Search NASA⌕ Search

Engineering topics

Capote, Roberto

Publications and source records attributed to Capote, Roberto.

At least 19 records

Microscopic modeling of direct pre-equilibrium emission: Impact on exclusive and inclusive (n, x n) and fission channels

We report on a microscopic modeling of the first order of multistep direct emission based on one phonon excitations, given by the QRPA model, and an effective in-medium nucleon nucleon interaction, described within the JLM folding model. The results of our coupled channels framework for deformed target are illustrated in the case of low energy discrete state excitations in 152 Sm. Pre-equilibrium predictions and their impact on inclusive and exclusive (n,xn) cross sections and fission cross sections are discussed for actinides. We discuss the importance of i) collective excitations to describe the neutron emission spectra and of ii) spin distribution of the residual nucleus formed after the neutron pre-equilibrium emission, that is a key ingredient to model the residual nucleus decay.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Monte Carlo evaluation of the semiclassical multi-step direct reaction series

We show how the multi-step direct reaction series can be evaluated using Monte Carlo methods. Nucleon-nucleon collisions occur according to the random selection of a nucleon’s attenuation factor along its classical trajectory. The particles and hole excited in a collision are selected from a local Fermi distribution. We assume that the particles continue to propagate and possibly collide again before leaving the nucleus. We assume that holes collide in place, to possibly produce other particles and holes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Templates of expected measurement uncertainties

The covariance committee of CSEWG (Cross Section Evaluation Working Group) established templates of expected measurement uncertainties for neutron-induced total, (n,γ), neutron-induced charged-particle, and (n,xn) reaction cross sections as well as prompt fission neutron spectra, average prompt and total fission neutron multiplicities, and fission yields. Templates provide a list of what uncertainty sources are expected for each measurement type and observable, and suggest typical ranges of these uncertainties and correlations based on a survey of experimental data, associated literature, and feedback from experimenters. Information needed to faithfully include the experimental data in the nuclear-data evaluation process is also provided. These templates could assist (a) experimenters and EXFOR compilers in delivering more complete uncertainties and measurement information relevant for evaluations of new experimental data, and (b) evaluators in achieving a more comprehensive uncertainty quantification for evaluation purposes. This effort might ultimately lead to more realistic evaluated covariances for nuclear-data applications. In this topical issue, we cover the templates coming out of this CSEWG effort–typically, one observable per paper. This paper here prefaces this topical issue by introducing the concept and mathematical framework of templates, discussing potential use cases, and giving an example of how they can be applied (estimating missing experimental uncertainties of 235 U(n,f) average prompt fission neutron multiplicities), and their impact on nuclear-data evaluations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Database work for the new cross section standards evaluation

An effort is now underway to produce a new evaluation of the neutron standards. It is important to maintain experimental programs to increase the quality and extend the database for the neutron cross section standards in order to improve evaluations of them that will be used to convert cross section measurements made relative to those standards. Measurements have been made for most of the standard cross sections since the last evaluation of the standards. The improved database includes the cross sections for the H(n,n), 6Li(n,t), 10B(n,αγ), 10B(n,α), C(n,n), Au(n,γ), 235U(n,f) and 238U(n,f) standard reactions and ratios among them. The database also includes the 238U(n,γ) and 239Pu(n,f) cross sections in addition to the standard cross sections. Those data were included since there are many ratio measurements of those cross sections with the standards and absolute data are available for them.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Manhattan Project 1940s research on the prompt fission neutron spectrum

We describe how the prompt fission neutron spectrum (PFNS) was determined for the Manhattan Project at Los Alamos. Early work before World War II at American and British universities is described, together with theoretical work by Feather at Cambridge and Bethe at Los Alamos. As the Manhattan Project was being planned in 1942, two experiments on natural uranium were commissioned that proved to be influential: 1) An integral experiment at Chicago by Christy and Manley that accurately determined the average PFNS spectrum energy, 2.2 ± 0.2 MeV; 2) Bloch and Staub’s Stanford cyclotron measurement of the PFNS spectrum, which obtained an average energy of 1.70 ± 0.34 MeV. These two papers, previously unavailable outside of Los Alamos, are reproduced in the Supplementary Appendix. From these data, at the beginning of the project in 1943 Serber estimated an average 235 U PFNS energy of 2 MeV, and indeed this agrees with today’s best estimate. The challenges facing the scientists involved both the availability of only very small samples of enriched uranium and plutonium targets, and fast neutron detection technologies. During the project, 235 U and 239 Pu PFNS were measured by Nicodemus and Staub. These also proved to be quite accurate and gave an average spectrum energy of 2 MeV for 235 U. [This is not reproduced in the Appendix because it was published after the war in Physical Review 89, 1288 (1953)]. New methods were developed to enable more accurate measurements, and this paper describes how the PFNS was determined surprisingly well by 1945. We end by describing the post-war measurements in the 50s, including the PFNS data used by Ford and Wheeler in their simulations in 1951, the Bonner 1952 data, the seminal 1952 Watt paper with a new empirical parametrization of the PFNS, and the accurate PFNS measurement undertaken at Los Alamos by Cranberg et al. in 1956. We compare the measurements with our best understanding today as embodied in the Evaluated Nuclear Data File ENDF/B-VIII.0. Some images from historical documents in our Los Alamos National Security Research Center (NSRC) archives are shown.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Low-Energy Reactions of the n+ 233 U Nuclear Compound System and Its Initial Validation

