Search NASA⌕ Search

Engineering topics

Bu, Lintao

Publications and source records attributed to Bu, Lintao.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Dataset_for_Conserved_macromolecular_architecture_of_Poplar_secondary_cell_walls_revealed_by_ssNMR_and_atomistic_modeling

This dataset contains solid-state 13C NMR data and atomistic molecular dynamics simulation files supporting the study of nanoscale secondary cell wall architecture across 13 genetically diverse Populus trichocarpa genotypes grown under uniform greenhouse conditions in 13C-enriched CO2 atmospheres (~89% 13C enrichment).The dataset contains two collections of solid-state 13C NMR data. (1) 200 MHz data (Bruker Avance III HD, 4 mm HX probe, 10 kHz MAS): raw Bruker TopSpin experiment folders and DMFIT-exported ascii spectra for selective and non-selective 1D 13C-13C spin diffusion experiments (3000 ms mixing) used to quantify inter-polymer spatial proximities, and short-mixing (1 ms) reference spectra used for polymeric abundance quantification by spectral deconvolution. (2) 600 MHz data (Bruker Avance III, 1.6 mm PhoenixNMR HXY probe, 30 kHz MAS): raw Bruker TopSpin experiment folders containing 2D CORD, 2D CP-INADEQUATE, and 13C/1H relaxation (T1, T1rho) experiments for all 13 genotypes, with processed Excel workbooks per experiment type. Molecular dynamics simulation code, coordinate files, and analysis scripts (NAMD/CHARMM/Python) for six atomistic cell wall models are included. Summarized ssNMR data are compiled into a single excel file and subjected to statistical analysis. Multivariate analysis code (PCA, Pearson correlation) and summary data are provided as excel worksheets and Jupyter notebooks (Python 3).

09 BIOMASS FUELS↗
DOE OSTI2025

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗
DOE OSTI2025

Investigating the Effect of Water on the Mechanical Properties of Cellulose from Multiscale Molecular Dynamics Simulations

Classical molecular dynamics (MD) simulations provide insight into the structure and physicochemical properties of materials with atomic resolution. However, the length and time scales accessible to atomistic MD are orders of magnitude smaller than many relevant processes such as the response of a bulk material to experimentally accessible strain rates, which presents challenges when comparing models to experimental measurements. Bottom-up coarse-graining provides a means for systematically mapping atomistic information to lower resolution models to increase the length and time scales achievable by simulation. Cellulose is an abundant carbohydrate biopolymer with applications to many fields of research, such as materials science and renewable energy, due to its desirable mechanical properties and viability for conversion into biofuel. The effect of moisture content on the Young's modulus of cellulose is of special interest due to its native environment often being in the hydrated secondary plant cell wall and the grinding energy requirements for biomass feedstock preprocessing. The current work investigates the effects of water solvent on the Young's modulus of cellulose calculated from coarse-grained MD mechanical stress simulations. The coarse-grained model was parametrized from atomistic MD calculations of cellulose-cellulose potentials of mean force using umbrella sampling techniques under vacuum and solvated conditions. The Young's moduli of the coarse-grained cellulose assemblies parametrized from cellulose in vacuum or solvated in water were computed via mechanical stress simulations to highlight the importance of capturing solvent interactions for modeling the mechanical behavior of cellulose.

BASIC BIOLOGICAL SCIENCES,RADIATION PROTECTION AND↗
DOE OSTI2024

Atomistic, macromolecular model of the Populus secondary cell wall informed by solid-state NMR

Plant secondary cell walls (SCWs) are composed of a heterogeneous interplay of three major biopolymers: cellulose, hemicelluloses, and lignin. Details regarding specific intermolecular interactions and higher-order architecture of the SCW superstructure remain ambiguous. Here, we use solid-state nuclear magnetic resonance (ssNMR) measurements to infer refined details about the structural configuration, intermolecular interactions, and relative proximity of all three major biopolymers within air-dried Populus wood. To enhance the utility of these findings and enable evaluation of hypotheses in a physics-based environment in silico, the NMR observables are articulated into an atomistic, macromolecular model for biopolymer assemblies within the plant SCW. Through molecular dynamics simulation, we quantitatively evaluate several variations of atomistic models to determine structural details that are corroborated by ssNMR measurements.

