Search NASA⌕ Search

Engineering topics

Carlson, T. N.

Publications and source records attributed to Carlson, T. N..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Preliminary assessment of soil moisture over vegetation

Modeling of surface energy fluxes was combined with in-situ measurement of surface parameters, specifically the surface sensible heat flux and the substrate soil moisture. A vegetation component was incorporated in the atmospheric/substrate model and subsequently showed that fluxes over vegetation can be very much different than those over bare soil for a given surface-air temperature difference. The temperature signatures measured by a satellite or airborne radiometer should be interpreted in conjunction with surface measurements of modeled parameters. Paradoxically, analyses of the large-scale distribution of soil moisture availability shows that there is a very high correlation between antecedent precipitation and inferred surface moisture availability, even when no specific vegetation parameterization is used in the boundary layer model. Preparatory work was begun in streamlining the present boundary layer model, developing better algorithms for relating surface temperatures to substrate moisture, preparing for participation in the French HAPEX experiment, and analyzing aircraft microwave and radiometric surface temperature data for the 1983 French Beauce experiments.

Carlson, T. N.↗
NASA NTRS1986

Regional-scale estimates of surface moisture availability and thermal inertia using remote thermal measurements

A review is presented of numerical models which were developed to interpret thermal IR data and to identify the governing parameters and surface energy fluxes recorded in the images. Analytic, predictive, diagnostic and empirical models are described. The limitations of each type of modeling approach are explored in terms of the error sources and inherent constraints due to theoretical or measurement limitations. Sample results of regional-scale soil moisture or evaporation patterns derived from the Heat Capacity Mapping Mission and GOES satellite data through application of the predictive model devised by Carlson (1981) are discussed. The analysis indicates that pattern recognition will probably be highest when data are collected over flat, arid, sparsely vegetated terrain. The soil moisture data then obtained may be accurate to within 10-20 percent.

Carlson, T. N.↗
NASA NTRS1985

A method for estimating soil moisture availability

A method for estimating values of soil moisture based on measurements of infrared surface temperature is discussed. A central element in the method is a boundary layer model. Although it has been shown that soil moistures determined by this method using satellite measurements do correspond in a coarse fashion to the antecedent precipitation, the accuracy and exact physical interpretation (with respect to ground water amounts) are not well known. This area of ignorance, which currently impedes the practical application of the method to problems in hydrology, meteorology and agriculture, is largely due to the absence of corresponding surface measurements. Preliminary field measurements made over France have led to the development of a promising vegetation formulation (Taconet et al., 1985), which has been incorporated in the model. It is necessary, however, to test the vegetation component, and the entire method, over a wide variety of surface conditions and crop canopies.

Carlson, T. N.↗
NASA NTRS1984

Transverse ageostrophic circulations associated with elevated mixed layers

The nature of the frontogenetically forced transverse ageostrophic circulations connected with elevated mixed layer structure is investigated as a first step toward diagnosing the complex vertical circulation patterns occurring in the vicinity of elevated mixed layers within a severe storm environment. The Sawyer-Eliassen ageostrophic circulation equation is reviewed and applied to the elevated mixed layer detected in the SESAME IV data set at 2100 GMT of May 9, 1979. The results of the ageostrophic circulation diagnosis are confirmed and refined by considering an analytic specification for the elevated mixed layer structure.

Keyser, D.↗
NASA NTRS1982

Use of thermal inertia determined by HCMM to predict nocturnal cold prone areas in Florida

Registered data sets were used to develop qualititative temperature and delta T maps of a band across north Florida and across south Florida for use with Carlson's boundary layer energy model balance model. Thermal inertia and moisture availability computations for north Florida are being used to investigate model sensitivity and to evaluate input parameters. Temperature differences of day-night HCMM overpasses clearly differentiate wetlands and uplands areas.

Allen, L. H., Jr.↗
NASA NTRS1982

Interactive initialization of heat flux parameters for numerical models using satellite temperature measurements

A method for obtaining patterns of moisture availability (and net evaporation) from satellite infrared measurements employs Carlson's boundary layer model and a variety of image processing routines executed by a minicomputer. To test the method with regard to regional scale moisture analyses, two case studies were chosen because of the availability of HCMM data and because of the presence of a large horizontal gradient in antecedent precipitation and crp moisture index. Results show some correlation in both cases between antecedent precipitation and derived moisture availability. Apparently, regional-scale moisture availability patterns can be determined with some degree of fidelity but the values themselves may be useful only in the relative sense and significant to within plus or minus one category of dryness over a range of 4 or 5 categories between absolutely dry and field saturation. Preliminary results suggest that the derived moisture values correlate best with longer-term precipitation totals, suggesting that the infrared temperatures respond more sensitively to a relatively deep substrate layer.

