Search NASA⌕ Search

Engineering topics

Caballero, Daison

Publications and source records attributed to Caballero, Daison.

Model-Based Sequential Design of Experiments for Pilot Testing of Novel Water-Lean CO2 Capture Solvent

Poster for the 2024 Fossil Energy and Carbon Management Meeting. It summarizes work done on process modeling and uncertainty quantification in preparation for the test campaign at the National Carbon Capture Center for a general audience. The poster includes sections detailing background on the EEMPA solvent, sequential design of experiments, process modeling (including results from the model), uncertainty quantification, and the goals of the test campaign.

Hedrick, Katherine↗

Modeling and Analysis of Climate Variation Effects on Fixed-Bed Direct Air Capture Systems

This poster was presented at the 2024 FECM/ NETL Carbon Management Research Project Review Meeting held August 5th-9th in Pittsburgh, PA. The poster discusses the modeling, optimization, and analysis of a solid sorbent based direct air capture process. Analysis of the performance of the system when exposed to varying ambient conditions is also presented.

Hughes, Ryan↗

Techno-economic Analysis and Optimization of Point Source Solvent-Based Carbon Capture Systems at High CO2 Capture Levels for NGCC Power Plants

This poster was presented at the 2024 FECM / NETL Carbon Management Research Project Review Meeting held during Aug 5-9, 2024. It summarizes the research done as a part of CCSI2 for determining the optimal design and operating conditions of an MEA solvent-based carbon capture system connected to a commercial scale NGCC plant, operating at CO2 capture levels beyond 90%. The techno-economic optimization approach is outlined, along with the trends of key cost and performance indicators across high capture levels.

Deshpande, Anuja↗

Techno-Economic Optimization of Fixed Bed and Moving Bed Contactors for CO2 Capture from NGCC Plants Using a Functionalized Metal-Organic Framework

Amine-appended metal–organic frameworks (MOFs) have strong potential for post-combustion CO2 capture from NGCC plants. In this work, a specific tetramine-appended MOF, Mg2(dobpdc)(3-4-3) (dobpdc4− = 4,4′-dioxidobiphenyl-3,3′dicarboxylate; 3-4-3 = N,N′bis(3-aminopropyl)-1,4-diaminobutane), is evaluated due to its superior performance compared to other candidate diamine-appended and tetraamine-appended MOFs. Techno-economic optimization is performed to minimize the cost of capture by using the Framework for Optimization, Quantification of Uncertainty, and Surrogates (FOQUS), which is capable of optimizing systems by using derivative-free optimization solvers where process models are built using numerous modeling platforms. The technical and economic performances of both fixed bed and moving bed processes are compared with state-of-the-art amine-based solvent systems.

Hughes, Ryan↗

Simulation and Sensitivity Analysis of a Cryogenic Carbon Capture System for the Cement Industry

The talk will describe modeling and analysis of cryogenic systems for carbon capture from industrial point sources, thermodynamic and process simulation requirements to predict capture from typical flue gases, quantification of temperature and flow profiles for a range of gas feed compositions and capture levels, and impacts of process conditions and heat transfer on energy requirements for heat integration.

Paul, Brandon↗

Process Modeling and Analysis of a Novel Sorbent Material for Direct Air Capture Applications

This poster presents results of Task 9.0, Advanced Modeling Support of CDR Pilot Projects, of the Carbon Dioxide Removal program (CDR FWP23). Specifically, the poster presents the multi-scale modelling framework to investigate alternate processes configuration for DAC applications including Vacuum-Assisted Temperature Swing Adsorption (TVSA) process and sweep gas for regeneration.

Caballero, Daison↗

Mathematical Optimization of NGCC Solvent-based Carbon Capture Processes to Explore High Capture Designs

For point-source capture, much of the work to date has focused on achieving 90% capture – a somewhat arbitrary target above which parasitic losses to drive carbon capture and compression systems were believed to be too great to be economically justifiable. The recent push for deep decarbonization has caused this target to be revisited, and existing literature is of limited usefulness as most published studies have focused on carbon capture percentages of 90%. In this work, numerous mathematical optimizations were performed between carbon capture targets between 90%-99.8% of a Natural Gas Combined Cycle (NGCC) plant to better understand incremental cost of these systems so they may be compared to other decarbonization technologies, and to inform technical risk associated with targeting higher capture performance for these types of systems.

