Search NASA⌕ Search

Engineering topics

Cao, Yang

Publications and source records attributed to Cao, Yang.

25 records · Page 2

Multisource inverse-geometry CT. Part II. X-ray source design and prototype

Purpose: This paper summarizes the development of a high-power distributed x-ray source, or “multisource,” designed for inverse-geometry computed tomography (CT) applications [see B. De Man et al., “Multisource inverse-geometry CT. Part I. System concept and development,” Med. Phys. 43, 4607–4616 (2016)]. The paper presents the evolution of the source architecture, component design (anode, emitter, beam optics, control electronics, high voltage insulator), and experimental validation. Methods: Dispenser cathode emitters were chosen as electron sources. A modular design was adopted, with eight electron emitters (two rows of four emitters) per module, wherein tungsten targets were brazed onto copper anode blocks—one anode block per module. A specialized ceramic connector provided high voltage standoff capability and cooling oil flow to the anode. A matrix topology and low-noise electronic controls provided switching of the emitters. Results: Four modules (32 x-ray sources in two rows of 16) have been successfully integrated into a single vacuum vessel and operated on an inverse-geometry computed tomography system. Dispenser cathodes provided high beam current (>1000 mA) in pulse mode, and the electrostatic lenses focused the current beam to a small optical focal spot size (0.5 × 1.4 mm). Controlled emitter grid voltage allowed the beam current to be varied for each source, providing the ability to modulate beam current across the fan of the x-ray beam, denoted as a virtual bowtie filter. The custom designed controls achieved x-ray source switching in <1 μs. The cathode-grounded source was operated successfully up to 120 kV. Conclusions: A high-power, distributed x-ray source for inverse-geometry CT applications was successfully designed, fabricated, and operated. Future embodiments may increase the number of spots and utilize fast read out detectors to increase the x-ray flux magnitude further, while still staying within the stationary target inherent thermal limitations.

60 APPLIED LIFE SCIENCES↗

Discovery of Isonicotinamides as Highly Selective, Brain Penetrable, and Orally Active Glycogen Synthase Kinase-3 Inhibitors

GSK-3 is a serine/threonine kinase that has numerous substrates. Many of these proteins are involved in the regulation of diverse cellular functions, including metabolism, differentiation, proliferation, and apoptosis. Inhibition of GSK-3 may be useful in treating a number of diseases including Alzheimer’s disease (AD), type II diabetes, mood disorders, and some cancers, but the approach poses significant challenges. Here, we present a class of isonicotinamides that are potent, highly kinase-selective GSK-3 inhibitors, the members of which demonstrated oral activity in a triple-transgenic mouse model of AD. Here, the remarkably high kinase selectivity and straightforward synthesis of these compounds bode well for their further exploration as tool compounds and therapeutics.

60 APPLIED LIFE SCIENCES↗

DataONE: A Data Federation with Provenance Support

DataONE is a federated data network focusing on earth and environmental science data. We present the provenance and search features of DataONE by means of an example involving three earth scientists who interact through a DataONE Member Node. DataONE provenance systems enable reproducible research and facilitate proper attribution of scientific results transitively across generations of derived data products.

Cao, Yang↗

A Framework to Analyze the Performance of Load Balancing Schemes for Ensembles of Stochastic Simulations

Ensembles of simulations are employed to estimate the statistics of possible future states of a system, and are widely used in important applications such as climate change and biological modeling. Ensembles of runs can naturally be executed in parallel. However, when the CPU times of individual simulations vary considerably, a simple strategy of assigning an equal number of tasks per processor can lead to serious work imbalances and low parallel efficiency. This paper presents a new probabilistic framework to analyze the performance of dynamic load balancing algorithms for ensembles of simulations where many tasks are mapped onto each processor, and where the individual compute times vary considerably among tasks. Four load balancing strategies are discussed: most-dividing, all-redistribution, random-polling, and neighbor-redistribution. Simulation results with a stochastic budding yeast cell cycle model are consistent with the theoretical analysis. It is especially significant that there is a provable global decrease in load imbalance for the local rebalancing algorithms due to scalability concerns for the global rebalancing algorithms. The overall simulation time is reduced by up to 25 %, and the total processor idle time by 85 %.

ALGORITHMS↗

What is the effect of LiDAR-derived DEM resolution on large-scale watershed model results?

This paper examines the effect of raster cell size on hydrographic feature extraction and hydrological modeling using LiDAR derived DEMs. LiDAR datasets for three experimental watersheds were converted to DEMs at various cell sizes. Watershed boundaries and stream networks were delineated from each DEM and were compared to reference data. Hydrological simulations were conducted and the outputs were compared. Smaller cell size DEMs consistently resulted in less difference between DEM-delineated features and reference data. However, minor differences been found between streamflow simulations resulted for a lumped watershed model run at daily simulations aggregated at an annual average. These findings indicate that while higher resolution DEM grids may result in more accurate representation of terrain characteristics, such variations do not necessarily improve watershed scale simulation modeling. Hence the additional expense of generating high resolution DEM's for the purpose of watershed modeling at daily or longer time steps may not be warranted.

99 GENERAL AND MISCELLANEOUS↗

Co-evaporation of transition metal salt and SiO powder toward copper(or nickel)/silicon-contained composite nanostructures

Graphical abstract: Copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (nickel formate and copper sulfate). Display Omitted Highlights: ► Novel nanostructures were synthesized by co-evaporating SiO and metal salts. ► A pre-sintering process was used in the synthesis of copper/silicon nanocomposites. ► A Ni{sub 31}Si{sub 12}/Si/SiO{sub 2} nanocomposite was obtained. ► Peapod-like copper/silicon-contained nanocomposites were obtained. ► On the basis of experimental results, the formation mechanism was discussed. -- Abstract: We demonstrate that several novel copper(or nickel)/silicon-contained composite nanostructures were successfully synthesized by co-evaporating SiO powder and corresponding transition metal salts (transition metal organic salt and transition metal inorganic salt), including nickel formate, cobalt acetate, and copper sulfate. The morphologies, compositions, and crystal structures of products were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The results indicate that the morphology and composition of formed copper(or nickel)/silicon-contained composite nanostructures are dramatically influenced by the distance between SiO powder and transition metal salts, or by the pre-sintering temperature of the reactants. The possible formation mechanisms of these composite nanostructures were discussed on the basis of experimental observations.

36 MATERIALS SCIENCE↗

Solvation of Dimethyl Succinate in a Sodium Hydroxide Aqueous Solution. A Computational Study

Molecular dynamics simulations were carried out to study dimethyl-succinate/water/NaOH solutions. The potential of mean force method is used to determine the transport mechanism of a dimethyl-succinate (a diester) molecule across the aqueous/vapor interface. The computed number density profiles show a strong propensity for the diester molecules to congregate at the interface with the solubility of the diester increasing with increasing NaOH concentration. It is observed that the major contribution to the interfacial solvation free energy minimum is from van der Waals interactions. Thus, even at higher NaOH concentrations, the increasing electrostatic interaction between the diester and ions is not large enough to overcome the Lennard-Jones (LJ) interactions to favor the solvation of diester in bulk solutions. The calculated solvation free energies are found to be -2.6 ~ -3.5 kcal/mol in variant concentrations of NaOH aqueous solutions. These values are in qualitative agreement with the corresponding experimental measurements. The computed surface potential indicates that the contribution of diester molecules to the total surface potential is about 25%, with the major contribution from interfacial water molecules. This work was supported by the US Department of Energy (DOE) Office of Basic Energy Sciences, Chemical Sciences program. Pacific Northwest National Laboratory is operated by Battelle for DOE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