Engineering topics

Butterfield, Ansel J.

Publications and source records attributed to Butterfield, Ansel J..

9 records

NASA NTRS2001

Data Mining of NASA Boeing 737 Flight Data: Frequency Analysis of In-Flight Recorded Data

Data recorded during flights of the NASA Trailblazer Boeing 737 have been analyzed to ascertain the presence of aircraft structural responses from various excitations such as the engine, aerodynamic effects, wind gusts, and control system operations. The NASA Trailblazer Boeing 737 was chosen as a focus of the study because of a large quantity of its flight data records. The goal of this study was to determine if any aircraft structural characteristics could be identified from flight data collected for measuring non-structural phenomena. A number of such data were examined for spatial and frequency correlation as a means of discovering hidden knowledge of the dynamic behavior of the aircraft. Data recorded from on-board dynamic sensors over a range of flight conditions showed consistently appearing frequencies. Those frequencies were attributed to aircraft structural vibrations.

Butterfield, Ansel J.↗

NASA NTRS1992

Lunar Habitat Would Be Assembled In Space

Conceptual lunar habitat built inside external tank from National Space Transportation System (NSTS). Tank modified in low Earth orbit using existing structures and openings for access without compromising structural integrity. Designed for unmanned transport to orbit around Moon, and autonomous soft landing. Houses crew of 12 for 70 days between resupply missions.

King, Charles B.↗

NASA NTRS1992

Method of providing a lunar habitat from an external tank

A lunar habitat is provided by placing an external tank of an orbiter in a low Earth orbit where the hydrogen tank is separated from the intertank and oxygen tank which form a base structure. The base structure is then outfitted with an air lock, living quarters, a thermal control system, an environmental control and life support system, and a propulsion system. After the mounting of an outer sheath about the base structure to act as a micrometeoroid shield, the base structure is propelled to a soft landing on the moon. The sheath is mounted at a distance from the base structure to provide a space therebetween which is filled with regolith after landing. Conveniently, a space station is used to outfit the base structure. Various elements of the oxygen tank and intertank are used in outfitting.

King, Charles B.↗

NASA NTRS1992

Method of delivering lunar generated fluid to earth orbit using an external tank

A method and apparatus are provided for delivering lunar generated fluid to Earth orbit from lunar orbit. Transport takes place in an external tank of a shuttle which has been suitably outfitted in Earth orbit for reusable travel between Earth orbit and a lunar orbit. The outfitting of the external tank includes the adding of an engine, an electrical system, a communication system, a guidance system, an aerobraking device, and a plurality of interconnected fluid storage tanks to the hydrogen and oxygen tanks of the external tank. The external tank is then propelled to lunar orbit the first time using Earth-based propellant. In lunar orbit, the storage tanks are filled with the lunar generated fluid with the remainder tank volumes filled with lunar generated liquid oxygen and hydrogen which serve as propellants for returning the tank to Earth orbit where the fluid is off-loaded. The remaining lunar generated oxygen and hydrogen is then sufficient to return the external tank to lunar orbit so that a subsequent cycle of fluid delivery is repeated. A space station in a higher Earth orbit is preferably used to outfit the external tank, and a lunar node in lunar orbit is used to store and transfer the fluid and liquid oxygen and hydrogen to the external tank. The lunar generated fluid is preferably .sup.3 He.

Butterfield, Ansel J.↗

NASA NTRS1991

Sunsynchronous low Earth orbit spacecraft concepts and technology requirements for global change monitoring

The Global Change Technology Initiative listing of instruments for operation in low Earth, sunsynchronous orbits contain 21 entries, of which 20 are carried aboard multi-instrument spacecraft. This list identifies the temporal requirements for repetition of measurements and also includes groups of instruments that make complementing measurements. Definitions for individual spacecraft follows the temporal and grouping requirements to establish constellations which will provide the measurement data. The definitions of constellations for multi-instrument spacecraft show two alternatives: a constellation of 10 spacecraft, each compatible with launch by a Delta booster; a constellation of 4 spacecraft, each requiring a Titan booster. Operating subsystems for the individual spacecraft can use modular concepts that are adaptations based upon current plans for improving the performance of the NASA-Goddard Multimission Modular units. The descriptions of the spacecraft and constellations begins with a compilation of instrument related requirements that define the principal system performance parameters and operating capabilities.

