Search NASA⌕ Search

Engineering topics

Carman, Carl

Publications and source records attributed to Carman, Carl.

At least 19 records

Illinois Basin Carbon Ore, Rare Earth, and Critical Minerals (IB-CORE-CM) Initiative (Final Report (Redacted)(Public))

Final Report; Illinois Basin - Carbon Ore, Rare Earth and Critical Mineral (IB-CORE-CM) project team has conducted a comprehensive basin-wide assessment of CORE-CM presence in coal, coal-based, and waste stream resources, as well as a thorough examination of mining practices, separation technologies, and the local infrastructure necessary for producing and providing the needed CORE-CM resources for U.S. industry. This final report details the research, methods, and results of the project.

01 COAL, LIGNITE, AND PEAT↗

Carbon Storage Core Characterization Efforts at NETL

The multi-scale Computed Tomography (CT) and core flow facility in the Geocharacterization Laboratory at NETL, Morgantown yields porosity, permeability, and fracture properties of rock core samples obtained from the subsurface while maintaining the integrity of the sample. Additionally, geophysical bulk rock properties are analyzed with the laboratory’s GeoTEK multi-sensor core logger in a comparable fashion to downhole methods. NETL researchers collaborate with stakeholders within the carbon storage, oil and gas, and critical minerals sectors. Since 2017, over 1.88 miles of core have been analyzed within the laboratory and all data is publicly available through the Technical Report Series (TRS) on the Energy Data eXchange (EDX). Additionally, the website, RokBase, was curated to extrapolate and visualize the high-resolution data from field operations. The characterization of the Lively Grove #1 (LG#1) well provides a case study into the full capabilities of the Geocharacterization Laboratory. During the comprehensive study of LG#1 ~1-2 mm in diameter, vertical to bedding, cylindrical structures were identified throughout the St. Peter Formation. These structures are pervasive throughout the St. Peter Formation at depth and are characterized as the trace fossil, Skolithos.

Isom, Shelby L↗

Stacked Greenfield and Brownfield ROZ Fairways in the Illinois Basin Geo-Laboratory: Co-Optimization of EOR and Associated CO 2 Storage

Residual oil zones (ROZs) are economically viable targets for carbon dioxide enhanced oil recovery (CO 2 -EOR); thick, carbonate ROZs in the San Andres Formation in the Wasson Field of the Permian Basin are an example. Incremental oil produced from CO 2 -EOR can be carbon negative via associated storage of injected CO 2 . Given the regional extent of ROZ fairways and generally higher net utilization of CO 2 (compared to conventional CO 2 -EOR), ROZs provide the opportunity for significant carbon neutral to carbon negative oil production with associated CO 2 storage, and therefore should be a priority target for exploration. However, ROZs have not been widely recognized or identified due to poor or no conventional oil production. Hence, in places like the Illinois Basin (ILB), exploratory analyses are required to recognize the existence of an ROZ. As part of this study, four formations were selected for detailed regional characterization and analysis: Carper Sandstone (part of the Borden Siltstone), Tar Springs Sandstone, Cypress Sandstone, and Middle Devonian (Geneva Dolomite and associated Dutch Creek Sandstone). The four formations underwent regional geological characterization to develop a regional geologic framework for the ROZs and their overlying seals. Findings of this study are supported by data from two field laboratory sites, one with stacked greenfield ROZs and the other with a stacked complex that includes a brownfield ROZ and depleted conventional reservoirs. The field laboratory sites were used to collect data and conduct tests to validate ROZ detection methodologies and identify economic field-deployable strategies to co-optimize CO 2 -EOR and associated storage in stacked ROZs. Findings from these field sites were extrapolated to characterize the basin-wide stacked ROZ fairway resource.

01 COAL, LIGNITE, AND PEAT↗

Computed Tomography Scanning and Petrophysical Measurements of the Lively Grove #1 Well Core

