Engineering topics
Cai, Hui
Publications and source records attributed to Cai, Hui.
Differential patterns of reproductive and lifestyle risk factors for breast cancer according to birth cohorts among women in China, Japan and Korea
Background: The birth cohort effect has been suggested to influence the rate of breast cancer incidence and the trends of associated reproductive and lifestyle factors. We conducted a cohort study to determine whether a differential pattern of associations exists between certain factors and breast cancer risk based on birth cohorts. Methods: This was a cohort study using pooled data from 12 cohort studies. We analysed associations between reproductive (menarche age, menopause age, parity and age at first delivery) and lifestyle (smoking and alcohol consumption) factors and breast cancer risk. We obtained hazard ratios (HRs) with 95% confidence intervals (CIs) using the Cox proportional hazard regression analysis on the 1920s, 1930s, 1940s and 1950s birth cohorts. Results: Parity was found to lower the risk of breast cancer in the older but not in the younger birth cohort, whereas lifestyle factors showed associations with breast cancer risk only among the participants born in the 1950s. In the younger birth cohort group, the effect size was lower for parous women compared to the other cohort groups (HR [95% CI] 0.86 [0.66–1.13] compared to 0.60 [0.49–0.73], 0.46 [0.38–0.56] and 0.62 [0.51–0.77]). Meanwhile, a higher effect size was found for smoking (1.45 [1.14–1.84] compared to 1.25 [0.99–1.58], 1.06 [0.85–1.32] and 0.86 [0.69–1.08]) and alcohol consumption (1.22 [1.01–1.48] compared to 1.10 [0.90–1.33], 1.15 [0.96–1.38], and 1.07 [0.91–1.26]). Conclusion: We observed different associations of parity, smoking and alcohol consumption with breast cancer risk across various birth cohorts.
Obesity is associated with biliary tract cancer mortality and incidence: A pooled analysis of 21 cohort studies in the Asia Cohort Consortium
Abstract Body fatness is considered a probable risk factor for biliary tract cancer (BTC), whereas cholelithiasis is an established factor. Nevertheless, although obesity is an established risk factor for cholelithiasis, previous studies of the association of body mass index (BMI) and BTC did not take the effect of cholelithiasis fully into account. To better understand the effect of BMI on BTC, we conducted a pooled analysis using population‐based cohort studies in Asians. In total, 905 530 subjects from 21 cohort studies participating in the Asia Cohort Consortium were included. BMI was categorized into four groups: underweight (<18.5 kg/m 2 ); normal (18.5‐22.9 kg/m 2 ); overweight (23‐24.9 kg/m 2 ); and obese (25+ kg/m 2 ). The association between BMI and BTC incidence and mortality was assessed using hazard ratios (HR) and 95% confidence intervals (CIs) by Cox regression models with shared frailty. Mediation analysis was used to decompose the association into a direct and an indirect (mediated) effect. Compared to normal BMI, high BMI was associated with BTC mortality (HR 1.19 [CI 1.02‐1.38] for males, HR 1.30 [1.14‐1.49] for females). Cholelithiasis had significant interaction with BMI on BTC risk. BMI was associated with BTC risk directly and through cholelithiasis in females, whereas the association was unclear in males. When cholelithiasis was present, BMI was not associated with BTC death in either males or females. BMI was associated with BTC death among females without cholelithiasis. This study suggests BMI is associated with BTC mortality in Asians. Cholelithiasis appears to contribute to the association; and moreover, obesity appears to increase BTC risk without cholelithiasis.
Stabilized Synthesis of 2D Verbeekite: Monoclinic PdSe 2 Crystals with High Mobility and In-Plane Optical and Electrical Anisotropy
PdSe 2 has a layered structure with an unusual, puckered Cairo pentagonal tiling. Its atomic bond configuration features planar 4-fold-coordinated Pd atoms and intralayer Se–Se bonds that enable polymorphic phases with distinct electronic and quantum properties, especially when atomically thin. PdSe 2 is conventionally orthorhombic, and direct synthesis of its metastable polymorphic phases is still a challenge. Here, we report an ambient-pressure chemical vapor deposition approach to synthesize metastable monoclinic PdSe 2 . Monoclinic PdSe 2 is shown to be synthesized selectively under Se-deficient conditions that induce Se vacancies. These defects are shown by first-principles density functional theory calculations to reduce the free energy of the metastable monoclinic phase, thereby stabilizing it during synthesis. Further, the structure and composition of the monoclinic PdSe 2 crystals are identified and characterized by scanning transmission electron microscopy imaging, convergent beam electron diffraction, and electron energy loss spectroscopy. Polarized Raman spectroscopy of the monoclinic PdSe 2 flakes reveals their strong in-plane optical anisotropy. Electrical transport measurements show that the monoclinic PdSe 2 exhibits n-type charge carrier conduction with electron mobilities up to ~298 cm 2 V –1 s –1 and a strong in-plane electron mobility anisotropy of ~1.9. The defect-mediated growth pathway identified in this work is promising for phase-selective direct synthesis of other 2D transition metal dichalcogenides.
