Search NASA⌕ Search

Engineering topics

Campbell, Joe C.

Publications and source records attributed to Campbell, Joe C..

Dynamic-quenching of a single-photon avalanche photodetector using an adaptive resistive switch

One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al 2 O 3 /Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10× smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.

42 ENGINEERING↗

Breakdown mechanisms and reverse current-voltage characteristics of organic bulk heterojunction solar cells and photodetectors

We investigate the reverse current-voltage characteristics and breakdown mechanisms of organic bulk heterojunction solar cells and photodetectors. Dark current and photo current measurements at different temperatures indicate that tunneling is the dominant mechanism at high reverse voltage. A band-to-band tunneling model that accommodates either Gaussian or exponential-parabolic density of states distributions is developed and used for simulations. At high reverse bias, the model explains the observed breakdown, which differs from the bias independent dark current behavior predicted by the Onsager-Braun model. At low reverse voltage, the incorporation of shunt resistance in the model provides good agreement between the measured reverse bias characteristics and simulations.

14 SOLAR ENERGY↗