Engineering topics
Browning, Nigel
Publications and source records attributed to Browning, Nigel.
Enhanced Interface-Driven Perpendicular Magnetic Anisotropy by Symmetry Control in Oxide Superlattices
Perpendicular magnetic anisotropy (PMA) has recently been shown to emerge at interfaces of 3d and 5d transition-metal oxides (TMOs). However, strategies to systematically stabilize such interface-driven PMA still remains elusive, hindering further applications of this design approach. Here, tuning crystal symmetry is shown to be an effective means to engineer this interfacial phenomenon. The evolution of PMA strength as a function of ferromagnetic oxide thickness quantitatively reveals the competition between volume- and interface-specific contributions that determine the magnetic anisotropy. By applying different degrees of epitaxial strain, the relative contributions to PMA are modulated, clearly revealing their correlations with crystal symmetries. To be more specific, the volume anisotropy energy is found to be correlated with the tetragonal distortion of the ferromagnetic layer, while the interface anisotropy energy is mainly modulated by the octahedral tilting at the interface. With these insights, superlattices with enhanced interface-driven PMA and higher Curie temperature are realized. These findings reveal a route to engineering interface-driven PMA and associated magnetic phenomena in TMO heterostructures for future spintronic applications.
Data for EMSL Project 48164 from March 2020
Explore the source record for details and available documents.
Data for EMSL Project 48681 from March 2020
Explore the source record for details and available documents.
Data for EMSL Project 49277 from March 2020
Explore the source record for details and available documents.
INTEGRATING SOFTWARE/HARDWARE APPROACHES FOR COMPRESSIVE SENSING TO ENHANCE THE PERFORMANCE OF ULTRA-HIGH-SPEED ELECTRON CAMERAS
Explore the source record for details and available documents.
Optically Stimulated Luminescence Based Optical Data Storage
We design, built, and demonstrated a photocathode based pulsed electron system to produce optically stimulated luminescence (OSL) for next generation data storage. We successfully demonstrated 10ps pulses of up to 10 6 electrons and used those pulses to form OSL patterns in LiF without causing mechanical damage. By adjusting the accelerating voltage, we were able to vary the ratio of red to green optical emission, demonstrating a potential path for increasing storage density using orthogonal encoding. We also modeled a new approach to reading data that exploits the unique nature of OSL based data storage where the writing and reading processes have different size scales. Based on the technical demonstrations, we developed a roadmap to increase the storage density beyond 50TB using a standard 5.25” optical storage disc.
In-Situ Electrochemical Transmission Electron Microscopy for Battery Research
Explore the source record for details and available documents.
Segregation of Mn2+ Dopants as Intersticials in SrTiO3 Grain Boundaries
Explore the source record for details and available documents.
Demonstration of an Electrochemical Liquid Cell for Operando Transmission Electron Microscopy Observation of the Lithiation/Delithiation Behavior of Si Nanowire Battery Anodes
Explore the source record for details and available documents.
Antisite Defects In La0.7Sr0.3MnO3 and La0.7Sr0.3FeO3
Complex oxide thin films and superlattices with the perovskite ABO3 structure have been found to possess novel functional properties. Here, we present our discovery of antisite defects, La ions in Fe(Mn) sites (denoted as LaB), in a La0.7Sr0.3MnO3/La0.7Sr0.3FeO3 superlattice. The antisite defect was directly characterized by atomic resolution Z-contrast imaging and the composition and electronic structure was analyzed by electron energy loss spectroscopy in an aberration-corrected scanning transmission electron microscope. Density functional theory was used to calculate the formation energy, showing that the formation of the detected antisite defects is a consequence of the slightly reducing conditions during sample growth.
Probing Electronic Structure at Magnetoelectric Interfaces
No abstract prepared.
