Engineering topics

Briley, W. R.

Publications and source records attributed to Briley, W. R..

At least 19 records

NASA NTRS1990

Navier-Stokes simulation of transonic blade-vortex interactions

Transonic strong blade-vortex interaction is numerically analyzed by solving the unsteady two-dimensional Navier-Stokes equations using an iterative implicit second order scheme. The dominant processes during the interaction are the development of large transverse pressure gradients in the upper leading edge region and the development of disturbances at the root of the lower surface shock wave. As a result of this interaction, high pressure pulses are emitted from the leading edge, and acoustic waves are radiated from the lower surface in a region originally occupied by a supersonic pocket. In addition, severe load variations occur when the vortex is within one chord length of the blade.

Liu, N.-S.↗

NASA NTRS1990

Two- and three-dimensional blade vortex interactions

A three-dimensional time dependent Navier-Stokes analysis was applied to the rotor blade vortex interaction (BVI) problem. The numerical procedure is an iterative implicit procedure using three point central differences to represent spatial derivatives. A series of calculations were made to determine the time steps, pseudo-time steps, iterations, artificial dissipation level, etc. required to maintain a nondissipative vortex. Results show the chosen method to have excellent non-dissipative properties provided the correct parameters are chosen. This study was used to set parameters for both two- and three-dimensional blade vortex interaction studies. The two-dimensional study considered the interaction between a vortex and a NACA0012 airfoil. The results showed the detailed physics during the interaction including the pressure pulse propagating from the blade. The simulated flow physics was qualitatively similar to that experimentally observed. The 2-D BVI phenomena is the result of the buildup and violent collapse of the shock waves and local supersonic pockets on the blade surfaces. The resulting pressure pulse build-up appears to be centered at the blade leading edge. The three-dimensional interaction study considered the case of a vortex at 20 deg incidence to the blade leading edge. Although the qualitative results were similar to that of the two-dimensional interaction, details clearly showed the three-dimensional nature of the interaction process.

Davoudzadeh, F.↗

NASA NTRS1989

Solution of the incompressible Navier-Stokes equations using artificial compressibility methods

A modified artificial compressibility formulation is derived from a preconditioned low Mach number compressible formulation, and these two methods are compared on a two-dimensional laminar leading edge flow using a LBI/ADI solution algorithm. The two methods are essentially equivalent with appropriate preconditioning parameters and have the same convergence rates and efficiency, giving 4 orders of residual reduction in about 75 iterations with a vectorized CRAY-XMP run time of 20 seconds for 3000 grid points.

Briley, W. R.↗

NASA NTRS1987

Two- and three-dimensional turbine blade row flow field simulations

Work performed in the numerical simulation of turbine passage flows via a Navier-Stokes approach is discussed. Both laminar and turbulent simulations in both two and three dimensions are discussed. An outline of the approach, background, and an overview of the results are given.

Buggeln, R. C.↗

NASA NTRS1986

Turbine stator flow field simulations

The increased capability and accessibility of modern computers, coupled with increasingly sophisticated and accurate numerical and physical modeling, has led to a marked impact of numerical simulations upon current turbine design and research problems. The turbine section represents a considerable challenge as it contains significant regions of complex three-dimensional flow, including both aerodynamic and heat transfer phenomena. The focus of the present effort is the development of an efficient and accurate three-dimensional Navier-Stokes calculation procedure for application to the turbine stator and rotor problems. In particular, an effective procedure is sought which: (1) adequately represents the flow physics, (2) allows for sufficient resolution in regions of small length scale, and (3) has sufficiently good convergence properties so as to allow use on a regular basis.

Buggeln, R. C.↗

NASA NTRS1985

Flow in a model turbine stator

In view of the complex nature of the flowfield in the hot section of gas turbine engines, the need to predict heat transfer and flow losses, the possible appearance of separation and strong secondary flows, etc., the present effort is focusing upon a Navier-Stokes approach to the three dimensional turbine stator problem. The advantages of a full Navier-Stokes approach are clear since when combined with a suitable turbulence model these equations represent the flow and heat transfer physics. In particular, the Navier-Stokes equations accurately represent possible separated regions and regions of significant secondary flow. In addition, the Navier-Stokes approach allows representation of the entire flow field by a single set of equations, thus avoiding problems associated with representing different regions of the flow by different equations and then matching flow regions.

