Search NASA⌕ Search

Engineering topics

Bugg, F.

Publications and source records attributed to Bugg, F..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

National Launch System cycle 1 loads and models data book

This document contains preliminary cycle 1 loads for the National Launch System (NLS) 1 and 2 vehicles. The loads provided and recommended as design loads represent the maximum load expected during prelaunch and flight regimes, i.e., limit loads, except that propellant tank ullage pressure has not been included. Ullage pressure should be added to the loads book values for cases where the addition results in higher loads. The loads must be multiplied by the appropriate factors of safety to determine the ultimate loads for which the structure must be capable.

Bugg, F.↗
NASA NTRS1982

Solid rocket booster water impact test

Water impact drop tests were performed on the space shuttle solid rocket boosters (SRB). Peak water impact pressures and pressure/time traces were measured for various impact velocities using a two-dimensional, full-scale SRB aft skirt internal ring model. Passive burst disc-type pressure transducers were calibrated for use on flight SRB's. The effects on impact pressure of small ring configuration changes and application of thermal protection system cork layers were found to be negligible.

Bugg, F.↗
NASA NTRS1981

Viscoelastic propellant effects on Space Shuttle Dynamics

The program of solid propellant research performed in support of the space shuttle dynamics modeling effort is described. Stiffness, damping, and compressibility of the propellant and the effects of many variables on these properties are discussed. The relationship between the propellant and solid rocket booster dynamics during liftoff and boost flight conditions and the effects of booster vibration and propellant stiffness on free free solid rocket booster modes are described. Coupled modes of the shuttle system and the effect of propellant stiffness on the interfaces of the booster and the external tank are described. A finite shell model of the solid rocket booster was developed.

Bugg, F.↗
NASA NTRS1973

Evaluation of flexible ring baffles for damping liquid oscillations

An experimental study was undertaken of damping produced by single flexible-ring baffles in a 396-cm diameter tank of liquid nitrogen. Two 24.8-cm wide baffles were tested. One baffle was 0.00635 cm thick type 301 stainless steel and the other 0.0254 cm thick Teflon FEP. Each baffle produced damping of liquid oscillations equal to or greater than that expected from rigid baffles of the same size. The equations used to determine the baffle thickness required were found to be adequate baffle design equations.

Bugg, F.↗