Search NASA⌕ Search

Engineering topics

Cao, Mingfeng

Publications and source records attributed to Cao, Mingfeng.

At least 19 records

Data for "Adsorptive Separation and Recovery of Triacetic Acid Lactone from Fermentation Broth"

Triacetic acid lactone (TAL) can be microbially produced and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $4.27/kg [$3.71−4.94/kg; 5th-95th percentiles] for the current state of technology and $2.83/kg [$2.46–3.29/kg] following potential near-term improvements to fermentation. Thus, this work provides an adsorptive process to recover microbially produced TAL that can be chemically upgraded to several industrial products.

Bioproducts↗

Next-Generation Sequencing Data from a CUT&RUN Study of R. toruloides IFO0880 Cse4 and Orc1 Binding Sites

Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

Genome Engineering↗

Self-Buffering system for Cost-Effective production of lactic acid from glucose and xylose using Acid-Tolerant Issatchenkia orientalis

This study presents a cost-effective strategy for producing organic acids from glucose and xylose using the acid- tolerant yeast, Issatchenkia orientalis. I. orientalis was engineered to produce lactic acid from xylose, and the resulting strain, SD108XL, successfully converted sorghum hydrolysates into lactic acid. In order to enable low- pH fermentation, a self-buffering strategy, where the lactic acid generated by the SD108XL strain during fermentation served as a buffer, was developed. As a result, the SD108 strain produced 67 g/L of lactic acid from 73 g/L of glucose and 40 g/L of xylose, simulating a sugar composition of sorghum biomass hydrolysates. Moreover, techno-economic analysis underscored the efficiency of the self-buffering strategy in streamlining the downstream process, thereby reducing production costs. These results demonstrate the potential of I. orientalis as a platform strain for the cost-effective production of organic acids from cellulosic hydrolysates.

59 BASIC BIOLOGICAL SCIENCES↗

Data for Self-Buffering System for Cost-Effective Production of Lactic Acid from Glucose and Xylose Using Acid-Tolerant Issatchenkia orientalis

This study presents a cost-effective strategy for producing organic acids from glucose and xylose using the acid-tolerant yeast, Issatchenkia orientalis . I. orientalis was engineered to produce lactic acid from xylose, and the resulting strain, SD108XL, successfully converted sorghum hydrolysates into lactic acid. In order to enable low-pH fermentation, a self-buffering strategy, where the lactic acid generated by the SD108XL strain during fermentation served as a buffer, was developed. As a result, the SD108 strain produced 67 g/L of lactic acid from 73 g/L of glucose and 40 g/L of xylose, simulating a sugar composition of sorghum biomass hydrolysates. Moreover, techno-economic analysis underscored the efficiency of the self-buffering strategy in streamlining the downstream process, thereby reducing production costs. These results demonstrate the potential of I. orientalis as a platform strain for the cost-effective production of organic acids from cellulosic hydrolysates.

Conversion↗

Mass Spectrometry-Based High-Throughput Quantification of Bioproducts in Liquid Culture

To meet the ever-increasing need for high-throughput screening in metabolic engineering, information-rich, fast screening methods are needed. Mass spectrometry (MS) provides an efficient and general approach for metabolite screening and offers the capability of characterizing a broad range of analytes in a label-free manner, but often requires a range of sample clean-up and extraction steps. Liquid extraction surface analysis (LESA) coupled MS is an image-guided MS surface analysis approach that directly samples and introduces metabolites from a surface to MS. Here, we combined the advantages of LESA–MS and an acoustic liquid handler with stable isotope-labeled internal standards. This approach provides absolute quantitation of target chemicals from liquid culture-dried droplets and enables high-throughput quantitative screening for microbial metabolites. In this paper, LESA–MS was successfully applied to quantify several different metabolites (itaconic acid, triacetic acid lactone, and palmitic acid) from different yeast strains in different mediums, demonstrating its versatility, accuracy, and efficiency across a range of microbial engineering applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorptive separation and recovery of triacetic acid lactone from fermentation broth

Triacetic acid lactone (TAL), an emerging bioprivileged molecule, can be produced microbially and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $\$4.27$/kg ($\$3.71$–4.94/kg; 5th–95th percentiles) given the current state of technology and $\$2.83$/kg ($\$2.46$–3.29/kg) following potential near-term improvements to fermentation. This work provides an adsorptive process for the recovery of microbially produced TAL that can be upgraded chemically to a range of industrial products.

