Engineering topics

Bryan, Coleman J.

Publications and source records attributed to Bryan, Coleman J..

5 records

NASA NTRS1992

Material selection and evaluation aimed at resolving deficiencies of a space technology material

NASA-Kennedy Space Center propellant handlers' visors are undergoing conversion from Plexiglass G to a Surlyn 8920-based material; various Surlyn compositions are here subjected to a battery of environmental and mechanical-properties tests under the relevant conditions. Specially-molded Surlyn samples have exhibited much higher impact strengths than either Plexiglass G or Lexan, and passed the ANSI weight-drop test. DSC results show that Surlyn and Plexiglass G exhibit strikingly different thermal transitions.

Ray, Asit K.↗

NASA NTRS1991

Corrosion-protective coatings from electrically conducting polymers

In a joint effort between NASA Kennedy and LANL, electrically conductive polymer coatings were developed as corrosion protective coatings for metal surfaces. At NASA Kennedy, the launch environment consist of marine, severe solar, and intermittent high acid and/or elevated temperature conditions. Electrically conductive polymer coatings were developed which impart corrosion resistance to mild steel when exposed to saline and acidic environments. Such coatings also seem to promote corrosion resistance in areas of mild steel where scratches exist in the protective coating. Such coatings appear promising for many commercial applications.

Thompson, Karen Gebert↗

NASA NTRS1989

The oxygen sensitivity/compatibility ranking of several materials by different test methods

Eleven materials were evaluated for oxygen compatibility using the following test methods: heat of combustion (ASTM D 2015), liquid oxygen impact (ASTM D 2512), pneumatic impact (ASTM G 74), gaseous mechanical impact (ASTM G 86), autogenous ignition temperature by pressurized differential scanning calorimeter, and the determination of the 50 percent reaction level in liquid oxygen using silicon carbide as a reaction enhancer. The eleven materials evaluated were: Teflon TFE, Vespel SP-21, Krytox 240AC, Viton PLV5010B, Fluorel E2160, Kel F 81, Fluorogold, Fluorogreen E-600, Rulon A, Garlock 8573, nylon 6/6.

Lockhart, Billy J.↗

NASA NTRS1989

Ignition of PTFE-lined flexible hoses by rapid pressurization with oxygen

A high-volume pneumatic-impact system has been used to test PTFE-lined stainless steel braided hoses, in order to characterize the roles played in the mechanism of oxygen-induced ignition by impact pressure, pressurization rate, and upstream and downstream volumes of the hose. Ignitions are noted to have occurred at impact pressures well below the working pressure of the hoses, as well as at pressurization rates easily obtainable through manual operation of valves. The use of stainless steel hardlines downstream of the hose prevented ignitions at all pressures and pressurization rates; internal observations have shown evidence of shock ionization in the oxygen prior to ignition.

Janoff, Dwight↗

NASA NTRS1988

Procedure for the selection of materials for use in oxygen systems at the John F. Kennedy Space Center

This paper describes tests used at the John F. Kennedy Space Center (KSC) in the material selection procedure for evaluating materials suitable for use in oxygen systems. Special attention is given to the basic selection criteria for materials used in oxygen enriched environments. The flow chart for the material selection procedure is presented, and information that must be supplied by vendors requesting batch/lot certification support from KSC is given.

Bryan, Coleman J.↗