Search NASA⌕ Search

Engineering topics

Briggs, Timothy

Publications and source records attributed to Briggs, Timothy.

At least 19 records

Mode I fracture testing fixture

An apparatus and method for preparing Double Cantilever Beam (DCB) specimens are disclosed as an apparatus and method for conducting Mode I fracture resistance testing using the DCB specimens. In a first embodiment, a drill jig is used to locate the DCB specimen and guide a drilling process during creation of at least one through-hole in the DCB specimen. The drilling process may employ a traditional drill and drill bit, a laser drill, or a water jet. In another embodiment, a set of rotating pin blocks, each with a full-round or a half-round specimen pin at one end and a hanger full-round pin at the other end, engage the DCB specimen and facilitate the internal application of a fracturing load to the DCB specimen for the Mode I fracture resistance test. The present invention may significantly reduce the time and materials needed to prepare and test a DCB specimen.

Briggs, Timothy↗

Wire rivet

A rivet assembly for securing a wire in electrical communication with a substrate having a hollow cylindrical body with a first opening at a proximal end and a second opening at a distal end. The rivet assembly further includes a wire with a portion in electrical communication with the cylindrical body. The rivet assembly yet further includes a compression mechanism configured for use selectively compressing the cylindrical body along an axial direction. Compression of the cylindrical body can cause diametric expansion of an outer diameter of the cylindrical body to retain the cylindrical body within a substrate. The rivet assembly additionally includes wire retention structure configured for holding the wire in electrical contact with the compressed cylindrical body.

Briggs, Timothy↗

Mode I fracture testing fixture

An apparatus and method for preparing Double Cantilever Beam (DCB) specimens are disclosed as an apparatus and method for conducting Mode I fracture resistance testing using the DCB specimens. In a first embodiment, a drill jig is used to locate the DCB specimen and guide a drilling process during creation of at least one through-hole in the DCB specimen. The drilling process may employ a traditional drill and drill bit, a laser drill, or a water jet. In another embodiment, a set of rotating pin blocks, each with a full-round or a half-round specimen pin at one end and a hanger full-round pin at the other end, engage the DCB specimen and facilitate the internal application of a fracturing load to the DCB specimen for the Mode I fracture resistance test. The present invention may significantly reduce the time and materials needed to prepare and test a DCB specimen.

Briggs, Timothy↗

Enhanced composites via selective interfacial modification

A laminate comprising a first ply, a second ply, and a third ply which sandwiching the second ply between the first ply and the third ply. The laminate further includes a first plurality of interfacial modifiers arranged between opposing faces of the first ply and the second ply. The first plurality of interfacial modifiers are arranged in a first pattern. The laminate includes a second plurality of interfacial modifiers arranged between opposing faces of the second ply and the third ply such that the first plurality of interfacial modifiers and the second plurality of interfacial modifiers are arranged on opposite faces of the second ply. The second plurality of interfacial modifiers are arranged in a second pattern. The first pattern and the second pattern are configured to increase crack growth resistance of the laminate by selectively toughening portions of the laminate to control propagation of interfacial cracks within the laminate.

Sills, Ryan B.↗

Selective modifiers for composite material property enhancement

A laminate comprising a first ply, a second ply, and a plurality of interfacial modifiers arranged between opposing faces of the first ply and the second ply. A chemical composition of an interfacial modifier of the plurality of interfacial modifiers can be selected based on a resulting bond strength between the interfacial modifier of the plurality of interfacial modifiers and at least one of the first ply or the second ply. The plurality of interfacial modifiers can be arranged in a pattern to selectively modify toughness of a portion of the laminate based on the bond strength of the interfacial modifier of the plurality of interfacial modifiers.

Briggs, Timothy↗

Mechanical Strength of Composites with Different Overlap Lengths

This work is to characterize the mechanical performances of the selected composites with four different overlap lengths of 0.25 in, 0.5 in, 0,75 in and 1.0 in. The composite materials in this study were one carbon composite (AS4C/UF3662) and one glass (E-glass/UF3662) composite. They both had the same resin of UF 3362, but with different fibers of carbon AS4C and E-glass. The mechanical loading in this study was limited to the quasi-static loading of 2 mm/min, which was equivalent to 5x10 (-4) strain rate. Digital cameras were set up to record images during the mechanical testing. The full-field deformation data obtained from Digital Image Correlation (DIC) and the side view of the specimens were used to understand the different failure modes of the composites. The maximum load and the ultimate strength with consideration of the location of the failure for the different overlap lengths were compared and plotted together to understand the effect of the overlap lengths on the mechanical performance of the overlapped composites.

