Search NASA⌕ Search

Engineering topics

Calvin, Katherine V.

Publications and source records attributed to Calvin, Katherine V..

Scenario Discovery Analysis of Drivers of Solar and Wind Energy Transitions Through 2050

Deep human-Earth system uncertainties and strong multi-sector dynamics make it difficult to anticipate which conditions are most likely to lead to higher or lower adoption of renewable energy, and models project a broad range of future solar and wind energy shares across future scenarios. To elucidate these dynamics, we explore a large data set of scenarios simulated from the Global Change Analysis Model (GCAM) and use scenario discovery to identify the most significant factors affecting solar and wind adoption by mid-century. We generated a data set of over 4,000 scenarios from GCAM by varying 12 different socioeconomic factors at high and low levels, including assumptions about future energy demand, resource costs, and fossil fuel emissions paths, as well as specific technology assumptions including wind and solar backup requirements and storage costs. Using scenario discovery, we assess the most important factors globally and regionally in creating high fractions of solar and wind energy and explore interconnected effects on other systems including water and non-CO 2 emissions. Globally and regionally, we found that solar and wind-related technology costs were the primary drivers of high wind and solar energy adoption, though a few regions depend heavily on other parameters like carbon capture and storage costs, population and gross domestic product trajectories, and fossil fuel costs. We also identify four key paths to high solar and wind energy by mid-century and discuss their tradeoffs in terms of other outcomes.

14 SOLAR ENERGY↗

The Impact of Crop Rotation and Spatially Varying Crop Parameters in the E3SM Land Model (ELMv2)

Abstract Earth System Models (ESMs) are increasingly representing agriculture due to its impact on biogeochemical cycles, local and regional climate, and fundamental importance for human society. Realistic large scale simulations may require spatially varying crop parameters that capture crop growth at various scales and among different cultivars, as well as common crop management practices, but their importance is uncertain, and they are often not represented in ESMs. In this study, we examine the impact of using constant versus spatially varying crop parameters using a novel, realistic crop rotation scenario in the Energy Exascale Earth System Model (E3SM) Land Model version 2 (ELMv2). We implemented crop rotation by using ELMv2's dynamic land unit capability, and then calibrated and validated the model against observations collected at three AmeriFlux sites in the US Midwest with corn soybean rotation. The calibrated model closely captured the magnitude and observed seasonality of carbon and energy fluxes across crops and sites. We performed regional simulations for the US Midwest using the calibrated model and found that spatially varying only a few crop parameters across the region, as opposed to using constant parameters, had a large impact, with the carbon fluxes and energy fluxes both varying by up to 40%. These results imply that large scale ESM simulations using spatially invariant crop parameters may result in biased energy and carbon fluxes estimation from agricultural land, and underline the importance of improving human‐earth systems interactions in ESMs.

54 ENVIRONMENTAL SCIENCES↗

Modeling perennial bioenergy crops in the E3SM land model (ELMv2)

Perennial bioenergy crops are increasingly important for the production of ethanol and other renewable fuels, and as part of an agricultural system that alters the climate through its impact on biogeophysical and biogeochemical properties of the terrestrial ecosystem. Few earth system models (ESMs) represent such crops, however. In this study, we expand the Energy Exascale Earth System Model (E3SM) Land Model (ELMv2) to include perennial bioenergy crops with a high potential for mitigating climate change. We focus on high-productivity miscanthus and switchgrass, estimating various parameters associated with their different growth stages and performing a global sensitivity analysis to identify and optimize these parameters. The sensitivity analysis identifies five parameters associated with phenology, carbon/nitrogen allocation, stomatal conductance, and maintenance respiration as the most sensitive parameters for carbon and energy fluxes. We calibrated and validated the model against observations and found that the model closely captures the observed seasonality and the magnitude of carbon fluxes. The validated model represents the latent heat flux fairly well, but sensible heat flux for miscanthus is not well captured. Finally, we validated the model against observed leaf area index (LAI) and harvest amount and found modeled LAI captured observed seasonality , although the model underestimates LAI and harvest amount. This work provides a foundation for future ESM analyses of the interactions between perennial bioenergy crops and carbon, water, and energy dynamics in the larger earth system, and sets the stage for studying the impact of future biofuel expansion on climate and terrestrial systems.

