Engineering topics
Publications and source records attributed to Bucciarelli, B..
Preliminary work carried out with the aim of reducing the Guide Star Catalog (GSC2) measurements of the Palomar 2 plates with the Tycho catalog for a 625 sq deg test field centered on the North Galactic Pole, is reported on and the results are presented. The emphasis was on the photometric calibrations.
An expansion of the plate overlap method of astrometric data reduction to a single plate has been proposed and successfully tested. Each plate is (artificially) divided into sub-plates which can then be overlapped. This reduces the area of a 'plate' over which a plate model needs to accurately represent the relationship between measured coordinates and standard coordinates. Application is made to non-astrographic plates such as Schmidt plates and to wide-field astrographic plates. Indeed, the method is completely general and can be applied to any type of recording media.
Progress in the construction of the fundamental catalogs allows one to ask the following questions: 'Now that we have the FK5 with which to measure by, how good was the FK4? The FK3? How realistic were the error estimates they gave for their equatorial coordinates and their proper motions? Have their residual systematic differences continued to decrease in amplitude?' and so forth. Similar questions could be asked of the GC and the N30, and a companion paper will similarly analyze them. Finally, the identical series of questions could be asked of the AGK2, AGK3, AGK3U sequence. In this paper we develop a general method to objectively investigate, post facto, the true quality of star catalog error estimates. We present a complete mathematical formulation of the questions above and delineate the calculations needed to address them. Our initial numerical applications are restricted to a straightforward examination of the mean errors of the coordinates and proper motions in the FK3 (using the FK4 and the FK5 for comparison) and in the FK4 (using the FK5 for comparison). However, we can simply and consistently interpret the results of these computations -- for the FK catalogs fail to follow the predictions of mathematical statistics -- only if the FK3 and the FK4 contain higher angular frequency systematic errors. These errors, at the mean epochs of place of the older catalogs, are larger than the random errors in the FK5 system. We expect that our new ability to discern these features means that we can also prevent them during compilation. Finally, note that the concepts behind our procedures are completely general and can be applied to any set of compiled data -- astrometric, photometric, geodetic, and so forth.
We use the general method of compiled data set analysis developed in our first paper (Bucciarelli et. al. 1994) and extend our analysis of fundamental star catalogs to include the two American ones. The problems found in the FK3/FK4/FK5 sequence are not present in either the GC or the N30. This lends support to the hypothesis advanced in our previous paper that the FK3, and to a lesser extent the FK4 declination system, are distorted by high angular frequency systematics. On the other hand, both the GC and N30 equatorial coordinate and proper motion distributions nicely follow the predictions of mathematical statistics. As with the FK3/FK4/FK5 analysis, the new results are as seen by the FK5 (on the FK4/B1950.0 system).
We present the results of the first high angular resolution observations taken with a Fine Guidance Sensor (FGS) aboard the Hubble Space Telescope (HST) of a star cluster embedded in very bright background. The strong and complex background around the R136 cluster in the 30 Dor nebula does not prevent the FGS from achieving performance close to its angular resolution limit of approximately 0.015 sec per axis with reliable photometry. These FGS observations establish that the central object in R136a is a triple star with the third component delta V = 1.1 mag fainter than the primary star al approximately 0.08 sec way. We estimate from the grid of models of Maeder (1990) that the present mass of al is between 30 and 80 solar masses, with the main-sequence progenitor between 60 and 120 solar masses.
This paper presents the results of the photometric calibration of the F583W filter in the astrometer Fine Guidance Sensor on the Hubble Space Telescope. Dozens of observations of the 9.58 mag Fine Guidance Sensor (FGS) transfer mode reference star Upgren 69 (in the cluster NGC 188) have been utilized to verify the consistency and demonstrate the temporal stability of the photomultipliers. The measurements which provided the material for a transformation from the FGS instrumental system to the Johnson V magnitude consisted of the extensive position mode observations performed during the Optical Field Angle Distortion calibration. A total of 588 measurements of 92 stars in the galactic cluster M35 were performed. Johnson V band photometry with a precision (i.e., random errors) of plus or minus 0.05 mag is available with an accuracy (i.e., systematic errors) of 0.05 mag over 2 yr.
It is shown that previous computations of catalog-to-catalog differences, whether by the bin-and-average method or by least-squares adjustment combined with an expansion in an incomplete set of basis functions, have all been performed at inappropriate epoch(s) of place. As a consequence, such results are frequently much more informative regarding the systematic differences between the proper motion systems than they are with respect to the systematic differences between the positional systems. Moreover, and for the same reason, some sets of proper motion differences really do not portray the true state of the evolution of the proper motion systems. Finally, this has practical effects in other astrometrical work, for instance, in the analysis of earth rotation time series. This error is corrected by arguing for a more meaningful epoch of place for catalog-to-catalog comparisons. This method of infinitely overlapping circles is applied at these other epochs to the FK sequence of catalogs, the N30, and the GC, and as a corollary the effectiveness of this new technique is shown.
An account is given of an updated AGK3 with improved proper motions derived from the Palomar 'Quick V' survey. It is judged that the astrometric potential of large-scale Schmidt plates can be realized via the subplate technique, followed by integration with the results of classical photographic astrometry. The new proper motions have a total 2D mean error of 0.82 arcsec/cy. Extensive quality-assurance double-checking has been performed at each stage of this work.