Search NASA⌕ Search

Engineering topics

Bucknor, Matthew

Publications and source records attributed to Bucknor, Matthew.

At least 37 records · Page 2

Application of the Licensing Modernization Project Approach to the Authorization of the Versatile Test Reactor

The Licensing Modernization Project (LMP) has created a risk-informed, performance-based process for nonlight water reactor licensing under the U.S. Nuclear Regulatory Commission (NRC). Adoption of the LMP process has been recommended by the Advisory Committee on Reactor Safeguards (ACRS) [2] and the NRC has issued a draft regulatory guide [3]. The LMP process utilizes risk information to justify the regulatory treatment of event sequences, the classification of structures, systems, and components (SSCs), and to assist with the evaluation of defense-in-depth (DID). The Versatile Test Reactor (VTR) seeks to leverage the efforts of the LMP to develop a risk-informed, performance-based approach for reactor authorization under the U.S. Department of Energy (DOE). Due to differing rules and regulations between the NRC and DOE, modifications to the LMP process are necessary for the VTR authorization approach. However, the goals regarding risk-informed event categorization, SSC classification, and DID evaluation, remain the same.

Grabaskas, David↗

Risk-Informed Mechanistic Source Term Calculation (Final CRADA Report)

As part of an FY18 U.S. Department of Energy (DOE) Gateway for Accelerated Innovation in Nuclear (GAIN) award, a CRADA agreement was established between Argonne National Laboratory (Argonne) and Oklo. The CRADA focused on the following three tasks to assist Oklo with the regulatory licensing of their innovative nuclear reactor design: • Task 1 – Coupling and Demonstration Analysis using The Nek5000, Diablo, and OpenMC Codes: Establishing a coupling between the neutronic, structural, and thermohydraulic analysis codes and utilizing the code package for a high-fidelity demonstration analysis of radial core expansion due to temperature changes and its impact on core reactivity. • Task 2 – Mechanistic Source Term Analysis: Performing a realistic evaluation of the potential release of radionuclides to the environment during postulated transient event sequences. • Task 3 – Data in Support of Metal Fuel Qualification: An assessment of past postirradiation examination data of metal fuel utilized in the Argonne EBR-II reactor to assist in the potential qualification of the fuel typer for regulatory licensing. The details regarding each analysis and the associated conclusions were provided to Oklo in three separate project reports. Due to the utilization of proprietary and export controlled information, the current summary report was created, which provides an uncontrolled overview of each of the three tasks.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CIAE-ANL CRADA for SFR SAFETY ANALYSIS: Final CRADA Report

The purpose of this project is joint verification and validation of system analysis code capabilities for Sodium-cooled Fast Reactor (SFR) design and licensing. As the researchers and code developers at the Argonne National Laboratory (ANL) and China Institute of Atomic Energy (CIAE) independently build their own SFR system analysis capabilities, this collaboration facilitated exchange of information on, and evaluation of alternative approaches for, modeling the key phenomena (such as decay heat removal and natural circulation) and the safety-related components (such as pumps, heat exchangers, and outlet plenum) common in SFR systems. The analysis at ANL and CIAE also applied their respective computational capabilities and methods (in SAS4A/SASSYS-1 computer code at ANL and FR-Sdaso computer code at CIAE) on jointly identified benchmark problems for verification, and publicly available integral tests for validation, of their results. ANL team also shared the expertise on the established software quality assurance practices and the techniques for component reliability estimates to support probabilistic risk assessments.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of a mechanistic source term approach for liquid-fueled Molten Salt Reactors

In addition to the significant progress being made in accident analyses for some molten salt reactor (MSR) concepts, there remains a need for a thorough, step-by-step source term analyses that includes parametric sensitivity analyses and trial calculations. This report provides a basis for developing an MSR source term model by examining the successful methodology used in the sodium fast reactor (SFR) mechanistic source term work presented by Grabaskas et al., [2016a]. Useful risk analyses tools currently in use for developing MSR source term analyses are also summarized, such as those developed for the European Safety Assessment of the Molten Salt Fast Reactor (SAMOFAR) project. Based on the analyses summarized in this report, a pathway is recommended for a rigorous and technology-neutral MSR source term analysis in the U.S. This report is submitted in fulfillment of Advanced Reactor Technologies, Molten Salt Reactor Campaign, Salt Chemistry work package AT-19AN04060104, milestone number M4AT-19AN040601043.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Probabilistic Risk Assessment Approach for the Versatile Test Reactor

A probabilistic risk assessment (PRA) has been initiated to assist with the design, authorization, and future operation of the Versatile Test Reactor (VTR). The PRA is a vital part of a larger risk-informed authorization approach and is being developed in accordance with two applicable standards.

