Search NASA⌕ Search

Engineering topics

Brown, Michael A.

Publications and source records attributed to Brown, Michael A..

Automated Inspection of Criticality Control Overpacks for Surplus Plutonium Disposition: Qualification Update – 25313

In an effort to reduce the amount of nuclear waste in South Carolina, the Department of Energy (DOE) tasked the Savannah River Site (SRS) with diluting and disposing of the amount of plutonium in the state. This process involves the movement and shipment of over 100,000 criticality control overpacks (CCOs) throughout the project lifespan, lending itself to the use of automation to reduce worker radiation exposure and more efficiently utilize human capital. Due to the large scope, this overarching process was broken down into several different “automation projects” to be developed. The first opportunity pursued was the receipt and inspection of empty CCO drums coming into SRS, identified as Automation Project 1 (AP1), and is the focus of this paper. AP1 was developed to unpack incoming CCOs and inspect them for unwanted foreign objects and any damage to the drum or its contents. This process is accomplished by the combination of an automated guided vehicle (AGV) that delivers CCOs to a robotic arm which uses a suite of custom tools to disassemble a CCO, inspect the inside and outside of the CCO and its inner criticality control container (CCC), reassemble the CCC and CCO, and apply a tamper indicating device (TID) to the inspected drum. In past years, the robotic work cell had been developed in a small-scale testing facility for proof-of-concept. This year, major improvements were made to the robotic work cell to perform the process, including integration into the final facility where CCOs will be inspected. Other technical improvements include the implementation of sensor feedback and safety relays into the control system to allow the state of the work cell to be better tracked, and additional development of the TID application process to complete the robotic inspection. Further enhancements were made to the robotic vision processes and robot pathing, as well as development on a computer vision inspection process to detect inspection criteria anomalies in CCOs. In addition to developmental improvements, the work cell underwent a six-month testing period to ensure the project requirements were met. Results of this testing period demonstrate the work cell’s capability to meet project throughput goals at an acceptable level, successfully document the status of each CCO inspected, and reduce the toll on technical operations’ human power by two thirds. At the time of this paper, the work cell is capable of autonomously handling up to eight CCOs with an AGV, delivering CCOs to and from the robot work cell, and having a robotic arm perform a full receipt and inspection procedure on each CCO. Moving forward, repeatability will be improved so that these CCOs can be run back-to-back seamlessly, as well as improving the system to handle more significant edge cases and failure modes.

Spivey, Nicholas↗

Technetium-99M generator for enriched molybdenum

A method for separating a parent isotope from a daughter isotope is provided, the method comprising supplying irradiated target; dissolving the irradiated target; treating the dissolved irradiated target to a precipitation step to form a first solid phase of the parent isotope and a first liquid phase of the daughter isotope; filtering the first liquid phase of daughter isotope to create a first purified fraction of the daughter isotope to create a second solid phase of the parent isotope and a second liquid phase of the daughter isotope; and filtering the second liquid phase to create a second liquid fraction of the daughter isotope. The process can be repeated until the 99 Mo is exhausted and the enriched target material 98 Mo or 100 Mo can be easily re-used.

Brown, Michael A.↗

Simulation Studies of Electromagnetic Energy Absorption by Hydride Materials

This paper investigates the key parameters that contribute to electromagnetic (EM) energy absorption and heating of hydride materials which could be used to release hydrogen for use as a fuel. Our simulation study using COMSOL focuses on EM energy absorption and resulting temperature rise in a thin circular slab of hydride material using resonant dipole and loop antennas. Presented results delineate the effects of conductivity, relative permeability, antenna type and slab size on temperature rise when the distance and amount of RF power are kept fixed.

Brown, Michael A.↗

System and method for collecting and isolating radiosotopes

A method for obtaining 225 AC from 225 Ra having the steps of assembling a column having an inorganic stationary phase; priming the column to immobilize 226 Ra 225 Ra and natural decay products therefrom; immobilizing the 226 Ra, 225 Ra, 224 Ra, and natural decay products therefrom onto a stationary phase within the column; and eluting the column containing the 225 Ra with an aqueous sulfate solution to obtain a milking effluent that contains 225 AC. Also provided is a method for obtaining pure 225 AC from its isotope parents, the method comprising assembling a column having a stationary phase comprising an inorganic material; priming the column with the isotope parents to immobilize 225 Ac, and natural decay products of 225 AC; immobilizing the 225 Ac, and natural decay products therefrom onto the stationary phase within the column 226 Ra, 225 Ra, 224 Ra; and eluting the column containing the 225 AC to obtain an effluent that contains the isotope parents.

Brown, Michael A.↗

Automatic gas sorption apparatus and method

Automated apparatuses for use in examining gas sorption materials are described. Devices utilize a noncontact magnetic induction heating approach for controlling the temperature of tested materials. The apparatuses can be used to generate single or multiple isotherms simultaneously. The apparatuses can examine nanogram or microgram-scale quantities of materials of interest and can do so automatically and unattended. Pressure-composition isotherms can be provided through use of disclosed apparatuses in a period of a few hours.