09 BIOMASS FUELS↗

BioSTEAMDevelopmentGroup/Bioindustrial-Park/TAL

Triacetic acid lactone (TAL) can be microbially produced and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $4.27/kg [$3.71−4.94/kg; 5th-95th percentiles] for the current state of technology and $2.83/kg [$2.46–3.29/kg] following potential near-term improvements to fermentation. Thus, this work provides an adsorptive process to recover microbially produced TAL that can be chemically upgraded to several industrial products.

Cortes-Peña, Yoel↗

Metabolic engineering of oleaginous yeast Rhodotorula toruloides for overproduction of triacetic acid lactone

Abstract The plant‐sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2‐pyrone synthase gene from Gerbera hybrida ( GhPS ) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl‐CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP‐citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl‐CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12‐ ACL1‐ACC1 using fed‐batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl‐CoA‐derived polyketides from low‐cost carbon sources.

2‐pyrone synthase↗

Data for Metabolic Engineering of Oleaginous Yeast Rhodotorula toruloides for Overproduction of Triacetic Acid Lactone

The plant-sourced polyketide triacetic acid lactone (TAL) has been recognized as a promising platform chemical for the biorefinery industry. However, its practical application was rather limited due to low natural abundance and inefficient cell factories for biosynthesis. Here, we report the metabolic engineering of oleaginous yeast Rhodotorula toruloides for TAL overproduction. We first introduced a 2-pyrone synthase gene from Gerbera hybrida (GhPS) into R. toruloides and investigated the effects of different carbon sources on TAL production. We then systematically employed a variety of metabolic engineering strategies to increase the flux of acetyl-CoA by enhancing its biosynthetic pathways and disrupting its competing pathways. We found that overexpression of ATP-citrate lyase (ACL1) improved TAL production by 45% compared to the GhPS overexpressing strain, and additional overexpression of acetyl-CoA carboxylase (ACC1) further increased TAL production by 29%. Finally, we characterized the resulting strain I12-ACL1-ACC1 using fed-batch bioreactor fermentation in glucose or oilcane juice medium with acetate supplementation and achieved a titer of 28 or 23 g/L TAL, respectively. This study demonstrates that R. toruloides is a promising host for the production of TAL and other acetyl-CoA-derived polyketides from low-cost carbon sources.

Conversion↗

CUT&RUN identifies centromeric DNA regions of Rhodotorula toruloides IFO0880

ABSTRACT Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

59 BASIC BIOLOGICAL SCIENCES↗

Revisiting the unique structure of autonomously replicating sequences in Yarrowia lipolytica and its role in pathway engineering

Production of industrially relevant compounds in microbial cell factories can employ either genomes or plasmids as an expression platform. Selection of plasmids as pathway carriers is advantageous for rapid demonstration but poses a challenge of stability. Yarrowia lipolytica has attracted great attention in the past decade for the biosynthesis of chemicals related to fatty acids at titers attractive to industry, and many genetic tools have been developed to explore its oleaginous potential. Here, our recent studies on the autonomously replicating sequences (ARSs) of nonconventional yeasts revealed that the ARSs from Y. lipolytica showcase a unique structure that includes a previously unannotated sequence (spacer) linking the origin of replication (ORI) and the centromeric (CEN) element and plays a critical role in modulating plasmid behavior. Maintaining a native 645-bp spacer yielded a 2.2-fold increase in gene expression and 1.7-fold higher plasmid stability compared to a more universally employed minimized ARS. Testing the modularity of the ARS sub-elements indicated that plasmid stability exhibits a pronounced cargo dependency. Instability caused both plasmid loss and intramolecular rearrangements. Altogether, our work clarifies the appropriate application of various ARSs for the scientific community and sheds light on a previously unexplored DNA element as a potential target for engineering Y. lipolytica.

59 BASIC BIOLOGICAL SCIENCES↗

Unlocking nature’s biosynthetic potential by directed genome evolution

Microorganisms have been increasingly explored as microbial cell factories for production of fuels, chemicals, drugs, and materials. Among the various metabolic engineering strategies, directed genome evolution has emerged as one of the most powerful tools to unlock the full biosynthetic potential of microorganisms. Furthermore we summarize the directed genome evolution strategies that have been developed in recent years, including adaptive laboratory evolution and various targeted genome-scale engineering strategies, and discuss their applications in basic and applied biological research.