carbon capture↗

Isotherm Modeling and Techno-Economic Analysis of Contactor Technologies for New Tetraamine-Appended MOF for NGCC Applications

Recently, a family of tetraamine-functionalized metal-organic frameworks (MOF) has been reported as promising sorbent materials for capturing CO2 from flue gas conditions relevant to natural gas combined cycle (NGCC) applications. The main advantages of these materials are their two-step cooperative CO2 adsorption, which gives rise to unusual two step-shaped CO2 adsorption profiles and their high thermal stability. This work presents the modelling of the two-transition isotherm of the tetraamine-appended MOF, N,N'-bis(3-aminopropyl)-1,4-diaminobutane (3-4-3)-appended Mg2(dobpdc), and the techno-economic analysis (TEA) of carbon capture processes utilizing this sorbent. Due to the unusual isotherm shapes of the experimental CO2 adsorption data for tetraamine-appended Mg2(dobpdc) and the strong nonlinearity of CO2 loading with respect to temperature and pressure, we tested two different models which use logistic functions for representing the different isotherm behaviors in the different pressure ranges. The first model uses the quadratic isotherm model in the low-pressure region, the Langmuir isotherm model in the middle pressure range, and the dual site Langmuir isotherm model in the high-pressure range. To model the transition between regions we used the arctangent functions independent of temperature and the thermal effect was accounted by using the Clausius-Clapeyron relation]. The second model is an extension of the weighted dual-site Langmuir isotherm model presented by Hughes et al.. In this extended model, the dual-site Langmuir isotherm is employed in the three transition regions, using temperature-dependent logistic functions to activate or deactivate the isotherm model in the low, middle, and high-pressure ranges. Both models fit the experimental data quite well with root mean squared errors (RMSE’s) of 0.41 and 0.17 for model 1 and model 2, respectively. Since model 2 resulted in a lower RMSE, it was leveraged for the development of the gas/solid contactor models used by the TEA. Specifically, two different contactor models, an axial-flow fixed bed and moving bed contactor, were developed as part of this work. These models are dynamic, pressure-driven, and consist of mass, energy, and momentum conservation equations. A kinetic model was also developed by performing parameter estimation using experimental fixed bed breakthrough data. These models are then used to simulate CO2 capture processes from the flue gas generated from a ~600 gross MW NGCC power plant. A cost model was developed which considers the capital cost of the reactors and the significant operating costs such as steam and electricity. Using NETL’s Framework for the Optimization and Quantification of Uncertainty of Uncertainty and Surrogates tool (FOQUS), which has the capability of linking models built using numerous modelling platforms with derivative-free optimization solvers, a techno-economic optimization of the carbon capture processes was performed which minimizes the cost of capture.

Caballero, Daison↗

Framework for Optimization, Quantification of Uncertainty and Surrogates – Updated Capabilities

This poster presents updated capabilities within the FOQUS Toolset, covering core features as well as project-based applications. Specifically, the poster highlights advancements in FOQUS integration with cloud-based clients, plugin support for machine learning tools and external simulations, sequential design of experiments, and advanced support for dynamic process models. The applications demonstrate the breadth of FOQUS predictive capabilities for chemical, energy and economic system analysis.

Paul, Brandon↗

Process Modeling and Optimization of DAC Systems and Novel Sorbent Materials

This poster presents an overview of the general methodology to be implemented in Task 9.0, Advanced Modeling Support of CDR Pilot Projects, of the Carbon Dioxide Removal program (CDR FWP22). Specifically, the poster presents the multi-scale modelling framework and optimization approaches to develop DAC systems, and how this can support bench/pilot scale tests that improve data collection and minimize uncertainty for scale-up of DAC technologies.

Caballero, Daison↗

Techno-Economic Analysis and Optimization for MOF-Based CO2 Capture from NGCC Applications

This poster presents the development of isotherm and contactor models for a tetraamine MOF for CO2 capture from NGCC flue gas sources. It presents results for development of an isotherm model for a tetraamine MOF, validation of a fixed bed model to experimental fixed bed breakthrough data, and optimization of a fixed bed TSA process and moving bed TSA process for CO2 capture from a NGCC flue gas source.

Matuszewski, Michael↗