Hunyadi Murph, Simona E.↗

Controlled release of hydrogen from composite nanoparticles

Multi-functional materials for use in reversible, high-capacity hydrogen separation and/or storage are described. Also described are systems incorporating the materials. The multi-functional materials combine a hydrogen-absorbing material with a high-efficiency and a non-contact energy-absorbing material in a composite nanoparticle. The non-contact energy-absorbing material include magnetic and/or plasmonic materials. The magnetic or plasmonic materials of the composite nanoparticles can provide localized heating to promote release of hydrogen from the hydrogen storage component of the composite nanoparticles.

Murph, Simona H.↗

Controlled release of hydrogen from composite nanoparticles

Multi-functional materials for use in reversible, high-capacity hydrogen separation and/or storage are described. Also described are systems incorporating the materials. The multi-functional materials combine a hydrogen absorbing material with a high-efficiency and anon-contact energy absorbing material in a composite nanoparticle. The non-contact energy absorbing material include magnetic and/or plasmonic materials. The magnetic or plasmonic materials of the composite nanoparticles can provide localized heating to promote release of hydrogen from the hydrogen storage component of the composite nanoparticles.

08 HYDROGEN↗

A Novel Method for Molybdenum-99/Technetium-99m Recovery via Anodic Carbonate Dissolution of Irradiated Low-Enriched Uranium Metal Foil

A new method is presented here for digesting irradiated low-enriched uranium foil targets in alkaline carbonate media to recover 99Mo. This method consists of the electrolytic dissolution of uranium foil in a sodium bicarbonate solution, followed by the precipitation of carbonate, base-insoluble fission products, activation products, and actinides with calcium oxide; most of the molybdenum, technetium, and iodine remain in solution. An electrochemical dissolver and mixing vessel were designed, fabricated, and tested for the processing of a full-sized irradiated foil under ambient pressure and elevated temperature. Over 92% of the fission-induced Mo-99 was recovered in a product solution that was compatible with an anion-exchange column for retaining molybdenum and iodine.

Brown, Michael A.↗

Display Sharing: An Alternative Paradigm

The current Johnson Space Center (JSC) Mission Control Center (MCC) Video Transport System (VTS) provides flight controllers and management the ability to meld raw video from various sources with telemetry to improve situational awareness. However, maintaining a separate infrastructure for video delivery and integration of video content with data adds significant complexity and cost to the system. When considering alternative architectures for a VTS, the current system's ability to share specific computer displays in their entirety to other locations, such as large projector systems, flight control rooms, and back supporting rooms throughout the facilities and centers must be incorporated into any new architecture. Internet Protocol (IP)-based systems also support video delivery and integration. IP-based systems generally have an advantage in terms of cost and maintainability. Although IP-based systems are versatile, the task of sharing a computer display from one workstation to another can be time consuming for an end-user and inconvenient to administer at a system level. The objective of this paper is to present a prototype display sharing enterprise solution. Display sharing is a system which delivers image sharing across the LAN while simultaneously managing bandwidth, supporting encryption, enabling recovery and resynchronization following a loss of signal, and, minimizing latency. Additional critical elements will include image scaling support, multi -sharing, ease of initial integration and configuration, integration with desktop window managers, collaboration tools, host and recipient controls. This goal of this paper is to summarize the various elements of an IP-based display sharing system that can be used in today's control center environment.

Brown, Michael A.↗

Internet Protocol Display Sharing Solution for Mission Control Center Video System

With the advent of broadcast television as a constant source of information throughout the NASA manned space flight Mission Control Center (MCC) at the Johnson Space Center (JSC), the current Video Transport System (VTS) characteristics provides the ability to visually enhance real-time applications as a broadcast channel that decision making flight controllers come to rely on, but can be difficult to maintain and costly. The Operations Technology Facility (OTF) of the Mission Operations Facility Division (MOFD) has been tasked to provide insight to new innovative technological solutions for the MCC environment focusing on alternative architectures for a VTS. New technology will be provided to enable sharing of all imagery from one specific computer display, better known as Display Sharing (DS), to other computer displays and display systems such as; large projector systems, flight control rooms, and back supporting rooms throughout the facilities and other offsite centers using IP networks. It has been stated that Internet Protocol (IP) applications are easily readied to substitute for the current visual architecture, but quality and speed may need to be forfeited for reducing cost and maintainability. Although the IP infrastructure can support many technologies, the simple task of sharing ones computer display can be rather clumsy and difficult to configure and manage to the many operators and products. The DS process shall invest in collectively automating the sharing of images while focusing on such characteristics as; managing bandwidth, encrypting security measures, synchronizing disconnections from loss of signal / loss of acquisitions, performance latency, and provide functions like, scalability, multi-sharing, ease of initial integration / sustained configuration, integration with video adjustments packages, collaborative tools, host / recipient controllability, and the utmost paramount priority, an enterprise solution that provides ownership to the whole process, while maintaining the integrity of the latest technological displayed image devices. This study will provide insights to the many possibilities that can be filtered down to a harmoniously responsive product that can be used in today's MCC environment.

Brown, Michael A.↗