Radiation Damage in Nuclear Fuel for Advanced Burner Reactors: Modeling and Experimental Validation
The consortium has completed its existence and we are here highlighting work and accomplishments. As outlined in the proposal, the objective of the work was to advance the theoretical understanding of advanced nuclear fuel materials (oxides) toward a comprehensive modeling strategy that incorporates the different relevant scales involved in radiation damage in oxide fuels. Approaching this we set out to investigate and develop a set of directions: 1) Fission fragment and ion trajectory studies through advanced molecular dynamics methods that allow for statistical multi-scale simulations. This work also includes an investigation of appropriate interatomic force fields useful for the energetic multi-scale phenomena of high energy collisions; 2) Studies of defect and gas bubble formation through electronic structure and Monte Carlo simulations; and 3) an experimental component for the characterization of materials such that comparisons can be obtained between theory and experiment.
Studying Linked Interfacial Structure and Chemistry in Radiation Resistant Alloys.
Abstract not provided.
Towards an integrated materials characterization toolbox
The material characterization toolbox has recently experienced a number of parallel revolutionary advances, foreshadowing a time in the near future when material scientists can quantify material structure evolution across spatial and temporal space simultaneously. This will provide insight to reaction dynamics in four-dimensions, spanning multiple orders of magnitude in both temporal and spatial space. This study presents the authors’ viewpoint on the material characterization field, reviewing its recent past, evaluating its present capabilities, and proposing directions for its future development. Electron microscopy; atom probe tomography; x-ray, neutron and electron tomography; serial sectioning tomography; and diffraction-based analysis methods are reviewed, and opportunities for their future development are highlighted. Advances in surface probemicroscopy have been reviewed recently and, therefore, are not included [D.A.Bonnell et al.: Rev.Modern Phys. in Review]. In this study particular attention is paid to studies that have pioneered the synergetic use of multiple techniques to provide complementary views of a single structure or process; several of these studies represent the stateof- the-art in characterization and suggest a trajectory for the continued development of the field. Based on this review, a set of grand challenges for characterization science is identified, including suggestions for instrumentation advances, scientific problems in microstructure analysis, and complex structure evolution problems involving material damage. The future of microstructural characterization is proposed to be one not only where individual techniques are pushed to their limits, but where the community devises strategies of technique synergy to address complex multiscale problems in materials science and engineering.
Decomposition Pathway of Ammonia Borane on the Surface of nano-BN
Ammonia borane (AB) is under significant investigation as a possible hydrogen storage material. While many chemical additives have been demonstrated to have a significant positive effect on hydrogen release from ammonia borane, many provide additional complications in the regeneration cycle. Mechanically alloyed hexagonal BN (nano-BN) has been shown to facilitate the release of hydrogen from AB at lower temperature, with minimal induction time, less exothermically, and inert nano-BN may be easily removed during any regeneration of the spent AB. The samples were prepared by mechanically alloying AB with nano-BN. Raman spectroscopy indicates that the AB:nano-BN samples are physical mixtures of AB and h-BN. The release of hydrogen from AB:nano-BN mixtures as well as the decomposition products were characterized by 11 B magic angle spinning (MAS) solid state NMR, TGA/DSC/MS with 15 N labeled AB, and solution 11 B NMR spectroscopy. The 11 B MAS solid state NMR spectrum shows that diammonate of diborane (DADB) is present in the mechanically alloyed mixture, which drastically shortens the induction period for hydrogen release from AB. Analysis of the TGA/DSC/MS spectra using 15 N labeled AB shows that all the borazine (BZ) produced in the reaction comes from AB and that increasing nano-BN surface area results in increased amounts of BZ. However, under high temperature, 150°C, isothermal conditions, the amount of BZ released was the same as for neat AB. High resolution transmission electron microscopy (HRTEM), selected area diffraction (SAD), and electron energy loss spectroscopy (EELS) of the initial and final nano-BN additive provide evidence for crystallinity loss but not significant chemical changes. The higher concentration of BZ observed for low temperature dehydrogenation of AB:nano-BN mixtures versus neat AB is attributed to a surface interaction that favors the formation of precursors which ultimately result in BZ. This pathway can be avoided through isothermal heating at temperatures >150°C.