Defect detection in atomic-resolution images via unsupervised learning with translational invariance
Abstract Crystallographic defects can now be routinely imaged at atomic resolution with aberration-corrected scanning transmission electron microscopy (STEM) at high speed, with the potential for vast volumes of data to be acquired in relatively short times or through autonomous experiments that can continue over very long periods. Automatic detection and classification of defects in the STEM images are needed in order to handle the data in an efficient way. However, like many other tasks related to object detection and identification in artificial intelligence, it is challenging to detect and identify defects from STEM images. Furthermore, it is difficult to deal with crystal structures that have many atoms and low symmetries. Previous methods used for defect detection and classification were based on supervised learning, which requires human-labeled data. In this work, we develop an approach for defect detection with unsupervised machine learning based on a one-class support vector machine (OCSVM). We introduce two schemes of image segmentation and data preprocessing, both of which involve taking the Patterson function of each segment as inputs. We demonstrate that this method can be applied to various defects, such as point and line defects in 2D materials and twin boundaries in 3D nanocrystals.
Automatic detection of crystallographic defects in STEM images by unsupervised learning with translational invariance
Explore the source record for details and available documents.
The synthesis of competing phase GeSe and GeSe 2 2D layered materials
We report the synthesis of layered anisotropic semiconductor GeSe and GeSe 2 nanomaterials through low temperature and atmospheric pressure chemical vapor deposition using halide based precursors. The crystal phase is controlled by simply changing selenium vapor pressure.
Heterogeneities at multiple length scales in 2D layered materials: From localized defects and dopants to mesoscopic heterostructures
Two-dimensional (2D) materials hold great promise for applications in optoelectronics, quantum information science, and energy conversion due to their remarkable properties imbued by their physical characteristics. Although heterogeneities in their intrinsic structure are the major challenges limiting their synthesis and predictable properties, they also provide a pathway to controllably tune the properties and broaden the potential of 2D materials. Heterogeneities that can be tailored, including defects, dopants, strain, edges, and layer stackings offer transformative opportunities in heterogeneous 2D materials through the introduction of novel properties for technological applications. This article provides a review of recent progress in studying heterogeneities in 2D materials. The review uses examples from our work to develop a strategy to understand the heterogeneities across multiple length scales to link the effect of heterogeneity at the nanoscale with the macroscale properties of 2D materials. We describe specific types of heterogeneities and explore novel synthesis and processing methods for their controlled production with example of the potential impact and applications enabled by their intriguing properties. Finally, we provide a perspective on how to extend the range of tunable properties through further engineering the heterogeneities in 2D materials.
Investigation of Structural Phases in Mo 1-x W x Te 2 in STEM
Explore the source record for details and available documents.
Two-Dimensional Palladium Diselenide with Strong In-Plane Optical Anisotropy and High Mobility Grown by Chemical Vapor Deposition
Two-dimensional (2D) palladium diselenide (PdSe 2 ) has strong interlayer coupling and a puckered pentagonal structure, leading to remarkable layer-dependent electronic structures and highly anisotropic in-plane optical and electronic properties. However, the lack of high-quality, 2D PdSe 2 crystals grown by bottom-up approaches limits the study of their exotic properties and practical applications. In this work, chemical vapor deposition growth of highly crystalline few-layer (≥2 layers) PdSe 2 crystals on various substrates is reported. The high quality of the PdSe 2 crystals is confirmed by low-frequency Raman spectroscopy, scanning transmission electron microscopy, and electrical characterization. In addition, strong in-plane optical anisotropy is demonstrated via polarized Raman spectroscopy and second-harmonic generation maps of the PdSe 2 flakes. A theoretical model based on kinetic Wulff construction theory and density functional theory calculations is developed and described the observed evolution of “square=like” shaped PdSe 2 crystals into rhombus due to the higher nucleation barriers for stable attachment on the (1,1) and (1,-1) edges, which results in their slower growth rates. Finally, few-layer PdSe 2 field-effect transistors reveal tunable ambipolar charge carrier conduction with an electron mobility up to ≈294 cm 2 V -1 s -1 , which is comparable to that of exfoliated PdSe 2 , indicating the promise of this anisotropic 2D material for electronics.