The strong negative gradient as a function of the epithermal fission fraction (FEPIT) observed in both Evaluated Nuclear Data File (ENDF)/B-VII.1 and ENDF/B-VIII.0 nuclear data libraries poses new challenges for the verification of the n+ 233 U nuclear compound system, especially in the low energy range. The aim of this paper is to summarize the steps forward to consistently update the 233 U evaluated nuclear data to attain improved performance in benchmark calculations; this work is described in detail in a forthcoming paper by Pigni et al.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of U 238 ( n , n ' γ ) cross section data and their impact on reaction models

A better knowledge of (n,xn) reaction cross sections is important for both reaction modeling and energy applications. This article focuses on inelastic scattering of neutrons off 238 U for which improvements are needed to better constrain evaluations and solve inconsistencies in nuclear power reactor calculations. A new precise measurement of (n,xnγ) reaction cross sections on 238 U has been performed at the GELINA (Geel Electron LINear Accelerator) neutron facility operated by EC-JRC-Geel (Belgium) with the GRAPhEME (GeRmanium array for Actinides PrEcise MEasurements) setup. The prompt γ-ray spectroscopy method coupled to time-of-flight measurements is used to extract (n,xnγ) cross section values which can be further combined to infer the total neutron inelastic scattering cross section. Cross section data for 18 γ transitions (five never measured before) are presented and compared to the data in the literature. Here, emphasis is especially given to the uncertainty determination to produce partial cross section data as accurate as possible. Due to intrinsic limitations of the experimental method, the use of additional nuclear structure information coupled with theoretical modeling is required to determine the total (n, n') cross section over the whole neutron energy range. We have investigated modeling aspects of the 238 U(n,n'γ) cross sections related to the description of compound nucleus and preequilibirum mechanisms as well as the discrete part of nuclear structure. Through comparison between experimental and calculated (n,n'γ) cross sections, we pinpoint inaccuracies in the description of specific reaction mechanisms and challenge recently implemented models. This helps improving the whole modeling of the (n, n') reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Which nuclear data can be validated with LLNL pulsed-sphere experiments?

It is shown here that 14-MeV D+T LLNL pulsed-sphere experiments bring complementary information into the process of validating nuclear data compared to experiments that are traditionally used for this purpose—such as critical assemblies. To be more specific, the 14-MeV D+T LLNL pulsed-sphere neutron-leakage spectra enable to validate scattering and fission nuclear data up to 15 MeV (compared to approximately up to 5 MeV when using criticality experiments) and employ to this end simple compound targets containing only few isotopes. In this work, sensitivity profiles of the spectra to nuclear data are calculated in order to understand in detail which isotopes, observables, and energy ranges of nuclear data contribute significantly to their simulation. These profiles are presented for a few selected spheres containing 16 O, 12 C, 56 Fe, and 239 Pu. It is shown that the neutron-leakage spectra of spheres containing light elements are mostly sensitive to elastic- and inelastic-scattering cross sections on discrete levels and corresponding angular distributions. Spheres of structural materials are sensitive to elastic- and inelastic-scattering cross sections, including scattering on discrete levels and the continuum, and double-differential cross sections. Actinide spheres are also strongly sensitive to the fission observables, in particular to the total-fission neutron spectrum. Thin spheres (in which neutrons experience on average less than one scatter) are mostly sensitive to data near the elastic peak, in the energy range from 12–15 MeV, while thicker ones can be sensitive to data at lower incident-neutron energies due to multiple-scattering effects. This information is brought together with simulations of 71 pulsed-sphere neutron-leakage spectra using the ENDF/B-VII.1 and ENDF/B-VIII.0 nuclear-data libraries. This analysis highlights ENDF/B-VIII.0 data that could be further investigated for potential shortcomings ( 6 Li, 12 C, 16 O, 24-26 Mg, 27 Al, 48 Ti, 56 Fe, and 208 Pb) or are likely reliable ( 1,2 H, 7 Li, 9 Be, 14 N, 235,238 U, and 239 Pu) as indicated by validating with LLNL pulsed-sphere experiments.

