Search NASA⌕ Search

Engineering topics

Capecelatro, Jesse

Publications and source records attributed to Capecelatro, Jesse.

Fast estimation of reaction rates in spherical and non-spherical porous catalysts

Here we present a methodology for modeling multi-step reaction rates in porous catalyst particles for use in CFD-DEM and two fluid models. Single-step effectiveness factors based on a Thiele modulus, while useful, cannot accurately capture the cascading reaction systems common in high temperature vapor-phase chemical reactors like fluidized catalytic cracking units and catalytic biomass fast pyrolysis systems. Instead, multi-step effectiveness vectors derived from steady-state solutions to the governing reaction-diffusion equations are needed. Solutions for various catalyst shapes are presented, including spheres, cylinders, and prisms. Computational challenges inherent in repeated evaluation of reaction rates with diffusion limitations are discussed, and an efficient implementation based on pre-computed lookup tables is proposed and demonstrated on a simulation of a fluidized bed reactor. Open-source code is provided for the compilation of reaction rate tables for use in ODE, DEM, and two-fluid models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sound and turbulence modulation by particles in high-speed shear flows

High-speed free-shear-flow turbulence, laden with droplets or particles, can radiate weaker pressure fluctuations than its unladen counterpart. In this study, Eulerian–Lagrangian simulations of high-speed temporally evolving shear layers laden with monodisperse, adiabatic, inertial particles are used to examine particle–turbulence interactions and their effect on radiated pressure fluctuations. An evolution equation for gas-phase pressure intensity is formulated for particle-laden flows, and local mechanisms of pressure changes are quantified over a range of Mach numbers and particle mass loadings. Particle–turbulence interactions alter the local pressure intensity directly via volume displacement (due to the flow of finite-size particles) and drag coupling (due to local slip velocity between phases), and indirectly through significant turbulence changes. The sound radiation intensity near subsonic mixing layers increases with mass loading, consistent with existing low Mach number theory. For supersonic flows, sound levels decrease with mass loading, consistent with trends observed in previous experiments. Particle-laden cases exhibit reduced turbulent kinetic energy compared to single-phase flow, providing one source of their sound changes; however, the subsonic flow does not support such an obvious source-to-sound decomposition to explain its sound intensity increase. Despite its decrease in turbulence intensity, the louder particle-laden subsonic flows show an increase in the magnitude and time-rate-of-change of fluid dilatation, providing a mechanism for its increased sound radiation. Contrasting this, the quieter supersonic particle-laden flows exhibit decreased gas-phase dilatation yet its time-rate-of-change is relatively insensitive to mass loading, supporting such a connection.

Mechanics↗

Machine learning-assisted early ignition prediction in a complex flow

Machine learning methods are used to improve the efficiency by which turbulence-resolved simulations predict whether a hydrogen jet in air crossflow will successfully ignite. The flush-mounted jet issues perpendicularly from the wall of a low-speed wind tunnel into a turbulent boundary layer wherein a laser-induced optical breakdown (LIB) hotspot is deposited. A detailed hydrogen chemical mechanism is used to model the radicals and any subsequent chemical reactions. A dielectric-barrier discharge actuator generates body forces and hydrogen radicals near the jet orifice. Here we focus on the success or not of the ignition based on LIB location. A challenge is that definitive determination of this requires long simulations, up to 440 µs after the LIB deposition. This is particularly expensive since multiple simulations are required to find the threshold. To reduce the computational effort, three short-time (91 µs) criteria are proposed, evaluated, and compared: a constructed criterion based on detailed observations of radicals near the stoichiometric surface and two machine learning approaches, each trained on 38 realizations. The constructed criterion provides a low-cost estimate of the ignition boundary that is unambiguous in 45 of the 50 training and test trials, so only 10% of them would need to be simulated longer. The trained neural networks correctly predict outcomes in all cases evaluated, with the more automated procedure—a convolutional neural network (CNN) trained on two-dimensional images—providing the most definitive outcome prediction. From the CNN, a sensitivity analysis is used to determine which kernel features from the two-dimensional input data, as defined by intermediate-layer network weights, are important for identifying ignition.

42 ENGINEERING↗

A purely Lagrangian method for simulating the shallow water equations on a sphere using smooth particle hydrodynamics

It has long been suggested that a purely Lagrangian solution to global-scale atmospheric/oceanic flows can potentially outperform tradition Eulerian schemes. Meanwhile, a demonstration of a scalable and practical framework remains elusive. Motivated by recent progress in particle-based methods when applied to convection dominated flows, this work presents a fully Lagrangian method for solving the inviscid shallow water equations on a rotating sphere in a smooth particle hydrodynamics framework. To avoid singularities at the poles, the governing equations are solved in Cartesian coordinates, augmented with a Lagrange multiplier to ensure that fluid particles are constrained to the surface of the sphere. An underlying grid in spherical coordinates is used to facilitate efficient neighbor detection and parallelization. The method is applied to a suite of canonical test cases, and conservation, accuracy, and parallel performance are assessed..