Garrett, L. Bernard↗

NASA NTRS1991

Benefits from synergies and advanced technologies for an advanced-technology space station

A configuration for a second-generation advanced technology space station has been defined in a series of NASA-sponsored studies. Definitions of subsystems specifically addressed opportunities for beneficial synergistic interactions and those potential synergies and their benefits are identified. One of the more significant synergistic benefits involves the multi-function utilization of water within a large system that generates artificial gravity by rotation. In such a system, water not only provides the necessary crew life support, but also serves as counterrotator mass, as moveable ballast, and as a source for propellant gases. Additionally, the synergistic effects between advanced technology materials, operation at reduced artificial gravity, and lower cabin atmospheric pressure levels show beneficial interactions that can be quantified in terms of reduced mass to orbit.

Garrett, L. Bernard↗

NASA NTRS1990

Single launch lunar habitat derived from an NSTS external tank

A concept for using the spent external tank from a National Space Transportation System (NSTS) to derive a lunar habitat is described. The external tank is carried into low Earth orbit where the oxygen tank-intertank subassembly is separated from the hydrogen tank, berthed to Space Station Freedom and the subassembly outfitted as a 12-person lunar habitat using extravehicular activity (EVA) and intravehicular activity (IVA). A single launch of the NSTS orbiter can place the external tank in LEO, provide orbiter astronauts for disassembly of the external tank, and transport the required subsystem hardware for outfitting the lunar habitat. An estimate of the astronauts' EVA and IVA is provided. The liquid oxygen intertank modifications utilize existing structures and openings for man access without compromising the structural integrity of the tank. The modifications include installation of living quarters, instrumentation, and an airlock. Feasibility studies of the following additional systems include micrometeoroid and radiation protection, thermal control, environmental control and life support, and propulsion. The converted lunar habitat is designed for unmanned transport and autonomous soft landing on the lunar surface without need for site preparation. Lunar regolith is used to fill the micrometeoroid shield volume for radiation protection using a conveyer. The lunar habitat concept is considered to be feasible by the year 2000 with the concurrent development of a space transfer vehicle and a lunar lander for crew changeover and resupply.

King, Charles B.↗

NASA NTRS1990

Lunar habitat concept employing the Space Shuttle external tank

The Space Shuttle external tank, which consists of a liquid oxygen tank, an intertank structure, and a liquid hydrogen tank, is an expendable structure used for approximately 8.5 min during each launch. A concept for outfitting the liquid oxygen tank-intertank unit for a 12-person lunar habitat is described. The concept utilizes existing structures and openings for both man and equipment access without compromising the structural integrity of the tank. Living quarters, instrumentation, environmental control and life support, thermal control, and propulsion systems are installed at Space Station Freedom. The unmanned habitat is then transported to low lunar orbit and autonomously soft landed on the lunar surface. Design studies indicate that this concept is feasible by the year 2000 with concurrent development of a space transfer vehicle and manned cargo lander for crew changeover and resupply.

King, Charles B.↗

NASA NTRS1989

Propulsion requirements for the supply of lunar-derived oxygen for a manned Mars mission

The use of lunar-derived liquid oxygen with hydrogen for robust manned explorations beyond earth is discussed. The propellant mixture ratio for optimal performance is near the current design point of r = 6. The results of NASA-sponsored studies of missions using cryogenic bipropellant H2-O2 for most functions reveal the potential benefits from a propellant terminal in cis-lunar space. The main propulsion technologies associated with Mars mission case studies include: in-space fluid transfer, zero-g ignition, oxygen-enriched propellant mixtures, throttling of main engines, and H2-O2 based auxiliary propulsion.

Wrobel, J. Richard↗