14-MeV D+T LLNL pulsed-sphere neutron-leakage spec↗

Updating Fission Yield Data for Applications (Summary Report)

The First Research Coordination Meeting of the CRP on “Updating Fission Yield Data for Applications” was held by video conference from 31 August to 4 September 2020 with more than 50 international experts from 16 countries attending the meeting. The CRP is devoted to evaluation efforts of cumulative and independent fission yields for incident energies from the thermal point up to 14 MeV on actinide targets. Produced fission yield evaluations should include full uncertainty quantification and are expected to combine available experimental data and state-of-art model information. Four working groups were created within the collaboration: 1) Availability of experimental fission product yield data for evaluations; 2) New fission product yield experimental data; 3) Fission product yield evaluation; and 4) Fission product yield validation. Technical discussions and the resulting work plan of the Coordinated Research Programme are summarized in this report.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Summary Report of the 1st RCM of the CRP on the Updating Fission Yield Data for Applications

The First Research Coordination Meeting of the CRP on “Updating Fission Yield Data for Applications” was held by video conference from 31 August to 4 September 2020 with more than 50 international experts from 16 countries attending the meeting. The CRP is devoted to evaluation efforts of cumulative and independent fission yields for incident energies from the thermal point up to 14 MeV on actinide targets. Produced fission yield evaluations should include full uncertainty quantification and are expected to combine available experimental data and state-of-art model information. Four working groups were created within the collaboration: 1) Availability of experimental fission product yield data for evaluations; 2) New fission product yield experimental data; 3) Fission product yield evaluation; and 4) Fission product yield validation. Technical discussions and the resulting work plan of the Coordinated Research Programme are summarized in this report.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Validation of Recent Changes in Actinide Evaluations U-235, U-233, Pu-239 [Slides]

This presentation discusses U-235 updates, including fluctuations in the fission cross section in the URR range that were refined to represent measured data following the Paradela et al. evaluation. There were small changes to the low-energy resonances to improve the fit to measured capture data from RPI (capture reduced by 5% from 0.06-7.8 eV, by 7.7% from 7.8-11 eV) and there was a very small change to the thermal nu-bar within uncertainties. Discrete level data are stored in MF=6 (format requirement, no impact on calculations) and issues leading to negative eigenvalues in cross-covariances in the RR have been sorted out. In conclusion, many improvements were made to evaluated nuclear data of actinides in the resonance region and above, such as minor changes to U-235 including assessment of changes that depend on the finalization of the O-16 evaluation. U-233 improvements show significant progress in performance and some further improvement might be needed at intermediate energies. Pu-239 ORNL/IAEA evaluation is promising; however, more work is needed.

07 ISOTOPE AND RADIATION SOURCES↗

Status of the RRR evaluations for 233,235 U and 239 Pu [Slides]

The presentation discusses the R -Matrix Analysis of 233 U, 235 U, and 239 Pu and how their interplay among PFNS, TNC, RRR, and neutron multiplicities has a significant impact on the benchmarks. The presentation also discusses the 233 U improved agreement on benchmarks, an additional investigation on the thickness of beryllium reflectors, work on URR (up to 40 keV) and/or extension of RRR (600 eV to 2 keV). Also discussed is how the 235 U progresses on understanding reactivity rates related to depletion calculations, improved agreement with measured (capture) data is quite insensitive to resolve the negative slope, and how the 239 Pu negative slope as a function of the temperature is not understood yet (bias over 2σ lower than measured).

07 ISOTOPE AND RADIATION SOURCES↗

IRDFF-II: A New Neutron Metrology Library

High quality nuclear data is the most fundamental underpinning for all neutron metrology applications. This paper describes the release of version II of the International Reactor Dosimetry and Fusion File (IRDFF-II) that contains a consistent set of nuclear data for fission and fusion neutron metrology applications up to 60 MeV neutron energy. The library is intended to support: a) applications in research reactors; b) safety and regulatory applications in the nuclear power generation in commercial fission reactors; and c) material damage studies in support of the research and development of advanced fusion concepts. The paper describes the contents of the library, documents the thorough verification process used in its preparation, and provides an extensive set of validation data gathered from a wide range of neutron benchmark fields. The new IRDFF-II library includes 119 metrology reactions, four cover material reactions to support self-shielding corrections, five metrology metrics used by the dosimetry community, and cumulative fission products yields for seven fission products in three different neutron energy regions. In support of characterizing the measurement of the residual nuclei from the dosimetry reactions and the fission product decay modes, the present document lists the recommended decay data, particle emission energies and probabilities for 68 activation products. It also includes neutron spectral characterization data for 29 neutron benchmark fields for the validation of the library contents. Additional six reference fields were assessed (four from plutonium critical assemblies, two measured fields for thermal-neutron induced fission on 233U and 239Pu targets) but not used for validation due to systematic discrepancies in C/E reaction rate values or lack of reaction-rate experimental data. Another ten analytical functions are included that can be useful for calculating average cross sections, average energy, thermal spectrum average cross sections and resonance integrals. The IRDFF-II library and comprehensive documentation is available online at www-nds.iaea.org/IRDFF/. Evaluated cross sections can be compared with experimental data and other evaluations at www-nds.iaea.org/exfor/endf.htm. The new library is expected to become the international reference in neutron metrology for multiple applications.

IAEA IRDFF↗