Evaluation of parallel injector configurations for Mach 2 combustion
Explore the source record for details and available documents.
Northam, G. B.↗
Engineering topics
Byington, C. S.
Publications and source records attributed to Byington, C. S..
Mach 2 and Mach 3 mixing and combustion in scramjets
Experimental and theoretical studies are being conducted to explore techniques to enhance mixing in scramjet combustors using parallel fuel injection from the base of swept and unswept wall-mounted ramps. Parallel injection may be useful in high speed scramjets due to the thrust contributed by the momentum of expanding fuel that has been heated in the vehicle cooling cycle. The experiments reported herein were conducted using Mach 2 and 3 combustor inlet conditions. Supporting computational and cold flow studies indicated that the observed enhanced mixing for the swept ramp configuration is primarily due to the substantially higher degree of vorticity and entrainment generated by the swept trailing edges.
Northam, G. B.↗
Supersonic mixing and combustion in scramjets
Experimental and theoretical studies are being conducted to explore techniques to enhance mixing in scramjet combustors using parallel fuel injection from the base of swept and unswept wall-mounted ramps. The experiments reported herein were conducted using Mach 2 and 3 combustor inlet conditions. Supporting computational and cold flow studies indicated that the observed enhanced mixing for the swept ramp configuration is primarily due to the substantially higher degree of vorticity and entrainment generated by the swept trailing edges.
Northam, G. B.↗
Evaluation of parallel injector configurations for supersonic combustion
Techniques for the enhancement of mixing in a scramjet combustor are presently investigated experimentally with wall-mounted parallel injector ramps that are speculated to prove useful at high speeds in the extraction of thrust from engine- or airframe-coolant hydrogen. The injector ramps were designed to generate a reflected shock wave from the duct top wall which will pass just downstream of the fuel injectors' barrel shock; fuel injector Mach number is 1.7, in virtue of which an underexpanded fuel flow is generated. Shadowgraph and UV-TV flow visualizations were conducted for three duct configurations.
Northam, G. Burton↗