Buggeln, R. C.↗

NASA NTRS1984

Three-dimensional viscous flows with large secondary velocity

A new system of approximation equations is derived for three-dimensional steady viscous compressible flows in which a primary-flow direction is present, but in which both transverse velocity components can be large. Previous approaches which address simplification of the steady Navier-Stokes equations are discussed, and a new approach is proposed. The transverse velocity vector which corrects a given potential flow has been decomposed into potential and rotational components. It is found that the potential-velocity vector may be assumed small, whereas the rotational-velocity vector may be assumed small, whereas the rotational velocity vector and hence the composite secondary flow can be of order unity. This assumption leads to a system of governing equations whose characteristic polynomial has a non-elliptic form for arbitrary Mach numbers. The resulting non-elliptic approximation equations can be solved as an initial/boundary-value problem. Computed results confirm the small scalar-potential approximation.

Briley, W. R.↗

NASA NTRS1983

Further development of a method for computing three-dimensional subsonic viscous flows in turbofan lobe mixers

Procedure for computing subsonic, turbulent flow in turbofan lobe mixers was extended to allow consideration of flow fields in which a swirl component of velocity may be present. Additional, an optional k-lambda turbulence model was added to the procedure. The method of specifying the initial flow field was also modified, allowing parametric specification or radial secondary flow velocities, and making it possible to consider initial flow fields which have significant inlet secondary flow vorticity. A series of example calculations was performed which demonstrate the various capabilities of the modified code. These calculations demonstrate the effects of initial secondary flows of various magnitudes, the effects of swirl, and the effects of turbulence model on the mixing process. The results of these calculations indicate that the initial secondary flows, presumed to be generated within the lobes, play a dominant role in the mixing process, and that the predicted results are relatively insensitive to the turbulence model used.

Lin, S. J.↗

NASA NTRS1982

Turbofan forced mixer-nozzle internal flowfield. Volume 3: A computer code for 3-D mixing in axisymmetric nozzles

A finite difference method is developed for making detailed predictions of three dimensional subsonic turbulent flow in turbofan lobe mixers. The governing equations are solved by a forward-marching solution procedure which corrects an inviscid potential flow solution for viscous and thermal effects, secondary flows, total pressure distortion and losses, internal flow blockage and pressure drop. Test calculations for a turbulent coaxial jet flow verify that the turbulence model performs satisfactorily for this relatively simple flow. Lobe mixer flows are presented for two geometries typical of current mixer design. These calculations included both hot and cold flow conditions, and both matched and mismatched Mach number and total pressure in the fan and turbine streams.

Kreskovsky, J. P.↗

NASA NTRS1981

A three-dimensional turbulent compressible subsonic duct flow analysis for use with constructed coordinate systems

An approximate analysis is presented which is applicable to nonorthogonal coordinate systems having a curved centerline and planar transverse coordinate surfaces normal to the centerline. The primary flow direction is taken to coincide with the local direction of the duct centerline and is hence normal to transverse coordinate planes. The formulation utilizes vector components (velocity, vorticity, transport equations) defined in terms of local Cartesian directions aligned with the centerline tangent, although the governing equations themselves are expressed in general nonorthogonal coordinates. For curved centerlines, these vector quantities are redefined in new local Cartesian directions at each streamwise location. The use of local Cartesian variables and fluxes leads to governing equations which require only first derivatives of the coordinate transformation, and this provides for the aforementioned ease in using constructed coordinates.

Levy, R.↗

NASA NTRS1981

Prediction of laminar and turbulent primary and secondary flows in strongly curved ducts

The analysis is based on a primary secondary velocity decomposition in a given coordinate system, and leads to approximate governing equations which correct an a priori inviscid solution for viscous effects, secondary flows, total pressure distortion, heat transfer, and internal flow blockage and losses. Solution of the correction equations is accomplished as an initial value problem in space using an implicit forward marching technique. The overall solution procedure requires significantly less computational effort than Navier-Stokes algorithms. The solution procedure is effective even with the extreme local mesh resolution which is necessary to solve near wall sublayer regions in turbulent flow calculations. Computed solutions for both laminar and turbulent flow compared very favorably with available analytical and experimental results. The overall method appears very promising as an economical procedure for making detailed predictions of viscous primary and secondary flows in highly curved passages.

Kreskovsky, J. P.↗

NASA NTRS1981

Analysis and computation of three-dimensional flow in strongly curved ducts

Numerical solutions are presented for three-dimensional laminar and turbulent flow in curved ducts of rectangular cross section and significant curvature. The analysis is based on a primary-secondary velocity decomposition in a given coordinate system, and leads to approximate governing equations which correct an a priori inviscid solution for viscous effects, secondary flows, total pressure distortion, heat transfer, and internal flow blockage and losses. Solution of the correction equations is accomplished as an initial-value problem in space using an implicit forward-marching technique. The overall solution procedure requires significantly less computational effort than Navier-Stokes algorithms. The present solution procedure is effective even with the extreme local mesh resolution which is necessary to resolve near-wall sublayer regions in turbulent flow calculations. Computed solutions for both laminar and turbulent flow compare very favorably with available analytical and experimental results.

