Search NASA⌕ Search

Engineering topics

Brombosz, Scott M.

Publications and source records attributed to Brombosz, Scott M..

The Role of MgCl 2 as a Lewis Base in ROMgCl–MgCl 2 Electrolytes for Magnesium‐Ion Batteries

Abstract A series of strong Lewis acid‐free alkoxide/siloxide‐based Mg electrolytes were deliberately developed with remarkable oxidative stability up to 3.5 V (vs. Mg/Mg 2+ ). Despite the perception of ROMgCl (R=alkyl, silyl) as a strong base, ROMgCl acts like Lewis acid, whereas the role of MgCl 2 in was unambiguously demonstrated as a Lewis base through the identification of the key intermediate using single crystal X‐ray crystallography. This Lewis‐acid‐free strategy should provide a prototype system for further investigation of Mg‐ion batteries.

Pan, Baofei↗

MgCl 2 : The Key Ingredient to Improve Chloride Containing Electrolytes for Rechargeable Magnesium-Ion Batteries

The effect of MgCl2 on a series of chloride containing magnesium electrolytes was investigated. In the presence of extra MgCl2, the electrochemical properties of Grignard reagents (RMgCl, R = Ph, Et, iPr) were significantly improved, and the advance of MgCl2 was further demonstrated in Mg-Mo6S8 rechargeable batteries with improved capacities and much smaller over-potentials. MgCl2 was then further proven to be powerful reagent to improve the performance of well-established strong Lewis acid derived magnesium electrolytes including the “all-phenyl” complex (APC) and alkoxide-based magnesium electrolytes. The results suggest that MgCl2 salt is a very important species to benefit all chloride containing electrolytes for rechargeable magnesium-ion batteries.

Magnesium ion batteries, electrolytes, chlorides↗

Cascade synthesis of a gold nanoparticle-network polymer composite

In this paper, the multi-step, cascade synthesis of a self-supporting, hierarchically-structured gold nanoparticle hydrogel composite is described. The composite is spontaneously prepared from a non-covalent, lamellar lyotropic mesophase composed of amphiphiles that support the reactive constituents, a mixture of hydroxyl- and acrylate-end-derivatized PEO 117 -PPO 47 -PEO 117 and [AuCl 4 ] - . The reaction sequence begins with the auto-reduction of aqueous [AuCl 4 ] - by PEO 117 -PPO 47 -PEO 117 which leads to both the production of Au NPs and the free radical initiated polymerization and crosslinking of the acrylate endderivatized PEO 117 -PPO 47 -PEO 117 to yield a network polymer. Optical spectroscopy and TEM monitored the reduction of [AuCl 4 ] - , formation of large aggregated Au NPs and oxidative etching into a final state of dispersed, spherical Au NPs. ATR/FT-IR spectroscopy and thermal analysis confirms acrylate crosslinking to yield the polymer network. X-ray scattering (SAXS and WAXS) monitored the evolution of the multilamellar structured mesophase and revealed the presence of semi-crystalline PEO confined within the water layers. The hydrogel could be reversibly swollen without loss of the well-entrained Au NPs with full recovery of composite structure. Finally, optical spectroscopy shows a notable red shift (Δλ~ 45 nm) in the surface plasmon resonance between swollen and contracted states, demonstrating solvent-mediated modulation of the internal NP packing arrangement.

36 MATERIALS SCIENCE↗

Installation of a reactive site for covalent wiring onto an intrinsically conductive poly(ionic liquid)

Post-polymerization radical bromination of a nanostructured poly(ionic liquid) that selectively introduces a reactive bromo-group onto the polyalkylthiophene backbone is described. Raman and FTIR spectroscopy proves that the bromine is successfully introduced at the 3-methyl position of the thiophene and that the molecular structure of the polymer remains largely intact with only minimal chain scission detected. FT-IR and Vis-NIR spectroscopy indicates that incorporation of the bromine induces twisting (loss of co-planarity) of the polythiophene backbone. WAXS confirms retention of an ordered lamellar structure with minor lattice spacing contraction. Cyclic voltammetry confirms spectroscopic findings that the bromination reaction yields a stable p-doped polymer. The installed bromine is susceptible to nucleophilic displacement permitting the covalent attachment of other functional molecules, such as a dialkylphosphonate. Elemental analysis of such a transformation established that 100% functionalization can be achieved. These results collectively demonstrate that post-modification of a pconjugated polymer can be used to both tune electronic and photonic properties, as well as install a chemoselective attachment point for the covalent wiring of other molecules.

Brombosz, Scott M.↗

Patterning a π-conjugated polyelectrolyte through sequential polymerization of a bifunctional ionic liquid monomer

An electronically conductive polyelectrolyte is prepared by the sequential polymerization of a bifunctional imidazolium-based ionic liquid (IL) monomer, composed of a thienyl and vinyl containing cation paired with a tetrafluoroborate anion. In the first step, potentiodynamic electropolymerization of the thienyl moiety forms a cationic polyalkylthiophene that is soluble in select organic solvents. Cyclic voltammetry (CV) was used to determine the polymer p-doping potential (0.31 V) and the bipolaronic state (1.49 V). The polymer exhibits electrochromism, converting from red in the neutral state (lambda(max) = 443 nm) to dark blue in the polaronic state (lambda(max) = 819 nm). The solution-processable polymer can be cast into a film, masked and patterned by UV-initiated free radical polymerization of the vinyl moiety. Small-angle X-ray scattering (SAXS) revealed that the insoluble crosslinked polyalkylthiophene-polyvinylimidazolium adopts a lamellar structure with a lattice spacing of 3.3 nm. Four-probe d.c. conductivity measurements determined the de-doped electrical conductivity was 1.0 x 10(-2) S/cm. The results underscore the importance of the anion in controlling the polymerization of IL monomers.

Ionic liquid↗