Search NASA⌕ Search

Engineering topics

Brombin, M

Publications and source records attributed to Brombin, M.

Diagnostics of the ITER neutral beam test facility

The ITER heating neutral beam (HNB) injector, based on negative ions accelerated at 1 MV, will be tested and optimized in the SPIDER source and MITICA full injector prototypes, using a set of diagnostics not available on the ITER HNB. The RF source, where the H{sup -}/D{sup -} production is enhanced by cesium evaporation, will be monitored with thermocouples, electrostatic probes, optical emission spectroscopy, cavity ring down, and laser absorption spectroscopy. The beam is analyzed by cooling water calorimetry, a short pulse instrumented calorimeter, beam emission spectroscopy, visible tomography, and neutron imaging. Design of the diagnostic systems is presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A new calibration code for the JET polarimeter

An equivalent model of JET polarimeter is presented, which overcomes the drawbacks of previous versions of the fitting procedures used to provide calibrated results. First of all the signal processing electronics has been simulated, to confirm that it is still working within the original specifications. Then the effective optical path of both the vertical and lateral chords has been implemented to produce the calibration curves. The principle approach to the model has allowed obtaining a unique procedure which can be applied to any manual calibration and remains constant until the following one. The optical model of the chords is then applied to derive the plasma measurements. The results are in good agreement with the estimates of the most advanced full wave propagation code available and have been benchmarked with other diagnostics. The devised procedure has proved to work properly also for the most recent campaigns and high current experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A 3D approach to equilibrium, stability and transport studies in RFX-mod improved regimes

The full three-dimensional (3D) approach is now becoming an important issue for all magnetic confinement configurations. It is a necessary condition for the stellarator but also the tokamak and the reversed field pinch (RFP) now cannot be completely described in an axisymmetric framework. For the RFP the observation of self-sustained helical configurations with improved plasma performances require a better description in order to assess a new view on this configuration. In this new framework plasma configuration studies for RFX-mod have been considered both with tools developed for the RFP as well as considering codes originally developed for the stellarator and adapted to the RFP. These helical states are reached through a transition to a very low/reversed shear configuration leading to internal electron transport barriers. These states are interrupted by MHD reconnection events and the large T(e) gradients at the barriers indicate that both current and pressure driven modes are to be considered. Furthermore the typically flat T(e) profiles in the helical core have raised the issue of the role of electrostatic and electromagnetic turbulence in these reduced chaos regions, so that a stability analysis in the correct 3D geometry is required to address an optimization of the plasma setup. In this view the VMEC code proved to be an effective way to obtain helical equilibria to be studied in terms of stability and transport with a suite of well tested codes. In this work, the equilibrium reconstruction technique as well as the experimental evidence of 3D effects and their first interpretation in terms of stability and transport are presented using both RFP and stellarator tools.

COEFFICIENTS↗

Systematic comparison between line integrated densities measured with interferometry and polarimetry at JET

A systematic comparison between the line integrated electron density derived from interferometry and polarimetry at JET has been carried out. For the first time the reliability of the measurements of the Cotton-Mouton effect has been analyzed for a wide range of main plasma parameters and the possibility to evaluate the electron density directly from polarimetric data has been studied. The purpose of this work is to recover the interferometric data with the density derived from the measured Cotton-Mouton effect, when the fringe jump phenomena occur. The results show that the difference between the line integrated electron density from interferometry and polarimetry is with one fringe (1.143x10{sup 19} m{sup -2}) for more than 90% of the cases. It is possible to consider polarimetry as a satisfactory alternative method to interferometry to measure the electron density and it could be used to recover interferometric signal when a fringe jumps occurs, preventing difficulties for the real-time control of many experiments at the JET machine.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvement of the magnetic configuration in the reversed field pinch through successive bifurcations

The reversed field pinch (RFP) is a magnetic configuration alternative to the tokamak that can be considered for a second generation of reactors. In this paper new remarkable results obtained in the RFP experiment RFX-mod are presented, showing that an internal transport barrier delimitates a large fraction of the plasma volume in a RFP when the current is raised to {approx}1.5 MA. The formation of this transport barrier is related to a profound, spontaneous modification of the magnetic topology. Due to the occurrence of a saddle node bifurcation the plasma enters in the single helical axis state, which is theoretically known to be more resilient to chaos. This bifurcation is driven by the amplitude of the helical perturbation which dominates the mode spectrum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Models comparison for JET polarimeter data

A complete comparison between the theory and the measurements in polarimetry was done by using the Far Infrared Polarimeter at JET. More than 300 shots were analyzed, including a wide spectrum of JET scenarios in all critical conditions for polarimetry: high density, high and very low fields, high temperatures.This work is aimed at the demonstration of the robustness of the theoretical models for the JET polarimeter measurements in the perspective of using these models for ITER like plasma scenarios . In this context, an assessment was performed on how the line-integrated plasma density along the central vertical chord of FIR polarimeter could be evaluated using the Cotton-Mouton effect and its possible concrete use to correct fringe jumps of the interferometer.The models considered are: i) the rigorous numerical solution of the Stokes propagation equations, using dielectric tensor evaluated from JET equilibrium and Thomson scattering [1,2]; ii) two types of approximated solutions [2,3] and iii) the Guenther empirical model [4] that considers the mutual effect between Cotton-Mouton and Faraday rotation angle. The model calculations have been compared with polarimeter measurements for the Cotton-Mouton phase shift.The agreement with theory is satisfactory within the limits of experimental errors [3].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