Search NASA⌕ Search

Engineering topics

Carpini, T. D.

Publications and source records attributed to Carpini, T. D..

An ultrasonic flowmeter for measuring dynamic liquid flow

A novel oscillating pipe system was developed to provide dynamic calibration wherein small sinusoidal signals with amplitudes of 0.5 to 10% of the steady-state flow were added to the steady-state flow by oscillating the flowmeter relative to the fixed pipes in the flow system. Excellent agreement was obtained between the dynamic velocities derived from an accelerometer mounted on the oscillating pipe system and those sensed by the flowmeter at frequencies of 7, 19, and 30 Hz. Also described were the signal processing techniques used to retrieve the small sinusoidal signals which were obscured by the fluid turbulence.

Carpini, T. D.↗

An anemometer for measuring velocities on the .25 to 4.25 M/sec range

A vane type anemometer was developed as a secondary standard for the on site calibration of wind velocity sensors. The instrument outputs an electrical pulse for each interruption of a light source by an eight vane fan. The pulse rate is proportional to the fan's angular speed and linearly related to wind velocity over the range 0.25 to 4.27 m/sec.

Carpini, T. D.↗

Gage for measuring coastal erosion and sedimentation

Underwater sand height gage, which measures heights up to 12 inches, is comprised of two standard flush-diaphragm pressure transducers. Gage is very sensitive to buried water heights and is useful as a research tool in study of wet earth and landslide phenomena.

Carpini, T. D.↗