Engineering topics

Buczek, M. B.

Publications and source records attributed to Buczek, M. B..

6 records

NASA NTRS1985

Free edge strain concentrations in real composite laminates Experimental-theoretical correlation

The magnitude of the maximum shear strain at the free edge of axially loaded theta (2)/theta(2)(s) and (+ or - theta(2) (s) composite laminates was investigated experimentally and numerically to ascertain the actual value of strain concentration in resin matrix laminates and to determine the accuracy of finite element results. Experimental results using moire interferometry show large, but finite, shear strain concentrations at the free edge of graphite-epoxy and graphite-polyimide laminates. Comparison of the experimental results with those obtained using several different finite element representations showed that a four node isoparametric finite element provided the best and most trouble free numerical results. The results indicate that the ratio of maximum shear strain at the free edge to applied axial strain varies with fiber orientation and does not exceed nine for the most critical angle which is 15 deg.

Herakovich, C. T.↗

NASA NTRS1985

A normal stress criterion for crack extension direction in orthotropic composite materials

A criterion for predicting the direction of crack extension in orthotropic composite materials is presented. The criterion is based upon the normal stress and the anisotropic tensile strength on arbitrary planes about the tip of a crack. Results are obtained, via finite element solutions, for: (1) isotropic mixed mode fracture, (2) cracks in unidirectional off-axis slotted composite tensile coupons and (3) cracks in cross plied laminates. Comparisons are made with other theories and experimental results.

Buczek, M. B.↗

NASA NTRS1984

Free edge strain concentrations in real composite laminates: Experimental-theoretical correlation

The magnitude of the maximum shear strain at the free edge of axially loaded theta (2)/-theta(2)(s) and (+ or - theta(2) (s) composite laminates was investigated experimentally and numerically to ascertain the actual value of strain concentration in resin matrix laminates and to determine the accuracy of finite element results. Experimental results using moire interferometry show large, but finite, shear strain concentrations at the free edge of graphite-epoxy and graphite-polyimide laminates. Comparison of the experimental results with those obtained using several different finite element representations showed that a four node isoparametric finite element provided the best and most trouble free numerical results. The results indicate that the ratio of maxium shear strain at the free edge to applied axial strain varies with fiber orientation and does not exceed nine for the most critical angle which is 15 deg.

Herakovich, C. T.↗

NASA NTRS1983

CLFE2D: A generalized plane strain finite element program laminated composites subject to mechanical and hygrothermal loading

CLFE2D is a two dimensional generalized plane strain finite element code, using a linear, four node, general quadrilateral, isoparametric element. The program is developed to calculate the displacements, strains, stresses, and strain energy densities in a finite width composite laminate. CLFE2D offers any combination of the following load types: nodal displacements, nodal forces, uniform normal strain, or hygrothermal. The program allows the user to input one set of three dimensional orthotropic material properties. The user can then specify the angle of material principal orientation for each element in the mesh. Output includes displacements, stresses, strains and strain densities at points selected by the user. An option is also available to plot the underformed and deformed finite element meshes.

Buczek, M. B.↗

NASA NTRS1983

Direction of crack growth in fibrous composites

A model for predicting the direction of crack growth in resin matrix composite materials is presented. The model is based upon the normal stress and the anisotropic tensile strength on arbitrary planes about the tip of a crack. The model is incorporated into a finite element solution which predicts energy release rates in addition to the direction of crack growth. Results are obtained for cracks in unidirectional off-axis slotted tensile coupons. Comparisons are made with other theories and experimental results.

Buczek, M. B.↗

NASA NTRS1982

Finite element models for predicting crack growth characteristics in composite materials

Two dimensional and quasi-three dimensional, linear elastic finite element models for the prediction of crack growth characteristics, including crack growth direction, in laminated composite materials are presented. Mixed mode crack growth in isotropic materials, unidirectional and laminated composites is considered. The modified crack closure method is used to predict the applied load level for crack extension and two failure theories, modifications of the point stress and the Hashin failure criteria, are proposed to predict the direction of crack extension in composites. Comparisons are made with the Tsai-Wu failure criterion and the Sih strain energy density criterion as well as with experimental results. It is shown that the modified versions of point stress and Hashin criteria compare well with experiment.

Buczek, M. B.↗