Grabaskas, David↗

Development of a Thermochemical Database for Sodium Fast Reactor Mechanistic Source Term Calculations

An accurate assessment of the radionuclide source term for sodium fast reactors requires a predictive understanding of the chemical speciation and phase transformations of key dose contributing radionuclides, including those released to the sodium pool and cover gas region. Developing models for chemical speciation and phase equilibria requires the compilation of thermodynamic constants and experimentally determined functions that account for non-ideal solution behavior. For the present study, a thermochemical database, including parameters accounting for non-ideal chemical mixing, was compiled and used for a set of mechanistic source term trial calculations for a metal-fueled, pool-type sodium fast reactor [1].

Jerden, James↗

Thermal Stratification Modeling and Analysis for Sodium Fast Reactor Technology

General discussion of thermal hydraulic phenomenon present in sodium fast reactors during known reactor transients. Specifically, this research focuses on presenting research focused on modeling thermal stratification in the upper plenum of a sodium fast reactor. An experimental facility was built to provide validation for both computational fluid dynamic and system code analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Thermal Stratification Modeling for Sodium-Cooled Fast Reactors: A Status Update

Thermal hydraulic behavior in the upper plenum of pool- type sodium-cooled fast reactors (SFRs) is a major concern, as many design challenges are concentrated in this region. As SFR designs aim for licensing and commercialization, it is important to accurately analyze and predict the thermal-hydraulic behavior in this region during accident scenarios, specifically thermal stratification. Thermal stratification models are currently a major source of uncertainty in most system codes for all types of power plants. Most system codes, including SAS4A/SASSYS-1, a system level code developed by Argonne National Laboratory (Argonne), use very coarse meshes that cannot capture the complexities of the stratification phenomena. While the commonly employed lumped-volume based models for thermal stratification are able to run in a matter of seconds, they result in approximate results and can only handle simple cases. Other 2-D and 3-D methods, such as computational fluid dynamics (CFD) models, can analyze simple configurations with higher fidelity, but come with a relatively large computational expense. Finding a modeling solution that is both accurate and computationally efficient has proven difficult. This paper provides details of a review and gap analysis of the various modeling approaches proposed to date and explores a path forward for future thermal stratification modeling efforts, with a focus on developing new models for the SAS4A/SASSYS-1 system code.

Morgan, Sarah↗

Thermal Stratification Analysis for Sodium Fast Reactors

The sodium fast reactor (SFR) is the most mature reactor concept of all the generation-IV nuclear systems and is a promising reactor design that is currently under development by several organizations. The majority of sodium fast reactor designs utilize a pool type arrangement which incorporates the primary coolant pumps and intermediate heat exchangers within the sodium pool. These components typically protrude into the pool thus reducing the risk and severity of a loss of coolant accidents. To further ensure safe operation under even the most severe transients a more comprehensive understanding of key thermal hydraulic phenomena in this pool is desired. One of the key technology gaps identified for SFR safety is determining the extent and the effects of thermal stratification developing in the pool during postulated accident scenarios such as a protected or unprotected loss of flow incident. In an effort to address these issues, detailed flow models of transient stratification in the pool during an accident can be developed. However, to develop the calculation models, and ensure they can reproduce the underlying physics, highly spatially resolved data is needed. This data can be used in conjunction with advanced computational fluid dynamic calculations to aid in the development of simple reduced dimensional models for systems codes such as SAM and SAS4A/SASSYS-1.

Schneider, James↗

Thermal Stratification Analysis for Sodium Fast Reactors

The sodium fast reactor (SFR) is the most mature reactor concept of all the generation-IV nuclear systems and is a promising reactor design that is currently under development by several organizations. The majority of sodium fast reactor designs utilize a pool type arrangement which incorporates the primary coolant pumps and intermediate heat exchangers within the sodium pool. These components typically protrude into the pool thus reducing the risk and severity of a loss of coolant accidents. To further ensure safe operation under even the most severe transients a more comprehensive understanding of key thermal hydraulic phenomena in this pool is desired. One of the key technology gaps identified for SFR safety is determining the extent and the effects of thermal stratification developing in the pool during postulated accident scenarios such as a protected or unprotected loss of flow incident. In an effort to address these issues, detailed flow models of transient stratification in the pool during an accident can be developed. However, to develop the calculation models, and ensure they can reproduce the underlying physics, highly spatially resolved data is needed. This data can be used in conjunction with advanced computational fluid dynamic calculations to aid in the development of simple reduced dimensional models for systems codes such as SAM and SAS4A/SASSYS-1.

