk links. Optical solutions provided substantial size and spectrum constraint advantages, but mixed advantages and disadvantages on mass and power. System cost was lower if the RF capability of space assets was increased to permit the number of arrayed RF Earth stations to be limited to two.

MacNeal, Bruce↗
NASA NTRS2011

The Necessity of Functional Analysis for Space Exploration Programs

As NASA moves toward expanded commercial spaceflight within its human exploration capability, there is increased emphasis on how to allocate responsibilities between government and commercial organizations to achieve coordinated program objectives. The practice of program-level functional analysis offers an opportunity for improved understanding of collaborative functions among heterogeneous partners. Functional analysis is contrasted with the physical analysis more commonly done at the program level, and is shown to provide theoretical performance, risk, and safety advantages beneficial to a government-commercial partnership. Performance advantages include faster convergence to acceptable system solutions; discovery of superior solutions with higher commonality, greater simplicity and greater parallelism by substituting functional for physical redundancy to achieve robustness and safety goals; and greater organizational cohesion around program objectives. Risk advantages include avoidance of rework by revelation of some kinds of architectural and contractual mismatches before systems are specified, designed, constructed, or integrated; avoidance of cost and schedule growth by more complete and precise specifications of cost and schedule estimates; and higher likelihood of successful integration on the first try. Safety advantages include effective delineation of must-work and must-not-work functions for integrated hazard analysis, the ability to formally demonstrate completeness of safety analyses, and provably correct logic for certification of flight readiness. The key mechanism for realizing these benefits is the development of an inter-functional architecture at the program level, which reveals relationships between top-level system requirements that would otherwise be invisible using only a physical architecture. This paper describes the advantages and pitfalls of functional analysis as a means of coordinating the actions of large heterogeneous organizations for space exploration programs.

program management↗
NASA NTRS2009

Layered Systems Engineering Engines

A notation is described for depicting the relationships between multiple, contemporaneous systems engineering efforts undertaken within a multi-layer system-of-systems hierarchy. We combined the concepts of remoteness of activity from the end customer, depiction of activity on a timeline, and data flow to create a new kind of diagram which we call a "Layered Vee Diagram." This notation is an advance over previous notations because it is able to be simultaneously precise about activity, level of granularity, product exchanges, and timing; these advances provide systems engineering managers a significantly improved ability to express and understand the relationships between many systems engineering efforts. Using the new notation, we obtain a key insight into the relationship between project duration and the strategy selected for chaining the systems engineering effort between layers, as well as insights into the costs, opportunities, and risks associated with alternate chaining strategies.

Vee Diagram↗
NASA NTRS2007

Constellation's Command, Control, Communications and Information (C3I) Architecture

Operations concepts are highly effective for: 1) Developing consensus; 2) Discovering stakeholder needs, goals, objectives; 3) Defining behavior of system components (especially emergent behaviors). An interoperability standard can provide an excellent lever to define the capabilities needed for system evolution. Two categories of architectures are needed in a program of this size are: 1) Generic - Needed for planning, design and construction standards; 2) Specific - Needed for detailed requirement allocations, interface specs. A wide variety of architectural views are needed to address stakeholder concerns, including: 1) Physical; 2) Information (structure, flow, evolution); 3) Processes (design, manufacturing, operations); 4) Performance; 5) Risk.

constellation↗
NASA NTRS2006

End-to-end information system concept for the Mars Telecommunications Orbiter

The Mars Telecommunications Orbiter (MTO) was intended to provide high-performance deep space relay links to landers, orbiters, sample-return missions, and approaching spacecraft in the vicinity of Mars, to demostrate interplanetary laser communications, to demonstrate autonomous navigation, and to carry out its own science investigations.

MTO↗
NASA NTRS1995

The Deep Space Network stability analyzer

A stability analyzer for testing NASA Deep Space Network installations during flight radio science experiments is described. The stability analyzer provides realtime measurements of signal properties of general experimental interest: power, phase, and amplitude spectra; Allan deviation; and time series of amplitude, phase shift, and differential phase shift. Input ports are provided for up to four 100 MHz frequency standards and eight baseband analog (greater than 100 kHz bandwidth) signals. Test results indicate the following upper bounds to noise floors when operating on 100 MHz signals: -145 dBc/Hz for phase noise spectrum further than 200 Hz from carrier, 2.5 x 10(exp -15) (tau =1 second) and 1.5 x 10(exp -17) (tau =1000 seconds) for Allan deviation, and 1 x 10(exp -4) degrees for 1-second averages of phase deviation. Four copies of the stability analyzer have been produced, plus one transportable unit for use at non-NASA observatories.

Breidenthal, Julian C.↗