Kreskovsky, J. P.↗

NASA NTRS1980

A three-dimensional turbulent compressible subsonic duct flow analysis for use with constructed coordinate systems

An approximate analysis, applicable to nonorthogonal coordinate systems having a curved centerline and planar transverse coordinate surfaces normal to the centerline, is presented for computation of three-dimensional subsonic flow in straight and curved diffusers. The formulation is intended to facilitate the use of constructed coordinates in circumstances where it is difficult to maintain smooth behavior in higher derivatives; the use of local Cartesian variables and fluxes leads to governing equations which require only first derivatives of the coordinate transformation. The analysis is applied to a particular family of duct and diffuser geometries having curved centerlines and superelliptic cross sections. Qualitative agreement with experimental measurements is observed with regard to streamwise vortices and distortion of the primary flow.

Levy, R.↗

NASA NTRS1979

A viscous flow analysis for the tip vortex generation process

A three dimensional, forward-marching, viscous flow analysis is applied to the tip vortex generation problem. The equations include a streamwise momentum equation, a streamwise vorticity equation, a continuity equation, and a secondary flow stream function equation. The numerical method used combines a consistently split linearized scheme for parabolic equations with a scalar iterative ADI scheme for elliptic equations. The analysis is used to identify the source of the tip vortex generation process, as well as to obtain detailed flow results for a rectangular planform wing immersed in a high Reynolds number free stream at 6 degree incidence.

Shamroth, S. J.↗

NASA NTRS1979

A viscous flow analysis of the tip vortex generation process

A viscous primary-secondary flow analysis designed for numerical solution by forward marching integration is applied to the tip vortex generation problem. Equations governing streamwise momentum, streamwise vorticity, and a gas law are solved in conjunction with equations governing scalar and vector surface potentials for the secondary velocities. The numerical method used combines a consistently split linearized block implicit (LBI) scheme for parabolic equations and a scalar iterative ADI scheme for elliptic equations. Computed results are presented for a wing of rectangular planform immersed in a high Reynolds number stream at 6 degrees incidence. The physical mechanism for generation of the tip vortex, as revealed by the analysis and computations, is discussed. Detailed flow results for the case of 6 degree incidence are included.

Shamroth, S. J.↗

NASA NTRS1979

Analysis and computation of viscous subsonic primary and secondary flows

A new approximate flow analysis, designed to enable numerical solution as an initial value problem, is developed for a wide class of viscous subsonic flows at high Reynolds number and in straight or smoothly curved three-dimensional flow geometries. The analysis is coordinate-independent and corrects an a priori known inviscid primary flow for viscous and thermal effects, secondary flows, total pressure distortion, internal flow blockage and pressure drop. Computed results include laminar solutions for three-dimensional boundary layer flow, fully viscous flow in circular arc ducts, and also flow in a curved duct shaped like a turbine blade passage.

Briley, W. R.↗

NASA NTRS1979

Calculation of three-dimensional turbulent subsonic flows in transition ducts

A method for computing three-dimensional turbulent subsonic flow in curved ducts is being developed. A set of tube-like surface oriented coordinates is employed for a general class of geometries applicable to subsonic diffusers with offset bends. The geometric formulation is complex and no previous treatment of this class of viscous flow problems is known to the authors. The duct centerline is a space curve specified by piecewise polynomials. A Frenet frame is located on the centerline at each axial location. The cross sections are described by superellipses imbedded in the Frenet frame. Duct surfaces are also coordinate surfaces, which greatly simplifies the boundary conditions. The resulting coordinates are nonorthogonal. An approximate set of governing equations is employed for viscous flows having strong flow in a primary flow direction. The derivation is coordinate invariant and the resulting equations are expressed in tensor form. These equations are solved by an efficient alternating direction implicit (ADI) method. This numerical method is generally stable and permits solution in difficult geometries using the general tensor formulation.

Levy, R.↗

NASA NTRS1978

Development of a three-dimensional turbulent duct flow analysis

A method for computing three-dimensional turbulent subsonic flow in curved ducts is described. An approximate set of governing equations is given for viscous flows which have a primary flow direction. The derivation is coordinate invariant, and the resulting equations are expressed in terms of tensors. General tube-like coordinates were developed for a general class of geometries applicable to many internal flow problems. The coordinates are then particularized to pipes having superelliptic cross sections whose shape can vary continuously between a circle and a near rectangle. The analysis is applied to a series of relevant aerodynamic problems including transition from nearly square to round pipes and flow through a pipe with an S-shaped bend.

Eiseman, P. R.↗