Search NASA⌕ Search

Engineering topics

Carey, J. William

Publications and source records attributed to Carey, J. William.

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unlocking Solutions: Innovative Approaches to Identifying and Mitigating the Environmental Impacts of Undocumented Orphan Wells in the United States

In the United States, hundreds of thousands of undocumented orphan wells have been abandoned, leaving the burden of managing environmental hazards to governmental agencies or the public. These wells, a result of over a century of fossil fuel extraction without adequate regulation, lack basic information like location and depth, emit greenhouse gases, and leak toxic substances into groundwater. For most of these wells, basic information such as well location and depth is unknown or unverified. Addressing this issue necessitates innovative and interdisciplinary approaches for locating, characterizing, and mitigating their environmental impacts. Our survey of the United States revealed the need for tools to identify well locations and assess conditions, prompting the development of technologies including machine learning to automatically extract information from old records (95%+ accuracy), remote sensing technologies like aero-magnetometers to find buried wells, and cost-effective methods for estimating methane emissions. Notably, fixed-wing drones equipped with magnetometers have emerged as cost-effective and efficient for discovering unknown wells, offering advantages over helicopters and quadcopters. Efforts also involved leveraging local knowledge through outreach to state and tribal governments as well as citizen science initiatives. These initiatives aim to significantly contribute to environmental sustainability by reducing greenhouse gases and improving air and water quality.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A Geo‐Structurally Based Correction Factor for Apparent Dissolution Rates in Fractured Media

Abstract Field measurements of apparent geochemical weathering reaction rates in subsurface fractured porous media are known to deviate from laboratory measurements by multiple orders of magnitude. To date, there is no geologically based explanation for this discrepancy that can be used to predict reaction rates in field systems. Proposed correction factors are typically based on ad hoc characterizations related to geochemical kinetic models. Through a series of high‐fidelity reactive transport simulations of mineral dissolution within explicit 3D discrete fracture networks, we are able to link the geo‐structural attributes with reactive transport observations. We develop a correction factor to linear transition state theory for the prediction of the apparent dissolution rate based on measurable geological properties. The modified rate law shows excellent agreement with numerical simulations, indicating that geological structure could be a primary reason for the discrepancy between laboratory and field observations of apparent dissolution rates in fractured media.

58 GEOSCIENCES↗
DOE OSTI2021

Cement stress and microstructure evolution during curing in semi-rigid high-pressure environments

The process of cement slurry curing into a solid has a direct effect on the initial state of stress in a composite concrete and steel structure. Failure models for critical infrastructure and wellbores could benefit from measurements of this initial stress because it greatly influences structural performance. Here, we present measurements of the initial stress state (total stress, effective stress, and pore pressure) of multiple cement formulations cured under a high-pressure of 40 MPa within a semi-rigid steel pipe. Our results show that cements cured in this restrained environment exhibit dense microstructures with low permeability (nano-Darcy), develop an anisotropic stress state greater than zero and less than the curing pressure, and undergo a staged curing process where hydration and mechanical behaviors evolve from a slurry into a pre-stressed porous medium. Both drained and undrained scenarios were investigated, revealing a feedback from the semi-rigid boundary towards improved cement performance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A machine-learning inverse model framework for rapid forecasting and history matching in unconventional reservoirs

Model-based optimization for real-time forecasting in unconventional reser-voirs requires novel methods and work?ows since the strategies and work?ows used in conventional reservoirs are either inapplicable, or prohibitively expen-sive and time-consuming. Insu?cient site data and computational expense of high-?delity simulations mean that work?ows with high-?delity simulations are not ideal for usage in comprehensive uncertainty quanti?cation stud-ies that require 1000s of forward model runs. We present an alternative, novel work?ow for unconventional reservoirs, based on the interplay between reduced-order models and machine-learning. Our physics-informed machine-learning (PIML) work?ow addresses the challenges to real-time reservoir management in uncoventionals, namely lack of data (the time-frame for which the wells have been producing), and computational expense of high-?delity modeling. We use the machine-learning paradigm of transfer-learning to bind together fast but less accurate reduced-order models with slow, but accurate high-?delity models and circumvent the di?culties inherent in the current state-of-the-art for unconventionals. Such a PIML work?ow, grounded in physics, is a viable candidate for real-time history matching and production forecasting in a fractured shale gas reservoir. The signi?cance of our approach is that while it is developed for a particu-lar well and site in the Marcelus Shale gas reservoir of the Appalachian basin (MSEEL), it is not wedded to it. We expect the same work?ow can be ap-plied to other shale formations (e.g., Woodford, Barnett, Utica, EagleFord) should site-data become available, using the same set of machine-learning techniques from transfer learning. Some ?ne-tuning (or minimal retraining of the neural networks) will be required to transfer knowledge across shale gas sites/formations but it is a clearly superior alternative to developing a new machine-learning model altogether when considering a di?erent site.