36 MATERIALS SCIENCE↗

Mechanical Properties of Woven Composites at Ambient Temperature

This report describes the mechanical characterization of six types of woven composites that Sandia National Laboratories are interested in. These six composites have various combinations of two types of fibers (Carbon-IM7 and Glass-S2) and three types of resins (UF-3362, TC275-1, TC350-1). In this work, two sets of experiments were conducted: quasi-static loading with displacement rate of 2 mm/min (1.3x10 ^(-3) in/s) and high rate loading with displacement of 5.08 m/s (200 in/s). Quasi-static experiments were performed at three loading orientations of 0°, 45°, 90° for all the six composites to fully characterize their mechanical properties. The elastic properties Young's modulus and Poisson's ratio, as well as ultimate stress and strain were obtained from the quasi-static experiments. The high strain rate experiments were performed only on glass fiber composites along 0° angle of loading. The high rate experiments were mainly to study how the strain rate affects the ultimate stress of the glass-fiber composites with different resins.

36 MATERIALS SCIENCE↗

Mechanical Characterization of Woven Composites at Different Temperatures

This work is to characterize the mechanical properties of the selected composites along both on- and off- fiber axes at the ambient loading condition (+25°C), as well as at the cold (-54°C), and high temperatures (+71°C). A series of tensile experiments were conducted at different material orientations of 0°, 22.5°, 45°, 67.5°, 90° to measure the ultimate strength and strain $σ_{f}, ϵ_{f}$, and material engineering constants, including Young's modulus Ε and Poisson's ratio ν. The composite materials in this study were one carbon composite carbon (AS4C/UF3662) and one E-galss (E-glass/UF3662) composite. They both had the same resin of UF 3362, but with different fibers of carbon AS4C and E-glass. The mechanical loading in this study was limited to the quasi-static loading of 2 mm/min (1.3x10 ^(-3) in/s), which was equivalent to 5x10 (-4) strain rate. These experimental data of the mechanical properties of composites at different loading directions and temperatures were summarized and compared. These experimental results provided database for design engineers to optimize structures through ply angle modifications and for analysts to better predict the component performance.

36 MATERIALS SCIENCE↗

Grips for testing of electrical characteristics of a specimen under a mechanical load

Various technologies to facilitate coupled electrical and mechanical measurement of conductive materials are disclosed herein. A gripping device simultaneously holds a specimen in place and causes contact to be made between the specimen and a plurality of electrodes connected to an electrical measuring device. An electrical characteristic of the specimen is then measured while a mechanical load is applied to the specimen, and a relationship between the mechanical load and changes in the electrical characteristic can be identified.

47 OTHER INSTRUMENTATION↗

Verification and validation of residual stresses in composite structures

Process-induced residual stresses occur in composite structures composed of dissimilar materials. As these residual stresses could result in fracture, their consideration when designing composite parts is necessary. However, the experimental determination of residual stresses in prototype parts can be time and cost prohibitive. Alternatively, it is possible for computational tools to predict potential residual stresses. Therefore, the objectives of the presented work are to demonstrate an efficient method for simulating residual stresses in composite parts, as well as the potential value of statistical methods during analyses for which material properties are unknown. Specifically, a simplified residual stress modeling approach is implemented within Sandia National Laboratories’ SIERRA/SolidMechanics code. Concurrent with the model development, bi-material composite structures are designed and manufactured to exhibit significant residual stresses. Then, the presented modeling approach is rigorously verified and validated through simulations of the bi-material composite structures’ manufacturing processes, including a mesh convergence study, sensitivity analysis, and uncertainty quantification. The simulations’ final results show adequate agreement with the experimental measurements, indicating the validity of a simple modeling approach, as well as a necessity for the inclusion of material parameter uncertainty in the final residual stress predictions.

42 ENGINEERING↗

Validation and Verification of Multi-Material Split Rings

Process induced residual stresses commonly occur in composite structures composed of dissimilar materials. These residual stresses form due to differences in the composite materials coefficients of thermal expansion as well as the shrinkage upon cure exhibited by most thermoset polymer matrix materials. Depending upon the specific geometric details of the composite structure and the materials curing parameters, it is possible that these residual stresses can result in interlaminar delamination and fracture within the composite as well as plastic deformation in the structures metallic materials. It is important to consider potential residual stresses when designing composite parts and their manufacturing processes. However, the experimental determination of residual stresses in prototype parts can be prohibitive, both in terms of financial and temporal costs. As an alternative to physical measurement, it is possible for computational tools to be used to quantify potential residual stresses in composite prototype parts. A simplified method for simulating residual stresses was previously validated with two simple bi-material structures. Continuing on, the objective of this study is to further validate the simplified method for simulating residual stresses for bi-material split rings of different composites and layup variations. The validation process uses uncertainty quantification to develop a distribution of possible simulated residual stress states that are compared to experimentally measured residual stress states of fabricated structures similar to those simulated. The results of the comparisons indicate that the proposed finite element modeling approach is capable of accurately simulating the formation of residual stresses in composite structures and a temperature independent material model is adequate within the composites glassy region.

36 MATERIALS SCIENCE↗