Search NASA⌕ Search

Engineering topics

Brown, Scott A.

Publications and source records attributed to Brown, Scott A..

Numerical simulation of parametric resonance in point absorbers using a simplified model

Abstract Parametric resonance is a non‐linear phenomenon in which a system can oscillate at a frequency different from its exciting frequency. Some wave energy converters are prone to this phenomenon, which is usually detrimental to their performance. Here, a computationally efficient way of simulating parametric resonance in point absorbers is presented. The model is based on linear potential theory, so the wave forces are evaluated at the mean position of the body. However, the first‐order variation of the body's centres of gravity and buoyancy is taken into account. This gives essentially the same result as a more rigorous approach of keeping terms in the equation of motion up to second order in the body motions. The only difference from a linear model is the presence of non‐zero off‐diagonal elements in the mass matrix. The model is benchmarked against state‐of‐the‐art non‐linear Froude–Krylov and computational fluid dynamics models for free decay, regular wave, and focused wave group cases. It is shown that the simplified model is able to simulate parametric resonance in pitch to a reasonable accuracy even though no non‐linear wave forces are included. The simulation speed on a standard computer is up to two orders of magnitude faster than real time.

16 TIDAL AND WAVE POWER↗

Focused wave interactions with floating structures: a blind comparative study

The paper presents results from the Collaborative Computational Project in Wave Structure Interaction (CCP-WSI) Blind Test Series 2. Without prior access to the physical data, participants, with numerical methods ranging from low-fidelity linear models to fully non-linear Navier-Stokes (NS) solvers, simulate the interaction between focused wave events and two separate, taut-moored, floating structures: a hemispherical-bottomed cylinder and a cylinder with a moonpool. The ‘blind’ numerical predictions for heave, surge, pitch and mooring load, are compared against physical measurements. Dynamic time warping is used to quantify the predictive capability of participating methods. In general, NS solvers and hybrid methods give more accurate predictions; however, heave amplitude is predicted reasonably well by all methods; and a WEC-Sim implementation, with CFD-informed viscous terms, demonstrates comparable predictive capability to even the stronger NS solvers. Large variations in the solutions are observed (even among similar methods), highlighting a need for standardisation in the numerical modelling of WSI problems.

42 ENGINEERING↗

Methodology for Valuing Resilience to Severe Events for Department of Energy Sites

This study outlines an approach that operators of U.S. Department of Energy sites can use to value resilience. Qualitative screening and assessments often effectively identify vulnerabilities and measures that would enhance resilience. However, the implementation of these measures may be limited by a lack of a quantifiable cost-benefit analysis that compares action to inaction. The method presented here is intended to help overcome this barrier by detailing how DOE sites can quantify the costs and benefits of site resilience measures, and to compare that to the value of inaction. The approach mirrors common vulnerability assessment and resilience planning methods following five key steps (e.g., establish the baseline, assess vulnerability and risk, develop the resilience action plan), and provides detailed guidance on methods for quantification within each step. The five-step methodology was implemented in a case study of the U.S. Department of Energy’s Hanford Site, which demonstrated the value of two resilience measures aimed at helping the site to avoid lost work hours due to expected increases in the number of high heat days.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Army Net Zero. Water Balance and Roadmap Programmatic Summary

In 2011, the Department of the Army created the net zero initiative to advance the sustainability of the Army by managing natural resources with the goal of establishing net zero installations. The Net Zero concept is founded upon the idea of consuming natural resources responsibly based upon knowledge of long-term resource availability, creating a sustainable environment to support the installation’s long-term mission. The Army is pursuing net zero programs in energy, water, and waste. To kick off the net zero initiative, the Army selected installations to demonstrate the concept of net zero energy, water, and waste. This document is an overview of assessments performed at the eight net zero water installations. Each assessment included a water balance and a roadmap intended to provide pilot installations with a strategic approach to achieve net zero goals.

54 ENVIRONMENTAL SCIENCES↗

Review of Residential Low-Load HVAC Systems

In support of the U.S. Department of Energy’s (DOE’s) Building America Program, Pacific Northwest National Laboratory (PNNL) conducted an investigation to inventory commercially available HVAC technologies that are being installed in low-load homes. The first step in this investigation was to conduct a review of published literature to identify low-load HVAC technologies available in the United States and abroad, and document the findings of existing case studies that have evaluated the performance of the identified technologies. This report presents the findings of the literature review, identifies gaps in the literature or technical understanding that must be addressed before low-load HVAC technologies can be fully evaluated, and introduces PNNL’s planned research and analysis for this project to address identified gaps and potential future work on residential low-load HVAC systems.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