Computer Science↗

Verification of Eulerian-Eulerian and Eulerian-Lagrangian simulations for turbulent fluid-particle flows

Here, we present a verification study of three simulation techniques for fluid–particle flows, including an Euler–Lagrange approach (EL) inspired by Jackson's seminal work on fluidized particles, a quadrature–based moment method based on the anisotropic Gaussian closure (AG), and the traditional two-fluid model. We perform simulations of two problems: particles in frozen homogeneous isotropic turbulence (HIT) and cluster-induced turbulence (CIT). For verification, we evaluate various techniques for extracting statistics from EL and study the convergence properties of the three methods under grid refinement. The convergence is found to depend on the simulation method and on the problem, with CIT simulations posing fewer difficulties than HIT. Specifically, EL converges under refinement for both HIT and CIT, but statistics exhibit dependence on the postprocessing parameters. For CIT, AG produces similar results to EL. For HIT, converging both TFM and AG poses challenges. Overall, extracting converged, parameter-independent Eulerian statistics remains a challenge for all methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Euler-euler anisotropic gaussian mesoscale simulation of homogeneous cluster-induced gas-particle turbulence

An Euler–Euler anisotropic Gaussian approach (EE-AG) for simulating gas–particle flows, in which particle velocities are assumed to follow a multivariate anisotropic Gaussian distribution, is used to perform mesoscale simulations of homogeneous cluster-induced turbulence (CIT). A three-dimensional Gauss–Hermite quadrature formulation is used to calculate the kinetic flux for 10 velocity moments in a finite-volume framework. The particle-phase volume-fraction and momentum equations are coupled with the Eulerian solver for the gas phase. This approach is implemented in an open-source CFD package, OpenFOAM, and detailed simulation results are compared with previous Euler–Lagrange simulations in a domain size study of CIT. Here, these results demonstrate that the proposed EE-AG methodology is able to produce comparable results to EL simulations, and this moment-based methodology can be used to perform accurate mesoscale simulations of dilute gas–particle flows.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strongly coupled fluid-particle flows in vertical channels. I. Reynolds-averaged two-phase turbulence statistics

Simulations of strongly coupled (i.e., high-mass-loading) fluid-particle flows in vertical channels are performed with the purpose of understanding the fundamental physics of wall-bounded multiphase turbulence. The exact Reynolds-averaged (RA) equations for high-mass-loading suspensions are presented, and the unclosed terms that are retained in the context of fully developed channel flow are evaluated in an Eulerian–Lagrangian (EL) framework for the first time. A key distinction between the RA formulation presented in the current work and previous derivations of multiphase turbulence models is the partitioning of the particle velocity fluctuations into spatially correlated and uncorrelated components, used to define the components of the particle-phase turbulent kinetic energy (TKE) and granular temperature, respectively. The adaptive spatial filtering technique developed in our previous work for homogeneous flows [J. Capecelatro, O. Desjardins, and R. O. Fox, “Numerical study of collisional particle dynamics in cluster-induced turbulence,” J. Fluid Mech. 747, R2 (2014)] is shown to accurately partition the particle velocity fluctuations at all distances from the wall. Strong segregation in the components of granular energy is observed, with the largest values of particle-phase TKE associated with clusters falling near the channel wall, while maximum granular temperature is observed at the center of the channel. The anisotropy of the Reynolds stresses both near the wall and far away is found to be a crucial component for understanding the distribution of the particle-phase volume fraction. In Part II of this paper, results from the EL simulations are used to validate a multiphase Reynolds-stress turbulence model that correctly predicts the wall-normal distribution of the two-phase turbulence statistics.

42 ENGINEERING↗

Adjoint-based sensitivity analysis of localized ignition in a non-premixed hydrogen-air mixing layer

A space-time discrete-adjoint method recently developed for high-fidelity compressible turbulence simulations is extended to chemically-reacting mixtures for the purpose of measuring sensitivity of localized ignition in a non-premixed hydrogen-air mixing layer. The ignition source is modeled as a source in the energy equation, which introduces several parameters that need to be chosen with care. Because ignition is inherently discontinuous in parameter space (i.e., it succeeds or fails after some period), the resulting gradients in modeling parameters are ill-defined near its threshold. To this end, a cost functional is designed to provide short-time sensitivity in concert with an indicator function that informs whether or not successful ignition has occurred. The corresponding sensitivity is used in a line-search algorithm to identify a point on the ignition boundary in high-dimensional parameter space (7 dimensional in our 7-parameter demonstration). This is used to quantify the relative importance of parameters on ignition.

Capecelatro, Jesse↗