Search NASA⌕ Search

Engineering topics

Cardenas, M. Bayani

Publications and source records attributed to Cardenas, M. Bayani.

12 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Mechanistic definition and prediction of the mass exchange coefficient between rivers and hyporheic zones: The $α$ of two $Ω$s

Solute transport in interconnected rivers and hyporheic zones is typically modeled through dual-domain models where first-order solute mass transfer between the two domains, Ω R and Ω HZ , is represented by a coefficient α. The transient storage model (TSM) is an example of such an approach. In practice, α is determined by fitting the tails of solute tracer breakthrough curves using a TSM. This approach has led to ambiguity regarding α’s physical meaning and transferability. Here, in this work, we investigated the physical basis for α and tested it with virtual experiments through the fully coupled multiphysics model hyporheicFoam for the Ω R – Ω HZ system. hyporheicFoam explicitly simulated coupled flow and solute transport over a kilometer with centimeter-scale resolution. Model results were analyzed to calculate α following its theoretical definition directly. Using the determined α within a TSM enables accurate reproduction of solute transport, underscoring α’s physical relevance and precision.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Water chemistry in flume channel and hyporheic zone (i.e., porewater) associated with: “Rethinking Aerobic Respiration in the Hyporheic Zone Under Variation in Carbon and Nitrogen Stoichiometry”

Dissolved oxygen (DO), total organic carbon (TOC), total nitrogen (TN), molecular data for organic matter, and biochemical reactions for surface water and porewater (i.e., hyporheic zone) collected from a water recirculating flume located at the University of Texas, Austin. The flume contained real river water from Lower Colorado River(Austin, TX) and clean sand. Hyporheic exchange in the flume was induced through The study aims to understand relationships between aerobic metabolism of organic matter and molecular characteristics of organic matter, such as thermodynamic signature and nitrogen content, through the extent of the hyporheic zone at 10 cm- resolution, and through time. During the experiment, organic matter (dry leaves) was added to the flume and removed after 24 hours. The water samples were collected before the addition of leaves, at the time of removal of leaves, and at hour 72. The water samples were analyzed using ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and total organic carbon (TOC) and total nitrogen (TN) analysis. Dissolved oxygen content throughout the surface water and the hyporheic zone of the flume was measured with a large planar optode. This data package is associated with the publication ’ Rethinking Aerobic Respiration in the Hyporheic Zone Under Variation in Carbon and Nitrogen Stoichiometry’ published in Environmental Science and Technology (Turețcaia et al., 2023 https://doi.org/10.1021/acs.est.3c04765). The dataset is comprised of five folders (1) Diss_O2_pic, (2) input_files (3) output_files; (4) python_code; and (5) R_code . Diss_O2_pic contains siximages of dissolved oxygen distribution in a bedform at hours 0, 24, and 72 of the experiment conducted in a large recirculation flume. Images are in separate R and G channels (i.e., RGB). The input_files contains (1) a csv file with FTICR peaks identified within each sample, (2) a csv file with molecular information pertinent to FTICR data with Gibbs free energy calculations adjusted for environmental temperature, (3) a csv file containing concentrations of non-purgeable organic carbon measured throughout the experiment , (4) a csv file containing concentrations of total nitrogen measured throughout the experiment, (5) a csv file containing total biochemical reactions (i.e., transformations) identified in the dataset, (6) a csv containing transformation profiles, and (7) a csv file containing transformations with formulas, and (8) a jpg file with schematic representation of locations for sample collection. The output_files contains (1) and xlsx file containing percent biochemical reactions containing nitrogen identified across all 39 sample, (2) a csv file of merged FTICR data and molecular information files, (3) a csv files containing average Gibbs free energy within sampling domains and at each sampling location, (4) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 0, (5) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 24, (6) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 72, (7) a csv file with percent chemical classes identified across sampling locations at hour 0, (8) a csv file with percent chemical classes identified across sampling locations at hour 24, (9) a csv file with percent chemical classes identified across sampling locations at hour 72, and (10) a csv file containing percent nitrogen containing biochemical reactions identified across sampling locations at hours 0, 24, and 72. The python_code contains seven ipynb files which are Jupyter Notebooks used for data analysis and figures generation. The R_code contains 3 R files with R code used for data analysis and figures generation. This data package contains the processed data used in the associated manuscript. This data has not been previously published.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Hyporheic Exchange Due to Cobbles on Sandy Beds

Hyporheic exchange induced by riverbed topography and roughness provides important ecosystem functions. We investigated how cobble clusters embedded in a finer-grained sand bed affect the near-bed channel flow and the exchange of surface and subsurface water. We tested how the spacing and embeddedness of cobbles altered hyporheic exchange through a three-dimensional fully coupled surface-subsurface model. The 3D modeling framework captured the full physics of the exchange process locating the lateral position of upwelling zones on the side of the cobble. As the cobbles protrude more into the channel, eddies appear downstream, with smaller vortices where cobbles are closer together. In our simulations, hyporheic exchange increased with the spacing and protrusion ratio. The travel time in the hyporheic zone also increased with the protrusion ratio because the hyporheic flow paths are longer when the cobble is more protruded. With different spacings at the highest protrusion ratio, the average slope of early time breakthrough curve was steeper for large spacing settings: the travel time increases as the spacing decreases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Hyporheic Exchange Driven by Submerged Rigid Vegetation: A Modeling Study