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) in Morgantown, West Virginia were used to characterize core from the Lively Grove #1 Well (API 121892494700), drilled near Marissa, Washington County, Illinois. Core from the well was obtained as part of the Illinois Storage Corridor’s Carbon Storage Assurance Facility Enterprise (CarbonSAFE) project (DE FE0031892). The primary impetus of this work was to capture a detailed digital representation of the core from the Lively Grove #1 Well. The collaboration between the U.S. Department of Energy’s (DOE) NETL and the Illinois State Geological Survey (ISGS) enables other research entities to access information about this potential carbon storage location and Cambro-Ordovician Storage Complex formations of the Illinois Basin. The resultant datasets are presented in this report and can be accessed from NETL’s Energy Data eXchange (EDX) online system. All equipment and techniques used were non-destructive, enabling future examinations and analyses to be performed on these cores. Fractures, discontinuities, and millimeter-scale features were readily detectable with the medical CT scanner-acquired images. Imaging with the NETL medical CT scanner was performed on entire cores. Qualitative analysis of the medical CT images, coupled with X-ray fluorescence (XRF), gamma density, and magnetic susceptibility measurements from the MSCL were useful in identifying zones of interest for potential future analysis. Higher-resolution industrial and micro-CT images were acquired from selected zones along the depth of the core to visualize the structure in higher detail. The ability to quickly identify key areas for more detailed study with higher resolution will save time and resources in future studies. The combination of methods used provides a multi-scale analysis of the core; with the resulting macro- and micro-descriptions relevant to many subsurface energy related examinations traditionally performed at NETL.

54 ENVIRONMENTAL SCIENCES↗

ISGS CarbonSAFE Lively Grove Core

Computed tomography and core logging data from the Lively Grove #1 Well core drilled by the Illinois State Geological Survey in 2021 under DE-FE0031892. Data description can be found in: Crandall, D.; Paronish, T.; Mitchell, N.; Jarvis, K.; Brown, S.; Moore, J.; Gill, M.; Blakley, C.; Okwen, R.; Korose, C.; Carman, C. Computed Tomography Scanning and Petrophysical Measurements of the Lively Grove #1 Well Core; DOE/NETL-2023/3877; NETL Technical Report Series; U.S. Department of Energy, National Energy Technology Laboratory: Morgantown, WV, 2023; p 61.

CarbonSafe↗

Computed Tomography Scanning and Geophysical Measurements of the One Earth Energy Well #1 Core

The computed tomography (CT) facilities and the Multi-Sensor Core Logger (MSCL) at the National Energy Technology Laboratory (NETL) in Morgantown, West Virginia were used to characterize the Lower Mt. Simon Sandstone and Eau Claire Formation core from the One Earth Energy Well #1 (OEE Well #1) in the Illinois Basin. The primary impetus of this work is a collaboration between the U.S. Department of Energy (DOE), the Illinois State Geological Survey (ISGS), the University of Illinois, and One Earth Energy to characterize and make publicly available core information of interest to carbon sequestration efforts in the Illinois Basin. This stratigraphic well and the core data produced in this report will aid in understanding the carbon sequestration potential of the Lower Mt. Simon Sandstone and the sealing capacity of the overlying units. The resultant datasets are presented in this report and can be accessed from NETL's Energy Data eXchange (EDX) online system using the following link: https://edx.netl.doe.gov/dataset/illinois-storage-corridor-one-earth-energy-1-core.

47 OTHER INSTRUMENTATION↗

CarbonSAFE Illinois (Macon County Final Report)

This report summarizes an extensive work package to present key activities and findings towards evaluating sites for geologic storage of CO 2 . The project was undertaken as a series of tasks that addressed risk, stakeholder engagement, business and economic issues, permitting, drilling and well testing, geologic characterization, seismic surveys, modeling, CO 2 source suitability and infrastructure development. Detailed reports associated with these tasks are included as appendices to this report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Wabash CarbonSAFE. Geologic Analysis of the Potosi Dolomite Reservoir Interval and Potential Confining Units, at the Wabash #1 Well, Vigo Co., Indiana, Subtask 7.2, Technical Report

The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to evaluate the feasibility of commercial-scale CO 2 storage near the site. The Mt. Simon Sandstone was the initial target for storage evaluation and was found to have generally poor reservoir qualities in the Wabash #1 well. Focus was then placed on the secondary target, the Potosi Dolomite. For storage and containment evaluation an extensive suite of geophysical logs was collected throughout the borehole, and whole cores were obtained from the Mt. Simon Sandstone, Eau Claire Formation, and Maquoketa Group. The Maquoketa Group is identified as a regionally extensive secondary sealing interval above the Mt. Simon Sandstone and as a primary seal for the Potosi Dolomite storage complex. Due to concerns over potential lost circulation zones in the Potosi Dolomite during drilling, no core samples or Formation Micro Imager (FMI) logs were acquired in the Potosi Dolomite. However, cased hole well testing was performed over a 20 feet (6 m) interval within the Potosi Dolomite during which a fluid swab sample was obtained. Approximately 35 miles of 2D seismic information was acquired in the project area near Wabash #1 to aid in reservoir and caprock characterization. The highly porous and permeable zones in the Potosi Dolomite and lower Oneota Dolomite observed within the Wabash #1 well are, for the purpose of this report, considered the same reservoir package and referred to as the Potosi reservoir interval. This report presents a regional depositional context for the Potosi reservoir interval, the overlying confining zones in the Knox Group, and Maquoketa Group primary seal. This context is developed through detailed information obtained from the Wabash #1 well such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Potosi reservoir interval. Information discussed in this report was compiled as a basis for the development of static and dynamic geologic models of the Potosi Dolomite storage complex. The static and dynamic modeling of CO 2 injection in the Potosi reservoir interval are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Wabash CarbonSAFE Static and Dynamic Modeling: Task 9.0 (Technical Report)

