Brooks, Arthur | Search NASA

DOE OSTI2023

Three-Dimensional Electromagnetic and Structural Analysis of Disruptions in the COMPASS Upgrade Vacuum Vessel

Structural analyses of disruptions and the electromagnetic (EM) analyses to support them typically use symmetry to produce a manageable model size. Nonaxisymmetric halo loads require larger analysis models. Here, in this paper, the results of transient EM analyses of halo strikes during a vertical displacement event are presented. The plasma motions and halo characteristics are prescribed based on analyses performed by the Institute of Plasma Physics of the Czech Republic. The time transient EM solution provides loads to a full three-dimensional transient dynamic analysis of the vacuum vessel. The responses to large lateral halo loads are altered and mitigated by the mode responses of the vessel. Dynamic load factors are computed for specific locations in the vessel and supports.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Virtual prototyping of liquid metal blanket performance in fusion pilot plant

Liquid metal blanket is a dominant design option for the next step fusion devices responsible for harvesting energy from fusion reaction, and simultaneously producing fuel for the same reaction through tritium breeding. Liquid metal blankets introduce additional complexity to the design due to fluid motion, fluid structure interaction, and magnetohydrodynamic (MHD) effects arising from the motion of the conducting fluid through the magnetic field. They are also directly affected by the plasma heat flux and neutronic fluence. PPPL is currently developing a virtual prototyping system for numerical analysis of the liquid metal blankets for future fusion devices. The system has a customized 3D computational fluid dynamics (CFD) code in its core, allowing MHD flow and conjugate heat transfer analysis in blankets fluids and solids. The code was successfully used before for dual coolant blanket analysis [A. Khodak et al., Fusion Eng. and Des. 137 (2018)]. Recently the same code was modified to allow verified simulation of MHD flows at high Hartmann numbers of several thousand typical for blanket applications. CFD code receives volumetric heat source distribution from the neutronic analysis based on MCNP code. In addition, direct tritium breeding simulation will be performed allowing optimization of the blanket performance. 2D axisymmetric version of neutronics code will be used for rapid optimization, with 3D version employed for detailed analysis. The surface heat distribution on the plasma facing wall will be defined by the software HEAT allowing 3D modeling of the heat flux based on the magnetic field distribution including gyro-orbit effects. Results of thermal analysis are imported into structural analysis code also included in the system. Finally, direct import of CAD geometry will be used for analyzing all components and as a result design option can be efficiently optimized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Stellarator Simplification using Permanent Magnets (PM4Stell)

This Report describes the design and prototyping of an array of rare-Earth permanent magnets to form a stellarator. This effort was motivated by the hypothesis that the usage of permanent magnets, rather than electromagnetic coils with complex geometry, could reduce the cost of stellarator construction and thereby make increase the feasibility of the stellarator as a technology for a fusion-based power plant. In this project, we have developed novel methods for specifying the positions, shapes, and polarizations of the magnets in the array, and have developed designs for mounting structures and tooling for assembly. We have also performed detailed finite-element modeling to qualify the accuracy of the magnetic field produced by the magnet array as designed, and to confirm that the structure can withstand the forces between the magnets. We have also developed techniques for measuring the magnetic field produced by the array once constructed, as well as for correcting errors in the field arising from misalignments and offsets within the tolerances for mounting and fabrication. Finally, we have constructed a tabletop prototype of a section of the array to qualify the concept for assembling and mounting magnets within the array.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Stellarator Simplification using Permanent Magnets (PM4Stell)

This Report describes the design and prototyping of an array of rare-Earth permanent magnets to form a stellarator. This effort was motivated by the hypothesis that the usage of permanent magnets, rather than electromagnetic coils with complex geometry, could reduce the cost of stellarator construction and thereby make increase the feasibility of the stellarator as a technology for a fusion-based power plant. In this project, we have developed novel methods for specifying the positions, shapes, and polarizations of the magnets in the array, and have developed designs for mounting structures and tooling for assembly. We have also performed detailed finite-element modeling to qualify the accuracy of the magnetic field produced by the magnet array as designed, and to confirm that the structure can withstand the forces between the magnets. We have also developed techniques for measuring the magnetic field produced by the array once constructed, as well as for correcting errors in the field arising from misalignments and offsets within the tolerances for mounting and fabrication. Finally, we have constructed a tabletop prototype of a section of the array to qualify the concept for assembling and mounting magnets within the array.

47 OTHER INSTRUMENTATION↗