Engineering topics

Canfield, Stephen L.

Publications and source records attributed to Canfield, Stephen L..

4 records

NASA NTRS2010

Similarity Rules for Scaling Solar Sail Systems

Future science missions will require solar sails on the order of 200 square meters (or larger). However, ground demonstrations and flight demonstrations must be conducted at significantly smaller sizes, due to limitations of ground-based facilities and cost and availability of flight opportunities. For this reason, the ability to understand the process of scalability, as it applies to solar sail system models and test data, is crucial to the advancement of this technology. This paper will approach the problem of scaling in solar sail models by developing a set of scaling laws or similarity criteria that will provide constraints in the sail design process. These scaling laws establish functional relationships between design parameters of a prototype and model sail that are created at different geometric sizes. This work is applied to a specific solar sail configuration and results in three (four) similarity criteria for static (dynamic) sail models. Further, it is demonstrated that even in the context of unique sail material requirements and gravitational load of earth-bound experiments, it is possible to develop appropriate scaled sail experiments. In the longer term, these scaling laws can be used in the design of scaled experimental tests for solar sails and in analyzing the results from such tests.

Canfield, Stephen L.↗

NASA NTRS2006

Design Rules and Analysis of a Capture Mechanism for Rendezvous between a Space Tether and Payload

Momentum-exchange/electrodynamic reboost (MXER) tether systems have been proposed to serve as an "upper stage in space". A MXER tether station would boost spacecraft from low Earth orbit to a high-energy orbit quickly, like a high-thrust rocket. Then, it would slowly rebuild its orbital momentum through electrodynamic thrust, minimizing the use of propellant. One of the primary challenges in developing a momentum-exchange/electrodynamic reboost tether system as identified by the 2003 MXER Technology Assessment Group is in the development of a mechanism that will enable the processes of capture, carry and release of a payload by the rotating tether as required by the MXER tether approach. This paper will present a concept that will achieve the desired goals of the capture system. This solution is presented as a multi-DOF (degree-of-freedom) capture mechanism with nearly passive operation that features matching of the capture space and expected window of capture error, efficient use of mass and nearly passive actuation during the capture process. This paper will describe the proposed capture mechanism concept and provide an evaluation of the concept through a dynamic model and experimental tests performed on a prototype article of the mechanism in a dynamically similar environment. This paper will also develop a set of rules to guide the design of such a capture mechanism based on analytical and experimental analyses. The primary contributions of this paper will be a description of the proposed capture mechanism concept, a collection of rules to guide its design, and empirical and model information that can be used to evaluate the capability of the concept

Sorensen, Kirk F.↗

NASA NTRS2005

Multivariate Parameter Sets for Optimal Synthesis of Compliant Mechanisms

This paper will propose the use of control maps along with discretized elements or meshes in the design parameter set for optimizing compliant mechanisms. The use of control maps will be demonstrated to encode the motion of groups of nodes or control points within a compliant mechanism design with simple mapping rules. The technique will serve as an alternative to increased mesh size or node wandering techniques that have been proposed to increase the number of alternative design shapes that may be considered. As an alternative approach, the proposed control map parameterization has the significant benefit that it minimizes the number of design parameters necessary (parameters increase linearly with the mesh size) in describing a given design making it computationally efficient. A limited number of tiles can produce a map that has a significant effect on the final shape. If the tiles are chosen appropriately, the problems such as material overlap and non-convex mesh elements are avoided automatically. This paper will describe the implementation of these control maps and provide several examples showing their implementation in the compliant mechanism topology synthesis process.

Shibakov, Alex↗

NASA NTRS2004

Similarity Rules for Scaling Solar Sail Systems

Future science missions will require solar sails on the order 10,000 sq m (or larger). However, ground and flight demonstrations must be conducted at significantly smaller Sizes (400 sq m for ground demo) due to limitations of ground-based facilities and cost and availability of flight opportunities. For this reason, the ability to understand the process of scalability, as it applies to solar sail system models and test data, is crucial to the advancement of this technology. This report will address issues of scaling in solar sail systems, focusing on structural characteristics, by developing a set of similarity or similitude functions that will guide the scaling process. The primary goal of these similarity functions (process invariants) that collectively form a set of scaling rules or guidelines is to establish valid relationships between models and experiments that are performed at different orders of scale. In the near term, such an effort will help guide the size and properties of a flight validation sail that will need to be flown to accurately represent a large, mission-level sail.

Canfield, Stephen L.↗