Engineering topics

Campbell, Charles E., Jr.

Publications and source records attributed to Campbell, Charles E., Jr..

3 records

NASA NTRS2006

Using Doppler Shifts of GPS Signals To Measure Angular Speed

A method has been proposed for extracting information on the rate of rotation of an aircraft, spacecraft, or other body from differential Doppler shifts of Global Positioning System (GPS) signals received by antennas mounted on the body. In principle, the method should be capable of yielding low-noise estimates of rates of rotation. The method could eliminate the need for gyroscopes to measure rates of rotation. The method is based on the fact that for a given signal of frequency ft transmitted by a given GPS satellite, the differential Doppler shift is attributable to the difference between those components of the instantaneous translational velocities of the antennas that lie along the line of sight from the antennas to the GPS satellite.

Campbell, Charles E., Jr.↗

NASA NTRS1993

Adaptive control of a Stewart platform-based manipulator

A joint-space adaptive control scheme for controlling noncompliant motion of a Stewart platform-based manipulator (SPBM) was implemented in the Hardware Real-Time Emulator at Goddard Space Flight Center. The six-degrees of freedom SPBM uses two platforms and six linear actuators driven by dc motors. The adaptive control scheme is based on proportional-derivative controllers whose gains are adjusted by an adaptation law based on model reference adaptive control and Liapunov direct method. It is concluded that the adaptive control scheme provides superior tracking capability as compared to fixed-gain controllers.

Nguyen, Charles C.↗

NASA NTRS1992

On Capaciflector sensor data interpretation using the constrained deconvolution algorithm

The Capaciflector, a capacitive proximity sensor, is being developed by NASA for collision avoidance. Capaciflector provides a single output value as measure of altered base frequency. This value is a characteristic of an external object in the sensor's field of view. An attempt is made to use the Capaciflector for imaging with operating range from 1 to 2 inches. By positional arangement of sensors in a grid pattern and electronic activation of sensors over the grid one at a time an object characteristic image is obtained. The article describes the Capaciflector experimental imaging system and preliminary results obtained by the system.

Campbell, Charles E., Jr.↗