09 BIOMASS FUELS↗

gdess: A framework for evaluating simulated atmospheric CO 2 in Earth System Models

Atmospheric carbon dioxide (CO 2 ) plays a key role in the global carbon cycle and global warming. Climate-carbon feedbacks are often studied and estimated using Earth System Models (ESMs), which couple together multiple model components—including the atmosphere, ocean, terrestrial biosphere, and cryosphere—to jointly simulate mass and energy exchanges within and between these components. Despite tremendous advances, model intercomparisons and benchmarking are aspects of ESMs that warrant further improvement (Fer et al., 2021; Smith et al., 2014). Such benchmarking is critical because comparing the value of state variables in these simulations against observed values provides evidence for appropriately refining model components; moreover, researchers can learn much about Earth system dynamics in the process (Randall et al., 2019). We introduce `gdess` (a.k.a., Greenhouse gas Diagnostics for Earth System Simulations), which parses observational datasets and ESM simulation output, combines them to be in a consistent structure, computes statistical metrics, and generates diagnostic visualizations. In its current incarnation, `gdess` facilitates evaluating a model's ability to reproduce observed temporal and spatial variations of atmospheric CO 2 . The diagnostics implemented modularly in `gdess` support more rapid assessment and improvement of model-simulated global CO 2 sources and sinks associated with land and ocean ecosystem processes. We intend for this set of automated diagnostics to form an extensible, open source framework for future comparisons of simulated and observed concentrations of various greenhouse gases across Earth system models.

97 MATHEMATICS AND COMPUTING↗

Diurnal rainfall response to the physiological and radiative effects of CO 2 in tropical forests in the Energy exascale earth system model v1

Understanding how the connection between rainfall and tropical forests will respond to increasing CO$_2$ concentrations is a key element in understanding how the tropical water cycle will respond to increasing CO$_2$. The plant physiological and radiative impacts of CO$_2$ on rainfall patterns over tropical forest regions are examined in the Energy Exascale Earth System Model version 1.1 (E3SMv1.1-BGC) biogeochemistry experiments. Composite analysis reveals a dampening of the diurnal cycle of rainfall over the Amazon, Congo, and Maritime Continent in response to rising CO$_2$ levels, regardless of the sign of total rainfall change. A full factorial model experiment confirms that the CO$_2$ radiative and CO$_2$ plant physiological effects can individually or jointly reduce the magnitude of the rainfall diurnal cycle, though the physical pathway giving rise to the reduction differs between the two effects. For the physiological response, stomatal closure reduces evapotranspiration, which dries the boundary layer and raises the lifting condensation level. These effects combine to reduce deep convective rainfall during its peak occurrence in the late daytime to early nighttime period. For the radiative response, a relative reduction in daytime CAPE (consistent with a reduction in the diurnal temperature range) leads to less frequent triggering of deep convection and a reduction of rainfall diurnal amplitude. These diurnal rainfall changes are structurally similar across seasons, and show little sensitivity to representation of nutrient coupling for the land biogeochemistry. In agreement with previous findings, the physiological response has only minor impact on extreme rainfall relative to the radiative response.

54 ENVIRONMENTAL SCIENCES↗

A Crop Yield Change Emulator for Use in GCAM and Similar Models: Persephone v1.0

Future changes in Earth system state will impact agricultural yields and, through these changed yields, can have profound impacts on the global economy. Global gridded crop models estimate the influence of these Earth system changes on future crop yields but are often too computationally intensive to dynamically couple into global multisector economic models, such as the Global Change Assessment Model (GCAM) and other similar-in-scale models. Yet, generalizing a faster site-specific crop model’s results to be used globally will introduce inaccuracies, and the question of which model to use is unclear given the wide variation in yield response across crop models. To examine the feedback loop among socioeconomics, Earth system changes, and crop yield changes, rapidly generated yield responses with some quantification of crop response uncertainty are desirable. The Persephone v1.0 response functions presented in this work are based on the Agricultural Model Intercomparison and Improvement Project (AgMIP) Coordinated Climate-Crop Modeling Project (C3MP) sensitivity test data set and are focused on providing GCAM and similar models with a tractable number of rapid to evaluate dynamic yield response functions corresponding to a range of the yield response sensitivities seen in the C3MP data set. With the Persephone response functions, a new variety of agricultural impact experiments will be open to GCAM and other economic models: for example, examining the economic impacts of a multi-year drought in a key agricultural region and how economic changes in response to the drought can, in turn, impact the drought.

Snyder, Abigail↗