Search NASA⌕ Search

Engineering topics

Bukola, Saheed

Publications and source records attributed to Bukola, Saheed.

Hydrogen Crossover Flux through Two-Dimensional Nanomaterials

Energy storage and conversion devices require an ion-exchange membrane with high transmission of charge-balancing ions and separation of anode and cathode electrolytes/gases. This ensures optimum device performance. Most conventional membranes suffer huge cross-permeation resulting in low energy efficiency and material degradation. This work investigated hydrogen permeability and proton transmission through membrane electrode assemblies (MEAs) containing a monolayer of hexagonal boron nitride and single-layer and bi-layer graphene in a gas-phase small-scale cell and a liquid cell. Here we found that the hydrogen crossover flux through MEAs with 2D materials was inhibited by at least a factor of 5 compared to the one without. Single-layer graphene and boron nitride enabled high proton transmission, but bi-layer graphene inhibited proton conduction. Defect visualization of 2D materials revealed few atomic-scale defects in graphene. These findings suggest that a monolayer of 2D material may provide good selectivity for energy conversion and storage devices by blocking species crossover while allowing high proton transmission.

2D materials↗

Membrane-Induced Vanadium Crossover-Blocking Polybenzimidazole Copolymer with Exceptional Proton Selectivity

Broad deployment of redox flow batteries is hindered, in part, due to the lack of highly selective ion-exchange membranes with high proton conductivity. We report a post-functionalization strategy for polybenzimidazole copolymer (PBI-co) membranes by a reacting mixture of concentrated sulfuric and phosphoric acids that led to improved membrane selectivity while retaining high proton conductivity. Fourier-transform infrared spectroscopy confirmed successful sulfonation and protonation of benzimidazole functionalities. PBI-co exhibits a very high room-temperature proton conductivity of 0.138 S cm -1 , as measured by electrochemical impedance spectroscopy. PBI-co also demonstrates electromigration crossover mitigation under applied current densities up to 500 mA cm -2 , and voltage pulses up to 1.4 V, while also inhibiting diffusion-driven vanadium crossover for over 20 days. Single-cell vanadium flow battery testing on post-functionalized PBI-co further confirms state-of-the-art battery performance with an ~99.5% Coulombic efficiency at 100 mA cm -2 and an area-specific resistance of ~20 mO cm 2 lower than Nafion-212 membrane.

25 ENERGY STORAGE↗

Single-layer graphene as a highly selective barrier for vanadium crossover with high proton selectivity

In this paper, we report near-zero crossover for vanadium cross-permeation through single-layer graphene immobilized at the interface of two Nafion® polymer electrolyte membranes. Vanadium ion diffusion and migration, including proton mobility through membrane composites, were studied with and without graphene under diffusion and migration conditions. Single-layer graphene was found to effectively inhibit vanadium ion diffusion and migration under specific conditions. The single-layer graphene composites also enabled remarkable ion transmission selectivity improvements over pure Nafion® membranes, with proton transport being four orders of magnitude faster than vanadium ion transport. Resistivity values of 0.02 ± 0.005 Ω cm 2 for proton and 223 ± 4 Ω cm 2 for vanadium ion through single atomic layer graphene are reported. This high selectivity may have significant impact on flow battery applications or for other electrochemical devices where proton conductivity is required, and transport of other species is detrimental. Our results emphasize that crossover may be essentially completely eliminated in some cases, enabling for greatly improved operational viability.

2D nanomaterial↗