CBETA permanent magnet production run
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Brooks, Stephen.
Explore the source record for details and available documents.
The wire segment in question travels in a straight line from position a to b and carries current I in the direction towards b . The magnetic field of this segment alone will not be Maxwellian because the current does not satisfy the continuity equation. However, the field sum of a loop of such wires will be. The integration will be performed along the entire 𝓏 axis (-$\infty$ to $\infty$).
This report provides detail on the magnet types and counts, measurement tuning process, schedule, and field quality of magnets needed for CBETA. The magnet production run was a success, producing 216 permanent magnets with good field quality within the deadline.
The radiation damage calculation proceeds via several stages to get from energy lost by the beam to the field degradation from radiation damage: • Beam energy lost → Specific radiation dose. This just divides the absorbed energy by the mass it was deposited in to convert from J to Gy=J/kg, or rad=0.01Gy. • Specific radiation dose → Magnetisation loss. This depends on the permanent magnet material grade as well as the magnetisation geometry (the “H” field). Magnetisation loss rates have been studied in the literature and this note will follow the formula. • Magnetisation loss → Field change in beam aperture. For uniform magnetisation loss, this is simply proportional (1% less magnetisation = 1% less field). For nonuniform demagnetisation, nonlinear fields errors are also introduced. As the magnetic material has mu_r ~= 1, in this note the H and M fields will be scaled by mu_0 to put them in units of Tesla, which allows easy comparison with B fields and the residual field Br.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
The data for measurement and survey of the CBETA Halbach magnets is stored on the “DISCOVERY” network computer at BNL Superconducting Magnet Division (SMD), on the network share called “C_Beta”. This serves as storage for the measurements, under systematic filenames, as well as generated reports and other relevant per-magnet documentation such as travellers.
The first CBETA magnet to be made using the production run of permanent magnet wedges is the BDH magnet, a “half length BD” to be placed at the start of the first girder of the FFAG return loop. This magnet has identifier number 2731 and is shown in the picture below while being prepared for measurement.
The CBETA project recently chose to use Halbach magnets to form the FFAG lattice. A first FFAG arc girder will be constructed on a short time-scale so a suitable lattice using Halbach magnets is required. This document gives the specification of the magnets as well as their placement and the optics of the cell as calculated using the Muon1 code, as these things are strongly coupled.
The Halbach magnet design produces magnetic field directly from magnetised blocks, without intervening iron to shape the field. This traditionally has made it difficult to get good field quality, as the field will be directly sensitive to the blocks’ positions, angles and magnetisation strength, the last of which can vary by of the order of 1% from the factory.
We will consider an idealised magnetostatics problem where the iron of the windowframe has µ r = ∞ so produces a perfect infinite family of image currents (or equivalently the transverse B field component is zero at the surface of the iron). Within the interior of the windowframe, we further assume that µ r = 1 i.e. µ = µ 0 and there is no magnetisation, M = 0 . Under these assumptions, Maxwell’s equations for the B field become: ∇ · B = 0, ∇ × B = µ 0 J , where J is the current density vector.
There are two types of magnet assembly, QF and BD. These share a common outer frame and also include the same windowframe corrector around them. The differences are only (a) the thickness of the NdFeB permanent magnet wedges, (b) the shape of the 3D printed mould fitting around the wedges inside the aluminium holder and (c) the length of the overall magnet. All assemblies are splittable in order to fit the vacuum pipe through them.
Abstract not provided.
Abstract not provided.
The transfer matrix of a drift space of length L is shown in the equation below: [$^x_{x^{\prime}}$] $(L)$ = [$^1_0$ $^L_1$][$^x_{x^{\prime}}$]$(0$), with $y$ and $y^{\prime}$ behaving behaving similarly. Writing the phase space vector as $s$ = [$^x_{x^{\prime}}$], it can be seen that under a linear mapping $s \mapsto Ms$. the matrix $\langle{ss^T}\rangle$, where the average is taken over a beam of particles, transforms as $\langle{ss^T}\rangle$ $\mapsto$ $\langle{Mss^TM^T}\rangle$ = $M\langle{ss^T}\rangle$, assuming all particles have the same transfer matrix $M$ (this is true if, for example, there is no momentum spread).
Abstract not provided.