Hydraulic Properties Data Package for the E-Area Soils, Cementitious Materials, and Waste Zones–Update
Hydraulic property estimates for the soils, cementitious materials, and waste zones associated with the E-Area low-level radioactive waste disposal units have been provided to support the Performance Assessments (PA) for the E-Area Low-Level Waste Facility (LLWF). Nominal or “best estimate” hydraulic property values for use in the deterministic modeling are provided along with representations of the hydraulic property value uncertainty for use in sensitivity and uncertainty modeling. The hydraulic properties provided for each of the E-Area materials include: porosity ( η ), dry bulk density ( ρ b ), particle density (ρ p ), saturated hydraulic conductivity ( K sat ), characteristic curves (suction head, saturation, and relative permeability), and effective diffusion coefficient ( D e ). A representation of the uncertainty associated with each property, except for the characteristic curves, is provided for each material, except for the E-Area waste zones. These nominal parameter values for each of the E-Area soils, cementitious materials, and waste zones, and, where indicated, parameter uncertainty representations, are based upon the following in order of priority: Site-specific field data, Site-specific laboratory data, Similarity to material with site-specific field or laboratory data, and Literature data. Additionally, a methodology to represent long-term concrete degradation is provided. Finally, because much of the nominal hydraulic property values and uncertainty representations for the E-Area soils, cementitious materials, and waste zones are based on similarity to other materials or literature data, a methodology to prioritize additional work to better define these values and representations is outlined. Prioritization should be based on the importance of the material and/or property to the results of deterministic, sensitivity, and uncertainty modeling. This prioritization should be established through a process of sensitivity modeling. This report supersedes the previous hydraulic properties data package. Revision 1 contains clarifications, updates and corrections to text, figures and tables in a number of places in the report along with some minor editing.