Search NASA⌕ Search

Engineering topics

Brown, William C.

Publications and source records attributed to Brown, William C..

A transportronic solution to the problem of interorbital transportation

An all-electronic transportation system described by the term 'transportronics' is examined as a means of solving the current problem of the high cost of transporting material from low-Earth orbit (LEO) to geostationary orbit (GEO). In this transportation system, low cost electric energy at the surface of the Earth is efficiently converted into microwave power which is then efficiently formed into a narrow beam which is kept incident upon the orbital transfer vehicles (OTV's) by electronic tracking. The incident beam is efficiently captured and converted into DC power by a device which has a very high ratio of DC power output to its mass. Because the mass of the electric thruster is also low, the resulting acceleration is unprecedented for electric-propelled vehicles. However, the performance of the system in terms of transit times from LEO to GEO is penalized by the short time of contact between the beam and the vehicle in low-Earth orbits. This makes it necessary to place the Earth based transmitters and the vehicles in the equatorial plane thus introducing many geopolitical factors. Technically, however, such a system as described in the report may out-perform any other approach to transportation in the LEO to GEO regime. The report describes and analyzes all portions of the beamed microwave power transmission system in considerable detail. An economic analysis of the operating and capital costs is made with the aid of a reference system capable of placing about 130,000 kilograms of payload into GEO each year. More mature states of the system are then examined, to a level in which 60,000 metric tons per year could be placed into GEO.

Brown, William C.↗

Beamed microwave power transmission and its application to space

The general principles and special components of beamed microwave power transmission systems are outlined and their application to the space program are discussed. The beamed system is defined as starting with a dc source of power at the transmitting end, converting it to a microwave beam for transmission through space, and ending with the dc power output at the receiving end. An experimentally measured and certified dc-to-dc efficiency of 54 percent has been achieved, using this definition. The application discussed is that of a LEO to GEO transportation system that depends upon vehicles propelled by electric thrusters whose power is supplied by a microwave beam originating at the earth's surface. The advantages of the all-electronic system over a chemically propelled system are enumerated. The principles of space propulsion, particularly as they relate to electric propulsion, are outlined. Key components of the system and environmental considerations are discussed.

Brown, William C.↗

History and status of beamed power technology and applications at 2.45 Gigahertz

Various applications of beamed power technology are discussed. An experimental microwave powered helicopter, rectenna technology, the use of the Solar Power Satellite to beam energy to Earth via microwaves, the use of cyclotron resonance devices, microwave powered airships, and electric propulsion are discussed.

Brown, William C.↗

Status of beamed power transmission technology and applications at 2.45 gigahertz

Demonstrations and unique components of the 2.45 GHz beamed power transmission technology are reviewed. Attention is given to the following projects and developments: a microwave power helicopter demonstration; certification of overall dc to dc efficiency of 54 percent in the laboratory; demonstration of the transmission of significant amounts of power over significant distances; the solar power satellite and beamed power transmission; the Canadian SHARP program; space applications; an equatorially based beam power transmission system; an all-electronic LEO to GEO transportation system; and an orbiting industrial park system.

Brown, William C.↗

Rectenna Technology Program: Ultra light 2.45 GHz rectenna 20 GHz rectenna

The program had two general objectives. The first objective was to develop the two plane rectenna format for space application at 2.45 GHz. The resultant foreplane was a thin-film, etched-circuit format fabricated from a laminate composed of 2 mil Kapton F sandwiched between sheets of 1 oz copper. The thin-film foreplane contains half wave dipoles, filter circuits, rectifying Schottky diode, and dc bussing lead. It weighs 160 grams per square meter. Efficiency and dc power output density were measured at 85% and 1 kw/sq m, respectively. Special testing techniques to measure temperature of circuit and diode without perturbing microwave operation using the fluoroptic thermometer were developed. A second objective was to investigate rectenna technology for use at 20 GHz and higher frequencies. Several fabrication formats including the thin-film scaled from 2.45 GHz, ceramic substrate and silk-screening, and monolithic were investigated, with the conclusion that the monolithic approach was the best. A preliminary design of the monolithic rectenna structure and the integrated Schottky diode were made.

Brown, William C.↗