The objective of the Wabash CarbonSAFE project’s static and dynamic modeling task is to assess the feasibility of storing 50 million tonnes (1.67 million metric tonnes annually; MMTA) of industrially-sourced carbon dioxide (CO 2 ) in a commercial-scale geological storage complex at Wabash Valley Resources LLC (WVR) gasification facility near Terre Haute, Indiana over a period of 30 years. The targeted formations for storing CO 2 are: 1) Mt. Simon Sandstone (MSS) and the 2) Potosi Dolomite (Knox Group). All of the available data from the recently drilled Wabash #1 stratigraphic test well (now plugged and abandoned) were used in the construction of both the static and dynamic models. Geologic models were constructed to characterize both the Mt. Simon Sandstone and Potosi Dolomite storage complexes. Dynamic simulation models were constructed and used to assess the feasibility of injecting CO 2 into the Mt. Simon and Potosi formations. The geocellular models for the Potosi Dolomite and Mt. Simon Sandstone were built using Petrel™, Schlumberger’s reservoir modeling software. The dynamic simulations were run using Landmark’s Nexus ® reservoir simulation software.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Development of a Regional Roadmap for Source Network and Storage Deployment for CarbonSAFE Illinois - Macon County (Task 10)

Research documented in this report includes (1) resource estimates for the Lower Mt. Simon Sandstone in the Illinois Basin, including storage and cost estimates, and (2) regional roadmaps for carbon capture and storage (CCS) deployment using five capture facilities throughout the Illinois Basin: Archer Daniels Midland Decatur (ADM Decatur), Abbott Power Plant, City Water, Light, and Power (CWLP), One Earth Energy, and Prairie State Energy Campus (PSEC). Resource estimates were developed using the Sequestration of CO 2 Tool (SCO2T) and data provided by the Illinois State Geological Survey (ISGS), and regional roadmaps for CCS deployment were developed in SimCCS Gateway, a decision-support tool for designing CCS infrastructure.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Pre-drilling Site Assessment: One Earth Energy

The Illinois Storage Corridor project will drill a test well in Ford County, IL, near the One Earth Energy facility in Gibson City, IL. Lithologic, geomechanical, and geophysical data collected from samples testing and an extensive geophysical logging suite will be used to determine the feasibility of the geologic sequestration of 50 million tonnes or more of injected carbon dioxide at this location. The primary target reservoir and caprock to be investigated for the Illinois Storage Corridor project are the Mt. Simon Sandstone and Eau Claire Formation, respectively, which together constitute a storage complex that has already been successfully used for natural gas storage in east-central Illinois and for geologic sequestration of carbon dioxide in south-central Illinois. The Lower Mt. Simon, which includes a high- porosity and -permeability arkosic layer, is being targeted as the primary storage zone. Regional maps of this unit indicate that the Lower Mt. Simon is expected to have excellent reservoir characteristics and high net thickness at the drill site.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Application of emerging monitoring techniques at the Illinois Basin – Decatur Project

The Illinois Basin – Decatur Project is a large-scale carbon capture and storage demonstration project located in Decatur, Illinois, USA. In this project, one million metric tons of carbon dioxide (CO 2 ) was captured from an ethanol production facility and successfully injected into a deep saline reservoir over a period of three years. The scale of this project presented an opportunity to explore emerging technologies for effective long-term monitoring of the carbon capture and storage site. This research documents the application of three emerging monitoring techniques: (1) a prototype “open-path” sensor, a method of continuously monitoring atmospheric CO 2 by applying tunable diode laser absorption spectroscopy to provide a warning system for personnel safety along pipelines and at wellheads; (2) the Greenhouse Gas Laser Imaging Tomography Experiment (GreenLITE), an automated system for measuring two-dimensional spatial distribution of atmospheric CO 2 concentrations; and (3) periodic aerial imagery, a method of documenting surface-vegetation dynamics to detect vegetative responses to CO 2 leaks. The objective of this work was to assess the advantages and limitations of these monitoring techniques and quantify their reliability over an extended deployment at an active industrial site. These results will aid in determining viability of long-term monitoring on a commercial scale.

