Engineering topics

Carpenter, Paul

Publications and source records attributed to Carpenter, Paul.

9 records

NASA NTRS2007

Poisoning of Heat Pipes

Thermal management is critical to space exploration efforts. In particular, efficient transfer and control of heat flow is essential when operating high energy sources such as nuclear reactors. Thermal energy must be transferred to various energy conversion devices, and to radiators for safe and efficient rejection of excess thermal energy. Applications for space power demand exceptionally long periods of time with equipment that is accessible for limited maintenance only. Equally critical is the hostile and alien environment which includes high radiation from the reactor and from space (galactic) radiation. In space or lunar applications high vacuum is an issue, while in Martian operations the systems will encounter a CO2 atmosphere. The effect of contact at high temperature with local soil (regolith) in surface operations on the moon or other terrestrial bodies (Mars, asteroids) must be considered.

Gillies, Donald↗

NASA NTRS2006

Materials Requirements for Standard Lunar Highlands Regolith Simulants as Defined by the NASA Simulant Development Program

The development of surface technologies for NASA's human and robotic lunar program beyond 2010 has begun. The multitude of projects underway and future ones will soon rely on the availability of lunar regolith simulant materials chosen to simulate the characteristics of lunar regoliths in order to design, test and qualify prototype hardware and flight equipment. The selection and development of standard lunar regolith simulants (SLRS) for the use of NASA technology programs was one of the main recommendations of the 2005 Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. The realization of that objective is now underway through the NASA simulant development program at the Marshall Space Flight Center. The approach adopted to define materials requirements for standard simulants of regolith from the Highlands regions of the Moon will be presented along with a discussion of limitations inherent to such an endeavor.

Sibille, Laurent↗

NASA NTRS2006

Development Issues for Lunar Regolith Simulants

Significant challenges and logistical issues exist for the development of standardized lunar regolith simulant (SLRS) materials for use in the development and testing of flight hardware for upcoming NASA lunar missions. A production program at Marshall Space Flight Center (MSFC) for the deployment of lunar mare basalt simulant JSC-lA is underway. Root simulants have been proposed for the development of a low-T mare basalt simulant and a high-Ca highland anorthosite simulant, as part of a framework of simulant development outlined in the 2005 Lunar Regolith Simulant Materials Workshop held at MSFC. Many of the recommendation for production and standardization of simulants have already been documented by the MSFC team. But there are a number of unanswered questions related to geology which need ta be addressed prior to the creation of the simulants.

Rickman, Doug↗

NASA NTRS2006

Core Community Specifications for Electron Microprobe Operating Systems: Software, Quality Control, and Data Management Issues

Modem electron microprobe systems have become increasingly sophisticated. These systems utilize either UNIX or PC computer systems for measurement, automation, and data reduction. These systems have undergone major improvements in processing, storage, display, and communications, due to increased capabilities of hardware and software. Instrument specifications are typically utilized at the time of purchase and concentrate on hardware performance. The microanalysis community includes analysts, researchers, software developers, and manufacturers, who could benefit from exchange of ideas and the ultimate development of core community specifications (CCS) for hardware and software components of microprobe instrumentation and operating systems.

Fournelle, John↗

NASA NTRS2005

The Status of Simulant Materials of Lunar Regolith: Requirements, Feasibility, and Recommendations

Introduction: As NASA turns its exploration ambitions towards the Moon once again, the research and development of new technologies for lunar operations face the challenge of meeting the milestones of a fast-pace schedule, reminiscent of the 1960 s Apollo program. While the lunar samples returned by the Apollo and Luna missions have revealed much about the Moon, these priceless materials exist in too scarce quantities to be used for technology development and testing. The need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that is being addressed today through the collaboration of scientists, engineers and NASA program managers. While the larger size fraction of the lunar regolith has been reproduced in several simulants in the past, little attention has been paid to the fines fraction, commonly refered to as lunar dust. As reported by McKay and Carrier, this fraction of the lunar regolith below 20 microns can represent up to 30% by mass of the total regolith. The issue of reproducing the properties of lunar regolith for research and technology development purposes was addressed by the recently held Workshop on Lunar Regolith Simulant Materials at Marshall Space Flight Center. Preliminary conclusions from the workshop and considerations concerning the feasibility of producing such materials will be presented here.

Sibille, Laurent↗

NASA NTRS2004

Improvements in Electron-Probe Microanalysis: Applications to Terrestrial, Extraterrestrial, and Space-Grown Materials

Improvement in the accuracy of electron-probe microanalysis (EPMA) has been accomplished by critical assessment of standards, correction algorithms, and mass absorption coefficient data sets. Experimental measurement of relative x-ray intensities at multiple accelerating potential highlights errors in the absorption coefficient. The factor method has been applied to the evaluation of systematic errors in the analysis of semiconductor and silicate minds. Accurate EPMA of Martian soil stimulant is necessary in studies that build on Martian rover data in anticipation of missions to Mars.

Carpenter, Paul↗

NASA NTRS2003

Electron Probe MicroAnalysis (EPMA) Standards. Issues Related to Measurement and Accuracy Evaluation in EPMA

Electron-probe microanalysis standards and issues related to measurement and accuracy of microanalysis will be discussed. Critical evaluation of standards based on homogeneity and comparison with wet-chemical analysis will be made. Measurement problems such as spectrometer dead-time will be discussed. Analytical accuracy issues will be evaluated for systems by alpha-factor analysis and comparison with experimental k-ratio databases.

Carpenter, Paul↗

NASA NTRS2003

Accuracy Evaluation of Electron-Probe Microanalysis as Applied to Semiconductors and Silicates

An evaluation of precision and accuracy will be presented for representative semiconductor and silicate compositions. The accuracy of electron-probe analysis depends on high precision measurements and instrumental calibration, as well as correction algorithms and fundamental parameter data sets. A critical assessment of correction algorithms and mass absorption coefficient data sets can be made using the alpha factor technique. Alpha factor analysis can be used to identify systematic errors in data sets and also of microprobe standards used for calibration.

Carpenter, Paul↗

NASA NTRS2002

Energy Dispersive Spectrometry and Quantitative Analysis Short Course. Introduction to X-ray Energy Dispersive Spectrometry and Quantitative Analysis

This course will cover practical applications of the energy-dispersive spectrometer (EDS) to x-ray microanalysis. Topics covered will include detector technology, advances in pulse processing, resolution and performance monitoring, detector modeling, peak deconvolution and fitting, qualitative and quantitative analysis, compositional mapping, and standards. An emphasis will be placed on use of the EDS for quantitative analysis, with discussion of typical problems encountered in the analysis of a wide range of materials and sample geometries.

Carpenter, Paul↗