09 BIOMASS FUELS↗
DOE OSTI2023

Diffusion in intact secondary cell wall models of plants at different equilibrium moisture content

Secondary plant cell walls are composed of carbohydrate and lignin polymers, and collectively represent a significant renewable resource. Leveraging these resources depends in part on a mechanistic understanding for diffusive processes within plant cell walls. Common wood protection treatments and biomass conversion processes to create biorefinery feedstocks feature ion or solvent diffusion within the cell wall. X-ray fluorescence microscopy experiments have determined that ionic diffusion rates are dependent on cell wall hydration as well as the ionic species through non-linear relationships. In this work, we use classical molecular dynamics simulations to map the diffusion behavior of different plant cell wall components (cellulose, hemicellulose, lignin), ions (Na + , K + , Cu2 + , Cl - ) and water within a model for an intact plant cell wall at various hydration states (3-30 wt% water). From these simulations, we analyze the contacts between different plant cell wall components with each other and their interaction with the ions. Generally, diffusion increases with increasing hydration, with lignin and hemicellulose components increasing diffusion by an order of magnitude over the tested hydration range. Ion diffusion depends on charge. Positively charged cations preferentially interact with hemicellulose components, which include negatively charged carboxylates. As a result, positive ions diffuse more slowly than negatively charged ions. Measured diffusion coefficients are largely observed to best fit piecewise linear trends, with an inflection point between 10 and 15% hydration. These observations shed light onto the molecular mechanisms for diffusive processes within secondary plant cell walls at atomic resolution.

09 BIOMASS FUELS↗
DOE OSTI2022

Mass Transport Limitations and Kinetic Consequences of Corn Stover Deacetylation

Alkaline pretreatment of herbaceous feedstocks such as corn stover prior to mechanical refining and enzymatic saccharification improves downstream sugar yields by removing acetyl moieties from hemicellulose. However, the relationship between transport phenomena and deacetylation kinetics is virtually unknown for such feedstocks and this pretreatment process. Here, we report the development of an experimentally validated reaction–diffusion model for the deacetylation of corn stover. A tissue-specific transport model is used to estimate transport-independent kinetic rate constants for the reactive extraction of acetate, hemicellulose and lignin from corn stover under representative alkaline conditions (5–7 g L -1 NaOH, 10 wt% solids loadings) and at low to mild temperatures (4–70°C) selected to attenuate individual component extraction rates under differential kinetic regimes. The underlying transport model is based on microstructural characteristics of corn stover derived from statistically meaningful geometric particle and pore measurements. These physical descriptors are incorporated into distinct particle models of the three major anatomical fractions (cobs, husks and stalks) alongside an unsorted, aggregate corn stover particle, capturing average Feret lengths of 917–1239 μm and length-to-width aspect ratios of 1.8–2.9 for this highly heterogeneous feedstock. Individual reaction–diffusion models and their resulting particle model ensembles are used to validate and predict anatomically-specific and bulk feedstock performance under kinetic-controlled vs. diffusion-controlled regimes. In general, deacetylation kinetics and mass transfer processes are predicted to compete on similar time and length scales, emphasizing the significance of intraparticle transport phenomena. Critically, we predict that typical corn stover particles as small as ~2.3 mm in length are entirely diffusion-limited for acetate extraction, with experimental effectiveness factors calculated to be 0.50 for such processes. Debilitatingly low effectiveness factors of 0.021–0.054 are uncovered for cobs—implying that intraparticle mass transfer resistances may impair observable kinetic measurements of this anatomical fraction by up to 98%. These first-reported quantitative maps of reaction vs. diffusion control link fundamental insights into corn stover anatomy, biopolymer composition, practical size reduction thresholds and their kinetic consequences. These results offer a guidepost for industrial deacetylation reactor design, scale-up and feedstock selection, further establishing deacetylation as a viable biorefinery pretreatment for the conversion of lignocellulosics into value-added fuels and chemicals.

09 BIOMASS FUELS↗
DOE OSTI2021

Pretreatment with Sodium Methyl Mercaptide Increases Carbohydrate Yield during Kraft Pulping