Flow-vegetation interaction affects fluid flow hydraulics and associated material transport in river corridors. Concomitant changes in pressure within the flow field due to the presence of vegetation may act as a driver for the formation of hyporheic flow across the sediment-water interface. This potentially important process, however, has yet to be studied. In order to investigate vegetation-induced hyporheic exchange, a series of numerical models of interlinked surface-subsurface flow modified by plant stems was conducted. Periodically staggered plant stem arrays on a flat sediment bed were considered within a coupled multiphysics computational fluid dynamics approach. Plants were idealized as rigid cylinders and arranged in different streamwise and spanwise spacing distances. Each vegetation array was then subjected to a broad range of flow Reynolds Numbers (Re). The results showed that hyporheic flow occurs in all conditions with the presence of vegetation. The vegetation-induced hyporheic flux is found to be a function of Re via a power law. The flux increases with interstem space until the space reaches the distance that rigid stems no longer affect the flow structures in the vicinity of each other. Larger intervegetation distances lead to a larger hyporheic zone. A direct comparison with bedforminduced hyporheic flow showed that vegetation can induce higher hyporheic flux through relatively shallower exchange zones. The results of all the simulations were synthesized into predictive models for hyporheic flux, bulk residence time and exchange depth based on drag coefficient, vegetation density, and Reynolds Number.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Enabling the Application of Large Footprint Open-Bottom Permeameters through New Shape Factors

Open-bottom permeameters (OBP) are commonly used for estimating the hydraulic properties of sediment beds under water bodies and fluxes across the sediment-water interface. The specific shape factor for an OBP flow situation is necessary for data interpretation. It is determined by the ratio of the permeameter tube radius to the tube's penetration depth within the sediment. Previous permeameter designs favored small radii which allowed for deeper penetration and stability of the tube. The shape factor is provided here for large footprint OBPs that allows for shallow penetration and greater radius. Through a numerical and analytical modeling study of the OBP hydrodynamics, previous knowledge on the OBP shape factor is generalized to the entire range of radius-to-penetration ratios that might be practically applied. The results reveal the advantages of the large footprint design, including better sensitivity due to the ability to impose larger discharge over a shorter test duration.

42 ENGINEERING↗
DOE OSTI2021

Evaluating a Laboratory Flume Microbiome as a Window Into Natural Riverbed Biogeochemistry

Riverbeds are hotspots for microbially-mediated reactions that exhibit pronounced variability in space and time. It is challenging to resolve biogeochemical mechanisms in natural riverbeds, as uncontrolled settings complicate data collection and interpretation. To overcome these challenges, laboratory flumes are often used as proxies for natural riverbed systems. Flumes capture spatiotemporal variability and thus allow for controlled investigations of riverbed biogeochemistry. These investigations implicitly rely on the assumption that the flume microbiome is similar to the microbiome of natural riverbeds. However, this assumption has not been tested and it is unknown how the microbiome of a flume compares to natural aquatic settings, including riverbeds. To evaluate the fundamental assumption that a flume hosts a microbiome similar to natural riverbed systems, we used 16s rRNA gene sequencing and publicly available data to compare the sediment microbiome of a single large laboratory flume to a wide variety of natural ecosystems including lake and marine sediments, river, lake, hyporheic, soil, and marine water, and bank and wetland soils. Richness and Shannon diversity metrics, analyses of variance, Bray-Curtis dissimilarity, and analysis of the common microbiomes between flume and river sediment all indicated that the flume microbiome more closely resembled natural riverbed sediments than other ecosystems, supporting the use of flume experiments for investigating natural microbially-mediated biogeochemical processes in riverbeds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Hyporheic Exchange in Sand Dunes Under a Freely Deforming River Water Surface

Bedform-driven hyporheic exchange is conditioned by the head gradients at the sediment-water interface. Local exchange phenomena between the surface and the subsurface are often driven by the dynamic forces related to the velocity distributions around sediment waves. In open channels, the static forces are represented by the water depth, yet most computational fluid dynamics models use a rigid-lid approximation. Here, we investigated whether and when the deformation of the river’s free-surface influences bedform-driven hyporheic exchange. This was done through simulations of coupled open channel and hyporheic flows with the air-water interface modeled either as a free-surface or a rigid-lid across increasing subcritical Froude numbers from ~0.05 to ~0.95. The normalized hyporheic flux was higher when considering free-surface deformation across most of the range of Froude numbers considered. When the Froude number was larger than 0.6 and smaller than 0.85, both hydrostatic and nonhydrostatic-driven fluxes increased significantly compared to the rigid-lid approach and the total flux was about five times that predicted with the rigid-lid. These results indicate that bedform-driven hyporheic fluxes are underestimated in most studies that use a rigid-lid assumption in subcritical flows.

