Search NASA⌕ Search

Engineering topics

Butterfield, Sandy

Publications and source records attributed to Butterfield, Sandy.

3D Concrete Printing Concept Could Solve Tall-Wind Dilemma

When building a wind turbine, you want to make it as tall as possible to capture stronger, faster winds aloft. But taller tower bases become too large to be transported over the road—a constraint that has kept average U.S. wind turbine heights at 80 meters for the last 10 years. A Lab-Corps project undertaken by the National Renewable Energy Laboratory has found a potential solution: automated concrete manufacturing.

17 WIND ENERGY↗

Base excitation testing system using spring elements to pivotally mount wind turbine blades

A system (1100) for fatigue testing wind turbine blades (1102) through forced or resonant excitation of the base (1104) of a blade (1102). The system (1100) includes a test stand (1112) and a restoring spring assembly (1120) mounted on the test stand (1112). The restoring spring assembly (1120) includes a primary spring element (1124) that extends outward from the test stand (1112) to a blade mounting plate (1130) configured to receive a base (1104) of blade (1102). During fatigue testing, a supported base (1104) of a blad (1102) may be pivotally mounted to the test stand (1112) via the restoring spring assembly (1120). The system (1100) may include an excitation input assembly (1140) that is interconnected with the blade mouting plate (1130) to selectively apply flapwise, edgewise, and/or pitch excitation forces. The restoring spring assemply (1120) may include at least one tuning spring member (1127) positioned adjacent to the primary spring element (1124) used to tune the spring constant or stiffness of the primary spring element (1124) in one of the excitation directions.

17 WIND ENERGY↗

Advanced Gearless Drivetrain - Phase I Technical Report

Boulder Wind Power (BWP) collaborated with the National Renewable Energy Laboratory (NREL) in Golden, Colorado, to demonstrate the economics of scaling an advanced gearless drivetrain technology to 6MW (and larger) turbine applications. The project goal was to show that this advanced drivetrain technology enables a cost of energy of less than $\$$0.10/kWH in offshore applications. This drivetrain technology achieves this Cost of Energy (COE) advantage via a 70% greater torque density versus current state-of-the-art drivetrain technologies. In addition, a new dynamically compliant design strategy is required to optimize turbine system-level COE. The BWP generator is uniquely suited for this new design strategy. This project developed a concept design for a 6MW drivetrain and culminated in a plan for a system-level test of this technology at 3MW scale. The project further demonstrated the advantage of the BWP drivetrain with increasing power ratings, with conceptual designs through 10 MW.

17 WIND ENERGY↗

Wind Turbine Drivetrain Condition Monitoring During GRC Phase 1 and Phase 2 Testing

This report will present the wind turbine drivetrain condition monitoring (CM) research conducted under the phase 1 and phase 2 Gearbox Reliability Collaborative (GRC) tests. The rationale and approach for this drivetrain CM research, investigated CM systems, test configuration and results, and a discussion on challenges in wind turbine drivetrain CM and future research and development areas,will be presented.

17 WIND ENERGY↗