Schneider, James↗

High Efficiency and Low Cost Thermal Energy Storage System

BgtL, LLC (BgtL) is focused on developing and commercializing its proprietary compact technology for processes in the energy sector. One such application is a compact high efficiency Thermal Energy Storage (TES) system that utilizes the heat of fusion through phase change between solid and liquid to store and release energy at high temperatures and incorporate state-of-the-art insulation to minimize heat dissipation. BgtL’s TES system would greatly improve the economics of existing nuclear and coal-fired power plants by allowing the power plant to store energy when power prices are low and sell power into the grid when prices are high. Compared to existing battery storage technology, BgtL’s novel thermal energy storage solution can be significantly less costly to acquire and maintain, does not have any waste or environmental emissions, and does not deteriorate over time; it can keep constant efficiency and operates cleanly and safely. BgtL’s engineers are experienced in this field and are able to design and engineer such a system to a specific power plant’s requirements. BgtL also has a strong manufacturing partner to fabricate the system such that it qualifies for an ASME code stamp. BgtL’s vision is to be the leading provider of compact systems for various applications including energy storage. BgtL requests that all technical information about the TES designs be protected as proprietary information. To honor that request, only non-proprietay summaries are included in this report.

25 ENERGY STORAGE↗

MODELING THE AMBIENT CONDITION EFFECTS OF AN AIR-COOLED NATURAL CIRCULATION SYSTEM

The Reactor Cavity Cooling System (RCCS) is a passive safety concept under consideration for the overall safety strategy of advanced reactors such as the High Temperature Gas-Cooled Reactor (HTGR). One such variant, air-cooled RCCS, uses natural convection to drive the flow of air from outside the reactor building to remove decay heat during normal operation and accident scenarios. The Natural convection Shutdown heat removal Test Facility (NSTF) at Argonne National Laboratory (“Argonne”) is a half-scale model of the primary features of one conceptual air-cooled RCCS design. The facility was constructed to carry out highly instrumented experiments to study the performance of the RCCS concept for reactor decay heat removal that relies on natural convection cooling. Parallel modeling and simulation efforts were performed to support the design, operation, and analysis of the natural convection system. Throughout the testing program, strong influences of ambient conditions were observed in the experimental data when baseline tests were repeated under the same test procedures. Thus, significant analysis efforts were devoted to gaining a better understanding of these influences and the subsequent response of the NSTF to ambient conditions. It was determined that air humidity had negligible impacts on NSTF system performance and therefore did not warrant consideration in the models. However, temperature differences between the building exterior and interior air, along with the outside wind speed, were shown to be dominant factors. Combining the stack and wind effects together, an empirical model was developed based on theoretical considerations and using experimental data to correlate zero-power system flow rates with ambient meteorological conditions. Some coefficients in the model were obtained based on best fitting the experimental data. The predictive capability of the empirical model was demonstrated by applying it to the new set of experimental data. The empirical model was also implemented in the computational models of the NSTF using both RELAP5-3D and STARCCM+ codes. Accounting for the effects of ambient conditions, simulations from both codes predicted the natural circulation flow rates very well.

Hu, Rui↗

A Mechanistic Source Term Calculation for a Metal Fuel Sodium Fast Reactor

A mechanistic source term (MST) calculation attempts to realistically assess the transport and release of radionuclides from a reactor system to the environment during a specific accident sequence. The U.S. Nuclear Regulatory Commission (NRC) has repeatedly stated its expectation that advanced reactor vendors will utilize an MST during the U.S. reactor licensing process. As part of a project to examine possible impediments to sodium fast reactor (SFR) licensing in the U.S., an analysis was conducted regarding the current capabilities to perform an MST for a metal fuel SFR. The purpose of the project was to identify and prioritize any gaps in current computational tools, and the associated database, for the accurate assessment of an MST. The results of the study demonstrate that an SFR MST is possible with current tools and data, but several gaps exist that may lead to possibly unacceptable levels of uncertainty, depending on the goals of the MST analysis.