Carlson, T. N.↗
NASA NTRS1981

The effects of surface heat flux on plume spread and concentration - An assessment based on remote measurements

Satellite-derived surface heat-flux maps are presented in order to illustrate the large horizontal variations in surface heating that can occur over heterogeneous terrain. Results of plume-model studies published by Lamb (1978) and Willis and Deardorff (1978) were modified to show that the ground-level pollutant concentration depend closely upon the surface heat flux for the case of an elevated plume source during periods of free convection. It is suggested that remotely determined surface heat-flux patterns can be used in making plume dispersion calculations.

Carlson, T. N.↗
NASA NTRS1981

Interactive initialization of heat flux parameters for numerical models using satellite temperature measurements

Day/night Heat Capacity Mapping Mission image pairs over Kansas and Indiana were used to examine the spatial variation of moisture availability on the mesoscale. Of particular concern was whether patterns of moisture availability and thermal inertia, as well as surface heat fluxes, respond to significant spatial variations in the rainfall pattern. A temperature analysis for the Indiana case is presented.

Carlson, T. N.↗
NASA NTRS1981

Interactive initialization of heat flux parameters for numerical models using satellite temperature measurements

Efforts were made (1) to bring the image processing and boundary layer model operation into a completely interactive mode and (2) to test a method for determining the surface energy budget and surface moisture availability and thermal inertia on a scale appreciably larger than that of the city. A region a few hundred kilometers on a side centered over southern Indiana was examined.

Carlson, T. N.↗
NASA NTRS1981

The Pennsylvania Barrens - A view from space

The presence of an anomalous cold area, the Pennsylvania Barrens, which consistently displays temperatures 10-15 C below those of a nearby college weather station on clear, dry, windless nights, was studied by means of IR images from the NASA Heat Capacity Mapping Mission satellite. The Barrens are surrounded by wooded ridges, which have a high thermal inertia, and it is concluded that the movement of cold air from high regions to lower valleys contributes significantly to the thermal differences between sites.

Carlson, T. N.↗
NASA NTRS1981

Satellite estimation of the surface energy balance, moisture availability and thermal inertia

A method for inferring the distribution of surface heat and evaporative fluxes and the ground moisture availability and thermal inertia (ground conductive capacity) is used to analyze two urbanized areas, Los Angeles and St. Louis. The technique employs infrared satellite temperature measurements in conjunction with a one-dimensional boundary-layer model. Results show that there is a marked reduction of evaporation and moisture availability and a corresponding elevation of sensible heat flux over urbanized areas and over cropped areas with low vegetative cover. Conversely, low heat flux and high evaporation characterize vegetated and, especially, forested areas. Warm urban centers appear directly related to a reduction in vegetation, which normally allows for a greater fraction of available radiant energy to be converted into latent heat flux. The distribution of thermal inertia was surprisingly ill-defined and its variation between urban and rural areas was quite small. Thus, the increased heat storage within the urban fabric, which has been proposed as the underlying cause of the nocturnal heat island, may be caused mainly by enhanced daytime surface heating which occurs because of surface dryness, rather than by large spatial variations in the conductivity of the surface.

Carlson, T. N.↗
NASA NTRS1980

Applications of HCMM satellite data to the study of urban heating patterns

A research summary is presented and is divided into two major areas, one developmental and the other basic science. In the first three sub-categories are discussed: image processing techniques, especially the method whereby surface temperature image are converted to images of surface energy budget, moisture availability and thermal inertia; model development; and model verification. Basic science includes the use of a method to further the understanding of the urban heat island and anthropogenic modification of the surface heating, evaporation over vegetated surfaces, and the effect of surface heat flux on plume spread.

Carlson, T. N.↗
NASA NTRS1980

Analysis and prediction of severe storms environment

Using the special data set collected in Project SESAME (1979), an analysis and modeling efforts to test the hypothesis that a unique combination of terrain, boundary layer processes, and synoptic-scale circulations result in a preferred region of latent instability that determines the location of severe thunderstorm outbreaks are described. Because the relevant circulations are large scale, it is hypothesized that a model that contains the necessary physics will be able to predict the location of these severe storms at least 24 h in advance. Through detailed analysis of the SESAME data set and a series of numerical forecasts, the above hypothesis is being tested and it is hoped that quantitative understanding of the processes leading to the development of severe thunderstorms in the midwestern United States will be gained.

Carlson, T. N.↗
NASA NTRS1980

Applications of HCMM satellite data to the study of urban heating patterns

The first analyses of the Washington, D.C. area was completed in which a method was employed to determine the surface energy balance, moisture availability, and thermal inertia. Further analyses of the Clarksville, Tennessee area during project STATE were completed. To test a newly operational interactive system, a temperature study of the Central Pennsylvania Barrens was performed.

Carlson, T. N.↗