42 ENGINEERING↗

NRAP Toolkit Screening for CarbonSAFE Illinois - Macon County

In this report we take stratigraphic data from the ISGS-led Macon County Phase 2 CarbonSAFE’s proposed site in Christian County, Illinois, and conduct reservoir simulations to generate pressure and CO 2 saturation plume data as a function of time. We then use this plume data along with the stratigraphic data as inputs to the NRAP Open-source Integrated Assessment Model (NRAP-Open-IAM) to evaluate project risks. For this report we focus on the probabilistic risk associated with hypothetical leakage of CO 2 and brine along the injection well and one monitoring well. We also study the resulting impact to two overlying aquifers, which could be used to inform monitoring technology selection.

54 ENVIRONMENTAL SCIENCES↗

Screening and Selection of Illinois Basin ROZs for Resource Assessment

This report summarizes the efforts to screen the seven candidate formations as well as the selection of three formations (Carper Sandstone [part of Borden Siltstone], Tar Springs Sandstone, and Geneva Dolomite/Dutch Creek Sandstone) for further characterization and detailed analysis.

02 PETROLEUM↗

CarbonSAFE East Sub-Basin Site Feasibility Plan Subtask 4.5 – Topical Report: DOE-FE0029445-12

Regional industrial facilities were considered for potential commercial-scale [50 million metric tons (55 tons) or more] geological storage in a CO 2 source and storage network study for the CarbonSAFE Illinois East Sub-Basin region (DOE-FE0029445-9). The study area has a number of potential geologic sequestration targets, including three significant deep saline reservoirs with corresponding seals, and potential enhanced oil recovery (CO 2 -EOR) opportunities (Figure 1). Recent geological research has focused on a high porosity, arkosic zone within the Lower Mt. Simon Sandstone as a prospective storage resource play in the region. This report summarizes the regional geology of the East Sub-Basin and discusses considerations leading from pre-feasibility work into the Wabash CarbonSAFE feasibility project (DE-FE0031626), recently underway in conjunction with the Wabash Valley Resources (WVR) ammonia plant retrofit taking place at the former US DOE Integrated Gasification Combined Cycle (IGCC) plant located near Terre Haute, Indiana. As part of the feasibility study, geological and site characterization work will address data gaps and risks outlined in Table 1 and will aid continued steps toward commercial-scale CCS at the WVR site. The feasibility plan discussed here draws upon regional assessment work in the East Sub-Basin as it pertains to risk and data needs to characterize the WVR site, highlights plans for data acquisition to support characterization efforts, and offers insight into the legal and permitting landscape surrounding CCS in the state of Indiana.

01 COAL, LIGNITE, AND PEAT↗

A Summary of CO2-Enhanced Oil Recovery Options in the Illinois East Sub-Basin

Illinois Basin oil fields have an estimated CO2 storage resource of 140 to 440 million metric tons, 58 to 180 million metric tons of which are in reservoirs with conditions suitable for miscible CO2-EOR (Finley, 2005). Untapped reserves remain locked in established mature oil fields as well as prospective greenfields waiting for development. CO2-EOR recovery in the ILB has the potential to be economically significant by improving oil recovery and providing possible storage of anthropogenic CO2, and CO2-EOR reservoirs could potentially be co-located (stacked) with saline storage options. CO2-EOR interests in the wider region may assist the economics of a storage project long-term, via potential revenue from sale of CO2 for EOR and/or by taking advantage of Carbon Capture and Storage (CCS) tax credits under 26. U.S. Code § 45Q (and 2018 FUTURE Act amendments). Pilot scale injection tests have been performed at a few locations across the ILB with positive indications of oil response, but there have been no field-scale applications of CO2-EOR in the ILB. Enhanced ILB oil field miscibility classification maps show additional reservoir-level detail and help expand the screening area for CO2-EOR opportunities in the East Sub-Basin. Examination of the oil fields and their productive reservoirs revealed the presence of several carbonate and siliciclastic candidates for miscible/near miscible and immiscible CO2-EOR in the East Sub-Basin study area. In addition, related studies have identified and assessed residual oil zones (ROZs) in sandstone and carbonate formations throughout the region. These results and ongoing work highlight key reservoirs in primary fields of interest and provide the basis for targeted oilfield and site-specific work in assessing the feasibility of industrial-scale CO2 storage and CO2-EOR in the Illinois East Sub-Basin study area.

01 COAL, LIGNITE, AND PEAT↗