Grabaskas, David↗

Regulatory Technology Development Plan - Sodium Fast Reactor: Mechanistic Source Term – Trial Calculation

The potential release of radioactive material during a plant incident, referred to as the source term, is a vital design metric and will be a major focus of advanced reactor licensing. The U.S. Nuclear Regulatory Commission has stated an expectation for advanced reactor vendors to present a mechanistic assessment of the potential source term in their license applications. The mechanistic source term presents an opportunity for vendors to realistically assess the radiological consequences of an incident, and may allow reduced emergency planning zones and smaller plant sites. However, the development of a mechanistic source term for advanced reactors is not without challenges, as there are often numerous phenomena impacting the transportation and retention of radionuclides. This project sought to evaluate U.S. capabilities regarding the mechanistic assessment of radionuclide release from core damage incidents at metal fueled, pool-type sodium fast reactors (SFRs). The purpose of the analysis was to identify, and prioritize, any gaps regarding computational tools or data necessary for the modeling of radionuclide transport and retention phenomena. To accomplish this task, a parallel-path analysis approach was utilized. One path, led by Argonne and Sandia National Laboratories, sought to perform a mechanistic source term assessment using available codes, data, and models, with the goal to identify gaps in the current knowledge base. The second path, performed by an independent contractor, performed sensitivity analyses to determine the importance of particular radionuclides and transport phenomena in regards to offsite consequences. The results of the two pathways were combined to prioritize gaps in current capabilities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Methodology for the Integration of a Mechanistic Source Term Analysis in a Probabilistic Framework for Advanced Reactors

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level, the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of PRA methodologies to conduct a mechanistic source term (MST) analysis for event sequences that could result in the release of radionuclides. The MST analysis seeks to realistically model and assess the transport, retention, and release of radionuclides from the reactor to the environment. The MST methods developed during this project seek to satisfy the requirements of the Mechanistic Source Term element of the ASME/ANS Non-LWR PRA standard. The MST methodology consists of separate analysis approaches for risk-significant and non-risk significant event sequences that may result in the release of radionuclides from the reactor. For risk-significant event sequences, the methodology focuses on a detailed assessment, using mechanistic models, of radionuclide release from the fuel, transport through and release from the primary system, transport in the containment, and finally release to the environment. The analysis approach for non-risk significant event sequences examines the possibility of large radionuclide releases due to events such as re-criticality or the complete loss of radionuclide barriers. This paper provides details on the MST methodology, including the interface between the MST analysis and other elements of the PRA, and provides a simplified example MST calculation for a sodium fast reactor.

Grabaskas, Dave↗

A Methodology for the Development of a Reliability Database for an Advanced Reactor Probabilistic Risk Assessment

GE Hitachi Nuclear Energy (GEH) and Argonne National Laboratory are currently engaged in a joint effort to modernize and develop probabilistic risk assessment (PRA) techniques for advanced non-light water reactors. At a high level the primary outcome of this project will be the development of next-generation PRA methodologies that will enable risk-informed prioritization of safety- and reliability-focused research and development, while also identifying gaps that may be resolved through additional research. A subset of this effort is the development of a reliability database (RDB) methodology to determine applicable reliability data for inclusion in the quantification of the PRA. The RDB method developed during this project seeks to satisfy the requirements of the Data Analysis element of the ASME/ANS Non-LWR PRA standard. The RDB methodology utilizes a relevancy test to examine reliability data and determine whether it is appropriate to include as part of the reliability database for the PRA. The relevancy test compares three component properties to establish the level of similarity to components examined as part of the PRA. These properties include the component function, the component failure modes, and the environment/boundary conditions of the component. The relevancy test is used to gauge the quality of data found in a variety of sources, such as advanced reactor-specific databases, non-advanced reactor nuclear databases, and non-nuclear databases. The RDB also establishes the integration of expert judgment or separate reliability analysis with past reliability data. This paper provides details on the RDB methodology, and includes an example application of the RDB methodology for determining the reliability of the intermediate heat exchanger of a sodium fast reactor. The example explores a variety of reliability data sources, and assesses their applicability for the PRA of interest through the use of the relevancy test.

Grabaskas, Dave↗