Kraft pulping is the predominant technology in the pulp and paper industry for removing lignin from wood carbohydrates to produce paper, board, packaging, tissue, and specialty cellulose. However, the kraft process is energy intensive and expensive, and its yield is limited by the degradation of carbohydrates. Pretreatment can increase carbohydrate yield by limiting degradation via primary peeling of reducing end groups. However, protection of galactoglucomannan (GGM), the primary hemicellulose component of softwood, is minimal when conventional pretreatments are used. Here, we investigated the effectiveness of sodium methyl mercaptide pretreatment on southern pine wood chips under a range of experimental conditions. We found that pretreatment of biomass with 4.38% sodium methyl mercaptide at pH 12 and 105 °C for 60 min provided small but significant increases in xylan and cellulose yields relative to control conditions, but preservation of GGM was minimal. Furthermore, to provide insight into molecular-scale details of primary peeling, pretreatment, and alkaline hydrolysis, we performed classical molecular dynamics (MD) simulations under selected process conditions and quantum mechanical (QM) calculations of selected reactions. MD simulations showed that C1 of the GGM reducing end is more readily accessible by HO – and CH 3 S – ions than in cellulose. The free energy barrier for peeling calculated with QM is lower for GGM than for cellulose, indicating increased susceptibility to peeling. In addition, we found that GGM may be more susceptible to internal chain cleavage than cellulose. Thus, even though reducing end groups may be protected initially through pretreatment, new unprotected reducing end groups may be generated through alkaline hydrolysis. Taken together, these findings show the promise of methyl mercaptide as a pretreatment technology for cellulose retention and also provide molecular insight for improving its effectiveness toward GGM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Oxidation and pyrolysis of methyl propyl ether

The ignition, oxidation, and pyrolysis chemistry of methyl propyl ether (MPE) was probed experimentally at several different conditions, and a comprehensive chemical kinetic model was constructed to help understand the observations, with many of the key parameters computed using quantum chemistry and transition state theory. Experiments were carried out in a shock tube measuring time variation of CO concentrations, in a flow tube measuring product concentrations, and in a rapid compression machine (RCM) measuring ignition delay times. The detailed reaction mechanism was constructed using the Reaction Mechanism Generator software. Sensitivity and flux analyses were used to identify key rate and thermochemical parameters, which were then computed using quantum chemistry to improve the mechanism. Validation of the final model against the 1-20 bar 600-1500 K experimental data is presented with a discussion of the kinetics. The model is in excellent agreement with most of the shock tube and RCM data. Strong non-monotonic variation in conversion and product distribution is observed in the flow-tube experiments as the temperature is increased, and unusually strong pressure dependence and significant heat release during the compression stroke is observed in the RCM experiments. These observations are largely explained by a close competition between radical decomposition and addition to O2 at different sites in MPE; this causes small shifts in conditions to lead to big shifts in the dominant reaction pathways. The validated mechanism was used to study the chemistry occurring during ignition in a diesel engine, simulated using Ignition Quality Test (IQT) conditions. At the IQT conditions, where the MPE concentration is higher, bimolecular reactions of peroxy radicals are much more important than in the RCM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Advances in Multiscale Modeling of Lignocellulosic Biomass

Applications and associated processing technologies of lignocellulosic biomass are becoming more important as we endeavor to meet societal demand for fuels, chemicals, and materials from renewable resources. Meanwhile, the rapidly expanding availability and capabilities of high-performance computing present an unprecedented opportunity to accelerate development of technologies surrounding lignocellulose utilization. In order to realize this potential, suitable modeling frameworks must be constructed that effectively capture the multiscale complexity and tremendous variety exhibited by lignocellulosic materials. In our assessment of previous endeavors towards this goal, several important shortcomings have been identified: (1) the lack of multiscale integration strategies that capture emergent properties and behaviors spanning different length scales, and (2) the inability of many modeling approaches to effectively capture the variability and diversity of lignocellulose that arise from both natural and process-induced sources. In this perspective, we survey previous modeling approaches for lignocellulose and simulations processes involving its chemical and mechanical transformation, and suggest opportunities for future development to enhance the utility of computational tools to address barriers to widespread adoption of a renewable bioeconomy.

09 BIOMASS FUELS↗
DOE OSTI2020

Low Temperature Oxidation of Methylpropyl Ether

Ethers are potential high-performance fuels that can be produced from renewable carbon sources such as biomass, but their combustion properties are not clearly understood. The cetane numbers (CN) for ethers, a measure of autoignition tendency, can range from less than 10 to greater than 100, and predictive tools based upon the molecular structures are desirable in order to focus fuel development research. In this study, we used molecular modeling, chemical kinetic modeling, and experimental measurements to understand the important reactions that lead to the autoignition of methylpropyl ether (MPE), a model for ethers containing alkyl chains long enough for intramolecular hydrogen transfer. These reactions are known to be important in the autoignition of alkanes and ethers and we propose to investigate the relationship between alkyl and ether reaction pathways. A reaction mechanism for MPE was created using MIT's Reaction Mechanism Generator (RMG) and G4 quantum calculation results and models were tested using the ChemKin Pro suite of software. Results from atmospheric pressure, flow tube reactor experiments and rapid compression machine (RCM) experiments were used to test the kinetic model and suggest refinements.

33 ADVANCED PROPULSION SYSTEMS↗