59 BASIC BIOLOGICAL SCIENCES↗

Integrating biocatalysis with chemocatalysis for selective transformations

The integration of biocatalysis with chemocatalysis combines the excellent selectivity of the former with the robust reactivity of the latter and offers many advantages, such as lower cost, higher yield, enhanced selectivity, as well as less waste generation. Despite the challenge of incompatibilities between different classes of catalysts, recent advances in synthetic chemistry and biology provide ample opportunities for multistep cascade transformations that combine biocatalysis and chemocatalysis. In this research, we review recent progress in merging biocatalysis with chemocatalysis, highlighting selected examples of photo-/electricity-driven biotransformations and recently developed strategies for addressing the catalyst incompatibility issue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A genetic toolbox for metabolic engineering of Issatchenkia orientalis

The nonconventional yeast Issatchenkia orientalis can grow under highly acidic conditions and has been explored for production of various organic acids. Yet, its broader application is hampered by the lack of efficient genetic tools to enable sophisticated metabolic manipulations. We recently constructed an episomal plasmid based on the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) in I. orientalis and developed a CRISPR/Cas9 system for multiplexed gene deletions. Here we report three additional genetic tools including: (1) identification of a 0.8 kb centromere-like (CEN-L) sequence from the I. orientalis genome by using bioinformatics and functional screening; (2) discovery and characterization of a set of constitutive promoters and terminators under different culture conditions by using RNA-Seq analysis and a fluorescent reporter; and (3) development of a rapid and efficient in vivo DNA assembly method in I. orientalis, which exhibited ~100% fidelity when assembling a 7 kb-plasmid from seven DNA fragments ranging from 0.7 kb to 1.7 kb. As evidence of concept, we used these genetic tools to rapidly construct a functional xylose utilization pathway in I. orientalis.

59 BASIC BIOLOGICAL SCIENCES↗

Data from A Genetic Toolbox for Metabolic Engineering of Issatchenkia orientalis

The nonconventional yeast Issatchenkia orientalis can grow under highly acidic conditions and has been explored for production of various organic acids. However, its broader application is hampered by the lack of efficient genetic tools to enable sophisticated metabolic manipulations. We recently constructed an episomal plasmid based on the autonomously replicating sequence (ARS) from Saccharomyces cerevisiae (ScARS) in I. orientalis and developed a CRISPR/Cas9 system for multiplexed gene deletions. Here we report three additional genetic tools including: (1) identification of a 0.8 kb centromere-like (CEN-L) sequence from the I. orientalis genome by using bioinformatics and functional screening; (2) discovery and characterization of a set of constitutive promoters and terminators under different culture conditions by using RNA-Seq analysis and a fluorescent reporter; and (3) development of a rapid and efficient in vivo DNA assembly method in I. orientalis , which exhibited ~100% fidelity when assembling a 7 kb-plasmid from seven DNA fragments ranging from 0.7 kb to 1.7 kb. As proof of concept, we used these genetic tools to rapidly construct a functional xylose utilization pathway in I. orientalis .

Conversion↗

Multi-functional genome-wide CRISPR system for high throughput genotype–phenotype mapping

Abstract Genome-scale engineering is an indispensable tool to understand genome functions due to our limited knowledge of cellular networks. Unfortunately, most existing methods for genome-wide genotype–phenotype mapping are limited to a single mode of genomic alteration, i.e. overexpression, repression, or deletion. Here we report a multi-functional genome-wide CRISPR (MAGIC) system to precisely control the expression level of defined genes to desired levels throughout the whole genome. By combining the tri-functional CRISPR system and array-synthesized oligo pools, MAGIC is used to create, to the best of our knowledge, one of the most comprehensive and diversified genomic libraries in yeast ever reported. The power of MAGIC is demonstrated by the identification of previously uncharacterized genetic determinants of complex phenotypes, particularly those having synergistic interactions when perturbed to different expression levels. MAGIC represents a powerful synthetic biology tool to investigate fundamental biological questions as well as engineer complex phenotypes for biotechnological applications.

59 BASIC BIOLOGICAL SCIENCES↗

Development of a CRISPR/Cas9-Based Tool for Gene Deletion in Issatchenkia orientalis

Microbial production of fuels and chemicals from renewable and readily available biomass is a sustainable and economically attractive alternative to petroleum-based production. Because of its unusual tolerance to highly acidic conditions, I. orientalis is a promising potential candidate for the manufacture of valued organic acids. Nevertheless, reliable and efficient genetic engineering tools in I. orientalis are limited. The results outlined in this paper describe a stable episomal ARS-containing plasmid and the first CRISPR/Cas9-based system for gene disruptions in I. orientalis , paving the way for applying genome engineering and metabolic engineering strategies and tools in this microorganism for production of fuels and chemicals.

59 BASIC BIOLOGICAL SCIENCES↗