Srinivasan, Shriram↗
DOE OSTI2021

Predicting Cement-Sheath Integrity with Consideration of Initial State of Stress and Thermoporoelastic Effects

In conventional wellbore-integrity analysis, the cement sheath’s initial state of stress and transient thermoporoelastic effects are often neglected. However, the initial state of stress is prerequisite information for accurately predicting the safe operating conditions that prevent a cemented well from being damaged. In addition, transient thermoporoelastic effects can have a profound effect on when damage will occur. Here in this paper, we propose a model that includes these effects to predict the safe operating pressures and temperatures that will prevent cement-sheath failure. For the initial state of stress, we proposed an empirical model using measurements. Subsequent stress changes are evaluated by a fully coupled transient thermoporoelastic model to analyze the mechanical behavior of the cement sheath. We predict the safe operating envelope (SOE) for shear, tensile, and debonding cement-sheath failures caused by pressure and temperature perturbations after the cement sets. Our model predicts that pore pressure is a key factor for cement failure, especially for rapid temperature changes. If the formation is low permeability, the transient pore pressures are amplified, causing the risk of damage to increase. Compared with conventional thermoelastic models, the thermoporoelastic model predicts a smaller SOE when heating the internal casing fluid and a larger envelope when cooling the internal casing fluid. Finally, the heating rate was considered with respect to field applications. The heating rate was also considered, and slower heating/cooling rates can prevent damage to the cement sheath. Finally, the thermoporoelastic model was applied to explain several laboratory and field experiments and achieved good matches.

02 PETROLEUM↗
DOE OSTI2020

Big Sky Regional Carbon Sequestration Partnership (Phase III Final Scientific/Technical Report)

The Big Sky Carbon Sequestration Partnership (BSCSP) pursued a Phase III demonstration project at Kevin Dome in north central Montana. Kevin Dome covers approximately 700 square miles and is a naturally occurring CO 2 reservoir that is flanked by oil and gas fields. The carbon dioxide (CO 2 ) is in the upper Devonian Duperow (carbonate) formation and does not reach the spill point of the dome; therefore, the dome has potential as a CO 2 sequestration reservoir, a CO 2 supply, or as both if anthropogenic sources and enhanced oil recovery (EOR) operations are associated with the dome. Kevin Dome could potentially act as a buffer to continue accepting anthropogenic CO 2 when EOR flooding operations are interrupted or completed. The project objective was to produce one million tonnes of CO 2 from the gas cap of Kevin Dome, pipe it laterally, inject, and re-store it in the brine leg of the same formation to test the hub / buffer storage concept. This was to be accomplished by drilling up to five production wells, building a short pipeline and compression facilities, and drilling an injection well and several monitoring wells. BSCSP commenced outreach and site characterization activities including acquiring baseline data for near-surface insurance monitoring, acquiring 3-dimensional, 9-component surface seismic over the project area, drilling two test wells (one in the production area and one in the injection area), coring key intervals, and performing comprehensive logging. Well tests of those wells revealed two barriers to the project. The production (Danielson 33-17) well was perforated in multiple zones but failed to produce any significant CO 2 . This was despite being drilled in the near vicinity of a historic well that had produced 3700 MCF per day in a drill stem test. Modeling indicated that this was likely due to a phase change during production causing a temperature drop resulting in hydrate and/or water ice formation that clogged the formation. Tests of the injection zone (Wallewein 22-1) well indicated total dissolved solids (TDS) slightly below the EPA required 10,000 parts per million (ppm) for a Class VI underground injection control permit. While the project was initiated before Class VI rules were promulgated, and this was an experimental project (seemingly qualified for a Class V permit), the Environmental Protection Agency (EPA) indicated that injection would require a Class VI permit. The low salinity result was unexpected as contours plotted based on regional formation water quality data indicated an expected TDS above 20,000 ppm, and wells between the recharge zone and the Wallewein well tested above 10,000 ppm. Faced with the inability to obtain an injection permit, the demonstration project could not proceed. However, the project had generated valuable samples and data on a large natural analog including 32 sq. mi. of 3-D, 9-C seismic, 430 ft. of carbonate core covering seven different depositional environments taken from areas with, and without the presence of CO 2 , 30 ft. of core of two caprocks, a tight carbonate and an anhydrite, a full set of modern logs on both wells, and well tests. DOE decided to re-scope the project around completing studies utilizing this data. This report covers both the initial scope and the re-scope (Task / Section numbers preceded with an R). While the report covers a wide range of project activities, highlights of this work include: Development of a geostatic model using neural nets to match well logs to facies and using multi-waveform seismic to inform reservoir heterogeneity; Unique mechanical testing of permeability – stress relationship in two caprock materials; Development of full waveform inversion to generate a high resolution velocity model; Model development for dual permeability (fracture and matrix) systems to better account for matrix-matrix interactions; Joint seismic wave inversion (including the first quadr-joint inversion) exhibiting better imaging of a challenging reservoir zone in stiff rock; Core flow and core flood results on a reactive carbonate; and Innovative laboratory measurements of seismic response of fractured core as a function of fluid fill.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Cordierite-spinel troctolite, a new magnesium-rich lithology from the lunar highlands

A clast of spineltroctolite containing 8 percent cordierite (Mg2,Al4Si5O18) has been identified among the constituents of Apollo 15 regolith breccia 15295. The cordierite and associated anorthite, forsteritic olivine, and pleonaste spinel represent a new, Mg-rich lunar highlands lithology that formed by metamorphism of an igneous spinel cumulate. The cordierite-forsterite pair in the assemblage is stable at a maximum pressure of 2.5 kilobars, equivalent to a depth of 50 kilometers, or 10 kilometers above the lunar crust-mantle boundary. The occurrence of the clast indicates that spinel cumulates are a more important constituent of the lower lunar crust than has been recognized. The rarity of cordierite-spinel troctolite among lunar rock samples suggests that it is excavated only by large impact events, such as the one that formed the adjacent Imbrium Basin.

Marvin, Ursula B.↗