Search NASA⌕ Search

Engineering topics

Brian Richardson

Publications and source records attributed to Brian Richardson.

Transcriptomic Changes in Seedlings from Seeds Exposed to Simulated Space Radiation

Outside the protection of Earth’s magnetic field, living organisms are constantly exposed to space radiation that consists of energetic protons and other heavier charged particles. With the goal of manned Mars exploration, the production of fresh crop during long duration space missions can be beneficial for meeting astronauts’ nutritional and psychological needs. In our study, we not only evaluated plant/fruit morphometrics and edible fresh mass, but also analyzed transcriptomic changes in seedlings from seeds of three plant species (Arabidopsis, mizuna, and tomato) exposed to simulated Galactic Cosmic Rays(GCR) and solar particle events(SPE). The radiation experiments were performed in the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). 10-day Arabidopsis seedlings were exposed acutely (~240 cGy/hr) to simulated GCR scenarios of combined ions including protons, helium, oxygen, titanium, and/or iron ions at 40 or 80 cGy. Seeds of Arabidopsis, mizuna, and tomato were exposed to 40 or 80 cGy simulated GCR (dry seeds) or SPE (imbibed seeds) at lower dose rates(20-26 cGy/hr). Seedlings from control and irradiated seeds were then collected in RNAlater at similar growth stages with true leaves emerged. Total RNA was isolated and analyzed via Illumina whole transcriptome sequencing technology. Plant species-specific bioinformatics revealed transcriptional biomarkers and signaling pathways induced by simulated space radiation that were found to be dose, dose-rate, and species dependent. DNA damage response, stress signaling, and metabolic pathways are among the most significant changes. These data highlight some critical insights on the mechanisms of how plants respond and adapt to the space radiation environment and provide a molecular basis for crop selection and refinement in deep space exploration.

Anirudha Dixit↗

Validation and Development of a Fast-Running CFD Model for the No-Vent Fill of Liquid Propellant Tank

Cryogenic fluids, while offering higher energy density than storable propellants, present several handling challenges, including gradual boil-off and tank self-pressurization. Transferring these propellants between tanks can be problematic, as the receiving tank's temperature and pressure often lead to flashing and rapid boil-off upon injection. The No-Vent Fill (NVF) technique mitigates these risks by preventing liquid fuel from being expelled overboard. By controlling tank pressure and ensuring appropriate condensation in the ullage region, the NVF process avoids exceeding vent pressure limits. In this study, Loci/STREAM-VOF simulations were compared with data from NASA K-site test runs on a 2.1 cubic meter tank with a bottom orifice under various no-vent fill conditions, including different wall temperatures, flow rates, and inlet liquid temperatures. The effort demonstrated that Loci/STREAM-VOF is capable of quantitatively capturing the important physics of NVF with submerged jets: (1) validation of the liquid-vapor interface turbulence velocity using previous experimental data showed good agreement at different fill levels; (2) validation of the CFD Stanton number for mass transfer provided an adequate mass transfer coefficient range; (3) consistent pressure agreements were found in the pressure history for both cold and warm conditions; and (4) the variations of final pressure with flow rate and inlet liquid temperature were well predicted by the CFD simulation. The application of NVF for low-gravity conditions will be studied in future work.

CFD↗

Validation and Development of a Fast-Running CFD Model for the No-Vent Fill of Liquid Propellant Tank

Cryogenic fluids, while offering higher energy density than storable propellants, present several handling challenges, including gradual boil-off and tank self-pressurization. Transferring these propellants between tanks can be problematic, as the receiving tank's temperature and pressure often lead to flashing and rapid boil-off upon injection. The No-Vent Fill (NVF) technique mitigates these risks by preventing liquid fuel from being expelled overboard. By controlling tank pressure and ensuring appropriate condensation in the ullage region, the NVF process avoids exceeding vent pressure limits. In this study, Loci/STREAM-VOF simulations were compared with data from NASA K-site test runs on a 2.1 cubic meter tank with a bottom orifice under various no-vent fill conditions, including different wall temperatures, flow rates, and inlet liquid temperatures. The effort demonstrated that Loci/STREAM-VOF is capable of quantitatively capturing the important physics of NVF with submerged jets: (1) validation of the liquid-vapor interface turbulence velocity using previous experimental data showed good agreement at different fill levels; (2) validation of the CFD Stanton number for mass transfer provided an adequate mass transfer coefficient range; (3) consistent pressure agreements were found in the pressure history for both cold and warm conditions; and (4) the variations of final pressure with flow rate and inlet liquid temperature were well predicted by the CFD simulation. The application of NVF for low-gravity conditions will be studied in future work.

CFD↗

Computational Fluid Dynamics Simulation of A Hazardous Gas Purge System in an EUS Aft Adapter Umbilical Plate Concept

The Fluid Dynamics Branch at the NASA Marshall Space Flight Center actively supports flight programs through a variety of in-line analyses. One area of expertise is the mitigation of hazardous gas mixtures that may form during nominal vehicle fueling operation. After the successful Artemis I launch, design cycles for future iterations of the vehicle are in progress. The subject of this work concerns the analysis of a hazardous gas mitigation system concept for a future upper stage.

Riley Bridges↗