58 GEOSCIENCES↗
DOE OSTI2020

Two-Phase Fluid Flow Properties of Rough Fractures With Heterogeneous Wettability: Analysis With Lattice Boltzmann Simulations

Fractures are conduits for fluid flow in low-permeability geological formations. Multiphase flow properties of fractures are important in natural processes and in engineering applications such as the evaluation of the sealing capacity of caprocks and productivity of hydrocarbon-bearing tight rocks. Investigations of flow and transport through fractures typically focus on the effects of fracture geometric and mechanical factors such as aperture, roughness, and compressibility. The wettability of the fracture surfaces and its influence on microscale interfacial phenomena and macroscale effective transport properties are seldom studied. In this study, we investigated the effect of heterogeneous wetting properties on the displacement of water by supercritical CO2 through a series of lattice Boltzmann method simulations. The results show the evolution of the CO2 plume within a fracture is controlled by both the roughness of the aperture field and the wetting distribution. We combined these factors into a capillary pressure map that can be related to the macroscopic flow behavior of the fracture. We observed that heterogeneous wetting distributions promote the residual trapping of water where lower capillary pressures allowed for isolated water pockets in higher capillary pressure zones. Analysis of fracture unsteady relative permeability shows the effect of wetting on permeability evolution and provides support for the viscous-coupling relative permeability model. Finally, analysis of the steady-state relative permeability and saturation demonstrates a strong correlation between permeability and the standard deviation of the capillary pressure field. Thus, characterizing the distribution of wetting properties of fractures is crucial to understanding multiphase fracture flow and transport properties.

58 GEOSCIENCES↗
DOE OSTI2020

The Complexity of Nonlinear Flow and non-Fickian Transport in Fractures Driven by Three-Dimensional Recirculation Zones

Subsurface fluid flow and solute transport are typically described by first-order or linear rate laws. However, deviations from the first-order rate laws (or anomalous behavior) are typical and lead to nonlinear flow and non-Fickian transport phenomena. The shared underlying mechanisms for these “anomalous” flow and transport phenomena, which are actually typical of fractures, are seldom analyzed. We investigated the co-occurrence of nonlinear flow and non-Fickian transport through numerical simulation experiments of pore-scale flow and solute transport processes through three-dimensional natural fractures. In these fractures, 3-D recirculation zones (RZs) developed and grew with increasing flow rates. Flow nonlinearity resulted from the RZ development and growth, which shrank the main flow channel. Moreover, the same RZs also captured solutes from the main flow channel and released them back later. This retardation resulted in non-Fickian transport. Thus, nonlinear flow and non-Fickian transport are intertwined via their shared dependence on RZs.

58 GEOSCIENCES↗
DOE OSTI2020

The Sensitivity of Hyporheic Exchange to Fractal Properties of Riverbeds

Hyporheic exchange in riverbeds is driven by current-bed topography interactions. Because riverbeds exhibit topographic roughness across scales, from individual grains to bedforms and bars, they can exhibit fractal patterns. This study analyzed the influence of fractal properties of riverbed topography on hyporheic exchange. A set of synthetic fractal riverbeds with different scaling statistics was used as inputs to sequentially coupled numerical simulations of turbulent channel flow and hyporheic flow. In the analysis, the maximum power spectrum (dune size) and the fractal dimension (topographic complexity) were considered as independent variables and we then investigated how interfacial fluxes and hyporheic travel times are functionally related to these variables. As the maximum power spectrum increases (i.e., dune height to flow depth ratio), the average interfacial flux increases logarithmically whereas it increases exponentially with an increase in fractal dimension. Hyporheic exchange is more sensitive to additional roughness (larger fractal dimensions) than to bedform size (larger maximum power). Our results imply that fractal properties of riverbeds are crucial to predicting hyporheic exchange. The predictive relationships we propose could be integrated with reduced complexity, large-scale models. Further, they can also be used to design artificial topographies that target hyporheic ecosystem services.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Flexible and Modular Simultaneous Modeling of Flow and Reactive Transport in Rivers and Hyporheic Zones

Investigations of coupled multiphysics processes in rivers and hyporheic zones have extensively used numerical models. Most existing models use a sequential, one-way coupling between the surface and subsurface domains. Such one-way coupling potentially introduces error. To overcome this, a fully coupled model, hyporheicFoam, was developed using the open-source computational platform OpenFOAM. It captures the coupled flow and multicomponent reactive transport processes within both surface and subsurface domains and across their interface. The coupling between two domains is implemented by mapping conservative flux boundary conditions at the interface through an iterative algorithm. Reactive transport is enabled by specifying a reaction network. To start, we have implemented reaction kinetics following the double Monod-type model with inhibition. The model capability is illustrated through modeling of both conservative and reactive hyporheic flow and transport through dune bedforms. With the novel coupled model, it is now possible to quantify reactions wherein the reactants and products are constantly exchanging between domains and have feedbacks. hyporheicFoam can simulate large, three-dimensional cases owing to the computational flexibility and power offered by the code structure and parallel design of OpenFOAM.

58 GEOSCIENCES↗